Addtional_SPECS.docx

(INFO ONLY NOT FOR PRICING) MODULAR THERMAL SIGNATURE TARGETS; Thermal Signature Target heating element. The element shall be thin, flexible, and continuously conductive across its entire surface. The element construction consists of a flexible electrically conductive film laminated between two layers of insulating Mylar. Bus bars are included in the lamination and provide the electrical connection to the conductive film. Auto-splice leads are then connected to the copper bus bars. The auto-splice leads provide the means for the module to be connected to a power source. Each auto-splice lead terminals with a polarized, push-pull type, connector plug. When electrical power is applied, current flows across the conductive element and produces heat. The voltage Standard is 120 +/- 10 VAC. Each type must be capable of producing a surface temperature greater than 25 degrees ambient. The product must be powered by 120 +/- 10 VAC and be capable of being placed on a target or on a platform that heats the target.