Amendment-Exhibit_A_Stryker_Handpieces.pdf

W81K00-17-T-0256

0011015011

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Add Exhibit A-List of Stryker Handpieces

1. CONTRACT ID CODE PAGE OF PAGES

J 1 16

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 31-May-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W81K00-17-T-0256

X 9B. DATED (SEE ITEM 11)

24-May-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

30-May-2017

CODE

W40M USA HLTH CONTRACTING ACT

SOUTHERN REG CONTR OFC

3551 ROGER BROOK DR BLDG 3600

FORT SAM HOUSTON TX 78234-6200

W81K00 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 2001

The CLIN extended description has changed from:

William Beaumont Army Medical Center, Fort Bliss, TX, has a requirement for a Contractor to provide under a non-personal service contract on-site full service maintenance, preventative and repair services on the Stryker Surgical Hand-pieces as described in the Performance Work Statement (PWS). Contractor shall furnish all parts, labor, equipment, materials, travel, and transportation to perform all maintenance. Base Year POP: 1 October 2017-30 September 2018

To:

William Beaumont Army Medical Center, Fort Bliss, TX, has a requirement for a Contractor to provide under a non-personal service contract on-site full service maintenance, preventative and repair services on the Stryker Surgical Hand-pieces as described in the Performance Work Statement (PWS). Contractor shall furnish all parts, labor, equipment, materials, travel, and transportation to perform all maintenance. Option Year

(2) POP: 1 October 2019-30 September 2020 .

SUBCLIN 2001AA

The CLIN extended description has changed from:

Full Service Maintenance Stryker Surgical Handpieces Option Year (2) Period of Performance: 1 October 2019-30 September 2020 “Payment will be made for actual items ordered, received and accepted by the Government. TAS 97-0130.”

To:

Full Service Maintenance Stryker Surgical Handpieces Option Year (2) Period of Performance: 1 October 2019-30 September 2020 “Payment will be made for actual items ordered, received and accepted by the Government. TAS 97-0130.”.

The following have been modified:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

William Beaumont Army Medical Center, El Paso, Texas, has a requirement for a full service on-site maintenance contract. Contractor shall furnish all parts, labor, equipment, materials, travel, and transportation to perform all scheduled and unscheduled maintenance for the equipment listed below.

1. STRYKER HANDPIECES-SEE ATTACHED E X H I B I T ( A )

1. CONTRACTOR REQUIREMENTS:

1.1 Contractor will provide only technically qualified technicians who are formally trained on the above equipment. Service personnel must have a good working knowledge of the equipment.

1.2 Contractor provides a plan for service coverage if less than two (2) personnel are trained on the equipment. The plan describes and ensures the Government is not without service support for more than one day (i.e., coverage during technician illnesses, vacations, terminations, and /or strikes).

1.3 Contractor shall obtain the most current legal editions of the original equipment manufacturer (OEM) literature or approved copies.

1.4 Contractor shall furnish and install only OEM repair parts and OEM recommended substitution/ modifications, as required ensuring proper and safe operation of the equipment.

1.5 Contractor shall have knowledge of, furnish and install all OEM sponsored modifications at the next interval.

1.6 If the Contractor is unable to repair the unit and subcontracts out to a third party, the Contractor will not stop the third party in the middle of the repair job and will not charge the Government for the subcontracted labor.

2. MAINTENANCE TIME FRAMES:

The Contractor shall provide (2) preventive maintenance (PM) and (1) annual calibration verification check (CVC). The Contractor shall perform CVC in conjunction with the preventive maintenance services. Services during the time frame will include one (1) electrical safety current leakage test to determine the amount of electrical current electrical leakage to the case of the unit. All services performed are documented and indicated on the service ticket upon completion of services as follows:

(a) Calibration: CA with the time spent

(b) Preventive Maintenance INSP is inspection with the time spent, the electrical safety test is considered to be part of this process.

(c) Scheduled Parts Replacement SPR with the time, name, and part numbers with cost of parts replaced.

3. SCHEDULED SERVICES:

3. 1 The Contractor shall complete all required scheduled services within 4 working days after starting each scheduled services.

3.2 The Contractor shall coordinate with the Contracting Officer Representative (COR), to ensure access to the equipment to be serviced, no later than the 4th working day of the month scheduled for service.

4. UNSCHEDULED SERVICES:

4.1 All repairs must be accomplished and the unit fully operational within three (3) working days of telephonic notification of a malfunction. These days are Monday through Friday, excluding all Government holidays. All equipment is repaired to meet manufacturers specifications at all times.

4.2 The Contractor shall respond telephonically within four (4) hours during normal duty hours days and within six (6) hours after normal duty hours/or weekends/holidays.

4.3 Delays caused by the Government must be promptly communicated to the COR and will not counted against the repair completion time frame.

4.4 If parts are required and are not in stock with the original equipment manufacturer, an allowable delay will be determined by the COR.

4.5 The Contractor shall provide for all replacements of worn and/or defective parts necessary to restore the equipment to 1 0 0 % operational condition as specified by the OEM.

4.6 HOURS OF OPERATION: Medical Maintenance Branch, WBAMC, office hours 7:30 A.M. thru 4:30 P.M., MST, Monday thru Friday. Overtime hours are not allowed in accordance with the contract.

5. SERVI CE R E PORTS:

U pon completion of services, a service report shall be provided to the COR. This report is i nitiated by the Contractor at the com pletion of each repair and at the minimu m will include:

(1) Contractor's name

(2) Contract number

(3) Name of technician performing the repair (full printed and signed name)

(4) Number of hours expended on each and associated Contractor's hourly rate. Hours are in tenths and rounded up to the nearest tenth of an hour. Example 1.1 is one hour and six minutes.

(5) Part number and listed cost of each repair part used

(6) Equipment Control Number and serial number of equipment being repaired.

6. GOVERNMENT FURNISHED PROPERTY AND MATERIALS:

The COR will provide the contractor access to the equipment covered under the contract.

7. CONTRACTOR FURNISHED PROPERTY:

7. 1 All materials, other than those materials specified as Government furnished, required in the performance of this contract shall be furnished by the Contractor.

7.2 Availability of manufacturer's service literature needed in the performance of the contract will be Contractor's responsibility and will remain Contractor owned at the termination of the contract.

7.3 Equipment maintenance performance under the contract includes the unlimited replacement of defective repair parts that the contractor determined to have failed under proper use.

7.4 Contractor shall notify the COR immediately when parts required to accomplish a maintenance service are not available from the original manufacturer.

7.5 The Government shall not be responsible for any damages or loss of Contractor supplies, materials, or equipment caused by persons outside the government control.

7.6 The Government shall not be responsible for any damages or loss of the Contractor's personal belongings, or those of the Contractor's employees, due to fire, theft, accidents or other causes beyond reasonable control of the government.

8. PERSONS AUTHORIZED TO PLACE SERVICE CALLS

The Government's COR as well as those authorized to give instructions, place service calls, or request updates status, are listed below No instructions will be accepted by anyone other than the people listed below or the Contracting Officer. One of the persons listed below will call and leave their name and number and the Contractor will return the call, or come directly to the COR in room 3K4 of the Bradley Building to verify the call prior to initiating any action.

Chief, Medical Maintenance Branch (CW3 Charles Judd) (915) 742-2705 COR, Contract Service - (Patricia Batzel) (915) 742-2721

9. SCOPE OF WORK

9.1 Qualified Technician shall report to the Medical Maintenance Branch, Bradley Building, Room 3K4, and sign-in the Contractor's Log by indicating company name, individuals name, time of arrival, and destination. When departing WBAMC, the technician must exist through Medical Maintenance and provide the service report with applicable information.

9.2 At minimum the performance of all services shall meet or exceed the specifications of the original equipment manufacturer.

9.3 The Contractor is not responsible for the maintenance of equipment listed when damage resulted from act of God, or Government neglect/misuse/abuse, or when services from other than the Contractor's personnel have been performed.

9.4 The Contractor shall provide unscheduled maintenance services for the equipment covered under the contract in accordance with section 4 above.

9.5 The Contractor shall perform scheduled preventive maintenance inspection two (2) times per year and calibrated/verification/certification per year, on the equipment listed in paragraph A.

9.6 The Contractor shall establish and follow a procedural checklist when performing scheduled services. Any updates shall be supplied to the COR.

9.7 The Contractor shall comply with applicable federal, state, and local laws and regulations.

9.8 The Contractor shall ensure that all maintenance services are performed in accordance with the requirements set forth in applicable laws.

9.9 The Contractor shall complete DD Form 2164 in accordance with the instruction provided in TB 38-750-2. A continuation sheet shall be attached to the DD Form 2164 indicating the manufacturer, model, serial number, and date of calibration expiration of all items of test and measurement equipment used to perform the calibration. Required forms and extracts from pertinent directives will be furnished to the contractor by the government.

9.10 When CVC services are complete, the Contractor shall affix a DD Form 2163 to the equipment; update the current form, when appropriate, as specified 750-1. The COR shall determine where on the equipment the DD Form will be affixed.

9.11 Upon completion of each repair or service, the Contractor shall provide the COR with a Service Report not later than the second duty day following the performance of each maintenance service.

9.12 The Contractor shall have available or have reasonable access to all repair parts to maintain the equipment. Delays caused by Government will not be counted as contractor "down time" for the purpose of this requirement.

9.13 Repair services shall continue uninterrupted until the equipment is fully operational.

If the Contractor determines that additional parts are required, services will resume as soon as parts become available.

9.14 When it is questionable as to whether a malfunction exists with the Contractor maintained equipment or the Government's utilities (i.e., water, air, electricity). The COR shall notify the Government's maintenance representative and establish an arrival time for said representative will arrive at the job site within 30 minutes or less upon notification by COR. The Contractor's maintenance representative shall remain at the site, with the Government's maintenance representative. The utilities will be tested; it will then be determined what failed (the utility or the equipment). Should it be determined that the Contractor maintained equipment malfunctioned, the Government shall be reimbursed by the Contractor for the added costs for chargeable maintenance time spent testing utilities.

10. REPLACEMENT REPAIR PARTS:

10.1 The Contractor shall have and maintain an adequate inventory of repair parts to service the equipment listed herein as may be needed in the performance of this contract.

10.2 Repair parts used in the performance of this contract shall be new or reconditioned, however, Government approved reconditioned repair parts shall be the only reconditioned repair parts allowed for performance of services under this contract.

10.3 Parts which have been replaced with Contractor furnished parts shall become the property of the Contractor. Parts once placed in a system or sub-system becomes the property of the Government.

10.4 The Contractor shall replace all worn, failed, or defective components and parts that have failed under proper use with no further cost or charge to the Government.

11. CONTRACTOR PERSONNEL:

11.1 The Contractor shall provide technically qualified technicians to accomplish all maintenance services required by the contract. Repair technician must have received training in accordance with the contractor's standard training policy.

11.2 The Contractor shall designate a Point of Contact (POC) for the contract. The Contractor's POC shall be authorized to discuss with the COR, any and all maintenance services required by the contract and ensure response to requests for performance of the contract. The POC shall have the authority to make decision for the Contractor. The Contracting Officer or the COR shall be notified promptly whenever the POC changes.

Contractor's POC shall be submitted no later than I 0 days after award of contract, and shall include as a minimum name, title, and telephone number.

11.3 The Contractor shall not hire off-duty Government employees who serve as inspector or COR's in their Government position, or any other persons whose employment would result in a conflict of interest.

11.4 The Contractor shall provide each employee an identification badge which shall be displayed on their outer garment at all time when on duty. The badge shall include, as a minimum, the employee's name, current picture, the Contractor's name, and title identification.

12. SAFETY:

12.1 When the Contractor leaves on-site location where maintenance services are being performed, the site shall be left in same condition.

12.2 Equipment which is left unserviceable at the end of normal duty hours or until performance can be resumed, will be identified by the Contractor attaching DD Form 1577 (TAG) to the equipment in plain view of hospital staff. The COR will be informed personally or in writing of the equipment status prior to the Contractor leaving the work site.

13. APPLICABLE PUBLICATION AND FORMS - Publications documents and forms applicable to this PWS are listed below. The Contractor is required to comply with these directives. Supplements or amendments may be issued during the life of the contract and will be considered to be in full force and effective immediately upon receipt by the Contractor. If compliance with such supplements and amendments changes the contract cost, it shall be a change within the meaning of the "Changes" clauses of the contract.

14. ARMY PUBLICATION - Army publications shall be made available to the Contractor during the period of the contract. These publications are located in the Medical Maintenance Branch, WBAMC.

AR 40-5 Preventive Medicine

AR 40-61, Medical Logistics Policies and Procedures

SB8-75-11 Supplement to AR 40-61

TB MED 7, Maintenance Expenditure Limits for Medical Equipment TB MED 750-1, Operating Guide for Medical Equipment Maintenance

15. OTHER PUBLICATIONS -The following publications will be acquired by the Contractor for his use at his own expense. These publications are other than Army publications which establish guidelines for administering adequate healthcare services. When a conflict between these publications and Army publications arises, the publication which is more restrictive will be followed.

Joint Commission of Accreditation of Healthcare Organization Manual (Current edition)

National Fire Protection Association (NFPA) 99, Health Facilities Handbook, (Current edition).

National Fire Protection Association (NFPA) 101, Life Safety Code, (Current edition).

16. DOCUMENTATION FORMS -No Contractor developed forms will be used except those used as a Service Report.

The forms listed below will be provided to the Contractor by the Government for use in the performance of this contract.

DD Form 1577, Warning Tag.

DD Form 2163, Medical Equipment Verification/Certification.

17. DEFINITIONS: Terms used throughout this contract have the following meaning:

17.1 CALIBRATIONNERIFICATION/CERTIFICATION (CVC) -The comparison of a system or device of unverified accuracy to measure system or device of known accuracy to detect and correct deviations from required performance specifications/standards. Required performance specification/standards are detailed within the original manufacturer's service literature/manuals and Federal publications.

17.2 MAINTENANCE SERVICE -An action taken to keep equipment in a serviceable condition in accordance with original equipment manufacturer's specifications. It includes the systemic care, inspection, service, repair, testing of equipment, and repair parts.

17.3 PREVENTIVE MAINTENANCE (PM) -A systematic scheduled inspection of equipment per the original manufacturer's literature/service manual. Preventive maintenance includes, but is not limited lubrication, cleaning, inspections, functional tests and adjustments.

17.4 SCHEDULED SERVICES -Periodic maintenance services to medical equipment at Government prescribed times during the contract period. These services includes PM and CVC.

17.5 ON-SITE MAINTENANCE SERVICE -Scheduled and unscheduled maintenance performed at the Government’s facility and location where the equipment is utilized in the treatment and care of patients.

17.6 TEST, MEASUREMENT, AND DIAGNOSTIC REQUIREMENT (TMDE).

An instrument or device, the accuracy of which is directly traceable to the National Bureau of Standards, natural physical constant, or material with known performance characteristics, which is used to provide maintenance services on equipment listed in this contract.

17.7 UNSCHEDULED SERVICES -A repair service performed on an as required basis when an equipment item or system fails to perform as specified by the original equipment manufacturer. These are commonly referred to as repairs.

18. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP)

Government Quality Assessment and Improvement (QA&I): The government will monitor the contractor's performance under this contract using the quality and improvement procedures established by William Beaumont Army Medical Center and pursuant to the Inspection of Services Clause. Additionally the contractor's performance is subject to schedule and unscheduled review by quality assessment personnel as defined by the Quality Assurance Surveillance Plan.

PERFORMANCE

OBJECT

PERFORMANCE

STANDARD

REFERENCE

METHOD OF

ASSESSMENT

Reporting Requirements

Ensure that all technicians report to the Bradley Bldg, Room 3K4.

Para 9.1

Verify (COR) Log Book

Field Service Reports

Ensure the Field Service Report (FSR) - is provided to the COR upon completion of PM or repair.

Para. 5

Confirm FSR is provided to the

COR.

Scheduled/Unscheduled PM's and Repairs

All repairs must be accomplished and the unit fully operational within 3 working days.

Para 4.1

Confirm all repairs are completed.

RANGE RATING

(91-100) Exceptional

(81-90) Very Good

(71-80) Satisfactory

(61-70) Marginal

(less than 61) Unsatisfactory

19. CONTRACTOR MANPOWER REPORTING

ACCOUNTING FOR CONTRACT SERVICES-The Office of the Assistant Secretary of the Anny (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the contractor will report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor is required to completely fill in all the information in the format using the following web address https://cmra.anny.mil The required information includes the following:

(1) Contracting Office, Contracting Officer, Contracting Officer's Technical Representative;

(2) Contract number, including task and delivery order number;

(3) Beginning and ending dates covered by reporting period;

(4) Contractor name, address, phone number, e-mail address, identity of contractor employee entering data;

(5) Estimated direct labor hours (including sub-contractor);

(6) Estimated direct labor dollars paid this reporting period (including sub-contractor);

(7) Total payments (including sub-contractor);

(8) Predominant Federal Service Code (FSC) reflecting services provided by contractor (and separate predominant FSC for each sub-contractor if different);

(9) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Anny Requiring Activity is responsible for providing the contractor with its UIC for the purposes of reporting this information);

(10) Locations where contractor and sub-contractors perform the work (specified by zip code in the United States and nearest City, County, when in an overseas location, using standardized nomenclature provided on website);

(11) Presence of deployment or contingency contract language, and,

(12) Number of contractor and sub-contractor employees deployed in theater this reporting period (by country).

As part of its submission, the contractor will also provide the estimated total cost (if any) incurred to comply with this rep01ting requirement. This cost will be reflected on a separate line item and can be invoiced upon completion of the report.

Reporting period will be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year.

The contractor shall notify the Contracting Officer's Representative (COR) by the 5th working day of November whether or not they have completed this report. If the COR is unavailable, the contractor will notify the Contracting Officer.

EXHIBIT (A)

Repair Items Exhibit A - Section A .

Instruments Serial 11

0408655000W Flyte Charger ProCare 1130501143

0408655000W Plyte Charger ProCare 1130501133

5400130000W CORE Sumer Drill ProCare TBD

5400700000W Bone Mill ProCare TBD

6400015000W RemB Micro Drill ProCare 1222901053

6400015000W RemB Micro Drill ProCare 1226106163

6400015000W RemB Micro Drill ProCare 1226106193

6400015000W RemB Micro Drill ProCare 1226106203

6400015000W RemB Micro Drill ProCare 1226106263

6400015000W RemB Micro Drill ProCare 1226106303

6400015000W RemB Micro Drill ProCare 1227100183

6400015000W RemB Micro Drill ProCare 1227100193

6400015000W RemB Micro Drill ProCare TBD

6400015000W RemB Micro Drill ProCare TBD

6400015000W RemB Micro Drill ProCare TBD

6400015000W RemB Micro Drill ProCare TBD

6400015000W RemB Micro Drill ProCare TBD

6400015000W RemB Micro Drill ProCare TBD

6400031000W RemB Oscillating Saw ProCare 1222900713

6400031000W RemB Oscillating Saw ProCare 1222900813

6400031000W RemB Oscillating Saw ProCare 1222901013

6400031000W RemB Oscillating Saw ProCare 1222901023

6400031000W RemB Oscillating Saw ProCare 1222901053

6400031000W RemB Oscillating Saw ProCare 1226106163

6400031000W RemB Oscillating Saw ProCare 1425901083

6400031000W RemB Oscillating Saw ProCare 1425901093

6400031000W RemB Oscillating Saw ProCare TBD

6400031000W RemB Oscillating Saw ProCare TBD

6400031000W RemB Oscillating Saw ProCare TBD

6400031000W ReinI3 Oscillating Saw ProCare TBD

6400031000W RemB Oscillating Saw ProCare TBD

6400031000W RemB Oscillating Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare 1220903403

6400034000\V Retn13 Sagittal Saw ProCare 1226914953

6400034000W RemB Sagittal Saw ProCare 1226915033

6400034000W RemB Sagittal Saw ProCare 1226915113

6400034000W RemB Sagittal Saw ProCare 1226915123

6400034000W RemB Sagittal Saw ProCare 1226915133

6400034000W RemB Sagittal Saw ProCare 1430203473

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400034000W RemB Sagittal Saw ProCare TBD

6400037000W RemB Recip Saw ProCare 1221402013

6400037000W RemB Recip Saw ProCare 1221402243

6400037000W RemB Recip Saw ProCare 1221402343

6400037000W RemB Recip Saw ProCare 1221402373

6400037000W RemB Recip Saw ProCare 1221902403

6400037000W RemB Recip Saw ProCare 1221402423

6400037000W RemB Recip Saw ProCare 1428623203

6400037000W RemB Recip Saw ProCare TBD

6400037000W RemB Recip Saw ProCare TBD

6400037000W RemB Recip Saw ProCare TBD

6400037000W RemB Recip Saw ProCare TBD

6400037000W RemB Recip Saw ProCare TBD

6400037000W RemB Recip Saw ProCare TBD

6400037000W Ren113 Recip Saw ProCare TBD

6400037000W RemB Rccip Saw ProCare TBD

6400062000W RemB Dedicated Driver ProCare 1221401453

6400062000W RemB Dedicated Driver ProCare 1221600253

6400062000W RemB Dedicated Driver ProCare 1221600393

6400062000W RemB Dedicated Driver ProCare 1222605933

6400062000W RemB Dedicated Driver ProCare 1222605943

6400062000W RemB Dedicated Driver ProCare 1222605953

6400062000W RemB Dedicated Driver ProCare 1428623903

6900062000W RemB Dedicated Driver ProCare 1428623923

6400062000W RemB Dedicated Driver ProCare TBD

6900062000W RemB Dedicated Driver ProCare TBD

6400062000W RemB Dedicated Driver ProCare TBD

6400062000W RemB Dedicated Driver ProCare TBD

6400062000W RemB Dedicated Driver ProCare TBD

6400062000W RemB Dedicated Driver ProCare TBD

6400062000W Rern13 Dedicated Driver ProCare TBD

6400099000W Rem13 U-Driver ProCare 1224100583

6400099000W RemB U-Driver ProCare 1224100593

6400099000W RemB U-Driver ProCare 1224100773

6400099000W RemB U-Driver ProCare 1428624383

6400099000W RemB U-Driver ProCare 1428624393

6400099000W RemB U-Driver ProCare 1428624743

6400099000W RemB U-Driver ProCare 1428624753

6400099000W RemB U-Driver ProCare 1428624763

6900099000W Ren113 U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

6400099000W RemB U-Driver ProCare TBD

5400050000W CORE Console ProCare 1406600103

5400050000W CORE Console ProCare 0915303763

5900050000W CORE Console ProCare 0915300593

5400050000W CORE Console ProCare 0708800563

7207000000W System 7 Sternum Saw ProCare 1611609053

7207000000W System 7 Sternum Saw ProCare 1622806333

7207000000W System 7 Sternum Saw ProCare 1622806373

7207000000W System 7 Sternum Saw ProCare 1622806553

0408600000W Flyte Helmet 0408600000W Flyte Helmet ProCare

6400000000W Rem B Attachment ProCare

7207000000W System 7 Sternum Saw ProCare 1622806313

7 7000000000W System

(End of Summary of Changes)