The file's text, extracted by GovTribe without its formatting.
Solicitation W81XWH20Q0126 - Questions and Answers
Q1
Are there floorplans or scaled drawings to allow us to estimate coverage for the designated building?
A1
YES
Q2
Will there be existing PoE network ports in the IDF closets to connect the WiFi access points or do we need to account for switch infrastructure as well?
A2
You need to account for switch infrastructure.
Q3
Is there a technical POC for additional questions we may have?
A3
Yes – will be named at time of award for questions during installation.
Q4
Does NMHM require an onsite or cloud controller for the wireless solution?
A4
Cloud controller is preferred but onsite also acceptable.
Q5
Are there any ceilings that are taller than 10 feet in these buildings?
A5
Yes
Q6
Are there existing wiring closets in the buildings? If so how many?
A6
Yes. 2. The IM/IT closet is located next to the area called "C202" which is on the right of Gallery 2 (see attached Map – Where red “X” is located)
Q7
Will contractor be required to run cable for the new access points?
A7
Yes
Q8
Will contractor use existing cabling for the AP’s?
A8
Some existing cabling may be used if those cables are currently not in use.
Q9
Will contractor be required to integrate this solution into the existing NMHM network?
A9
No.
Q10
Does the NMHM network currently have a POE infrastructure?
A10
The NMHM has a POE system used for video camera recording.
Q11
Does NMHM currently have a wireless network
A11
No.
Q12
Will contractor be required to build an independent network to support this solution?
A12
Yes.
Q13
Does NMHM require 1G or 5G network connectivity to the new AP’s?
A13
1G should be sufficient.
Q14
Will the new wireless solution be physically segregated from the NMHM network?
A14
Yes
Q15
Will any classified information traverse the new wireless network?
A15
NO.
Q16
Are there any specific 802.11 protocols the NMHM would like deployed?
A16
The protocols need to be both forward and backward compatible
Q17
Is 802.1x a requirement for the new wireless network?
A17
Yes
Q18
Is all hardware required to be TAA compliant?
A18
Yes.
Q19
Will contractor be required to provide POE switches?
A19
Yes
Q20
Is there an incumbent contractor currently performing these services, have similar services been performed in the past, or is this a new requirement?
A20
New requirement.
Q21
If this is a follow-on requirement, could you please provide the previous contract or task order number?
A21
New requirement.
Q22
Can a second site visit be scheduled for this solicitation?
A22
No, Due to time constraints and the immediate need for a solution, a second site visit is not feasible in this time frame
Q23
Can this be set-aside for 8(a)?
A23
No, The acquisition strategy has been approved prior to soliciting this requirement.
Q24
Which areas require the Wifi signal?
A24
Wi-Fi signal is required for Gallery 1, Gallery2, Gallery 3, Gallery 4 (see attached Map).
Q25
Does the Government intend to purchase a system which meets all DoD networking requirements? DoD requires FIPS-140 encryption, intrusion detection, and other advanced features.
A25
This wireless network does not need to meet the DOD networking requirements as it is a commercial solution that will not be passing sensitive government data.
File details come from the government source that posted it.
Updated .
Department of the Army Medical Command