W56HZV22R0147 Combined Synopsis and Solicitation.pdf

Name of Offeror or Contractor:

Combined Synopsis and Solicitation

W56HZV22R0147

DTS DAS Calibration, Repair, and Equipment

I. INTRODUCTION

A. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

B. The combined synopsis and Request for Quotation (RFQ) number is:

W56HZV22R0147

C. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-07, (10 August 2022).

D. Small Business Set-Aside: NO

E. Posting Date: TBD

F. Response Date: TBD

G. Contracting Office: Army Contracting Command – Detroit Arsenal (ACC-DTA)

6501 E. Eleven Mile, Detroit Arsenal, MI 48397.

Contract Specialist: Kelly Germano, email: kelly.l.germano.civ@army.mil

H. The NAICS code applicable to this acquisition is 541715 with a size standard of 1000 Employees. Offeror must be certified under this NAICS code prior to receiving an award. This solicitation will result in only one (1) award.

I. This Combined Synopsis Solicitation contains clauses and provisions requiring a fill-in or representation. Offeror shall submit a copy of this Combined Synopsis Solicitation with their quote and respond to these clauses and provisions accordingly. A failure to complete these fill-ins may cause your offer to be determined ineligible for award.

J. Basis for award- The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals before the closing date of this solicitation. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

CONTINUATION SHEET

Reference No. of Document Being Continued

W56HZV-22-R-0147

PIIN/SIIN MOD/AMD

of 49 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/12.htm#P263_45123

II. GENERAL REQUIREMENT

A. The U.S. ARMY GROUND VEHICLE SYSTEMS CENTER (GVSC) in Harrison Township, Michigan has a requirement for DTS DAS Calibration Repair and equipment replacement. Please refer to the individual line items in the text within the document.

Offeror shall include all shipping charges and deliver supplies F.O.B. DESTINATION to the following address: 44030 Schilling St, Building 1426 Harrison Township, MI 48045

Offeror shall satisfy requirement over a period of performance of:

5 ordering Periods

B. This acquisition is unrated under the Defense Priorities and Allocations System (DPAS).

C. Quotes must be received by ACC-DTA no later than TBD. Email offers to kelly.l.germano.civ@army.mil. Offeror must be registered in System for Award Management (SAM) prior to receiving an award. Refer to website https://www.sam.gov/portal/public/SAM/.

D. Questions are requested via email ONLY and addressed to Kelly Germano, email: kelly.l.germano.civ@army.mil

SUPPLEMENTAL INFORMATION

Buyer Name: KELLY GERMANO

Buyer Office Symbol/Telephone Number: CCTA-HDT-D/(586)282-6349 Type of Contract 1: Firm Fixed Price

Type of Contract 2: Fixed Price Level of Effort Kind of Contract: Service Contracts

*** End of Narrative A0000 ***

A.1 Electronic Contracting

(a) All Army Contracting Command Detroit Arsenal solicitations will be publicized on the System for Award Management website (https://www.sam.gov ). Any additional attachments, including Technical Data Packages (TDPs) when available electronically, will be separate attachments or links embedded in the solicitation.

(b) As of 10 August 2015, unless directed to do otherwise in Section L of this solicitation, vendors are required to submit a quote or proposal on the website SAM.gov.

(c) Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time. The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with

FAR 15.208(a), offerors are responsible for submitting proposals, and any revisions, and modifications, so as to be received by the Government office designated in the solicitation by the time specified.

(d) It is the responsibility of the Offeror to ensure the proposal/quote is received by the date and time specified on the cover page of this solicitation. In accordance with FAR 15.208, if the proposal/quote was not received at the initial point of entry to the Government infrastructure (in this case, received through SAM) by the exact date and time specified on the cover page of this solicitation, it will be determined late. Proposal/quote is defined to mean ALL volumes or parts required in the solicitation are included in the electronic submission.

Note: There is no "expected" or "target" length of time for proposal submission; size and content may be factors, therefore offerors are strongly cautioned when submitting proposals to allow adequate time for submission.

(e) Solicitations may remain posted on www.SAM.gov after the solicitation closing date. If the response deadline has passed https://www.sam.gov/portal/public/SAM/ http://www.sam.gov/ for the solicitation, vendors will no longer be able to submit electronic responses.

(f) Any award issued as a result of this solicitation will be distributed electronically. In the event of a FOIA request for a copy of any award issued as a result of this solicitation, or any subsequent modifications to the contract, the contract and modifications will be released, including the awarded unit price. This is the notice required by Executive Order 12600

(June 23, 1987) of the Governments intention to release unit prices in response to any request under the Freedom of

Information Act (FOIA), 5 USC 552. Unit price is defined as the contract price per unit or item purchased as it appears in

Section B of the contract and is NOT referring to nor does it include Cost or Pricing data/information. If an Offeror objects to such release in the base contract or contract modifications, the Offeror must notify the contracting officer in writing prior to the closing date identified in this solicitation and include the rationale for the objection consistent with the provisions of FOIA. A release determination will be made based on rationale given.

(g) Questions pertaining to this solicitation should be directed to the Contract Specialist identified on the cover page of this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center.

A.2 ACKNOWLEDGEMENT OF AMENDMENTS

Acknowledge all the amendments received from the Government by identifying the amendment number and its issue date below:

Amendment Number: Date:

A.3 ARMY CONTRACTING COMMAND DETROIT ARSENAL (DTA) OMBUDSPERSON

http://www.aptac-us.org/

Information regarding the Ombudsperson for this contract is located at the following website:

https://www.tacom.army.mil/ombudsperson . (Best viewed using Google Chrome or Microsoft Edge)

A.4 ALL OR NONE

Offers in response to this solicitation must be submitted for the total quantity of the items identified in the solicitation.

(1) ONLY ONE AWARD WILL BE MADE AS A RESULT OF THIS SOLICITATION.

*** END OF NARRATIVE A0001 ***

Reference No. of Document Being Continued

W56HZV-22-R-0147

PIIN/SIIN MOD/AMD

http://www.tacom.army.mil/ombudsperson

W56HZV-22-R-0147

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SUPPLIES OR SERVICES AND PRICES/COSTS

DAS CALIBRATION

SERVICE REQUESTED: ORDERING YEAR ONE

CLIN CONTRACT TYPE:

Firm Fixed Price

In accordance with Section C and attachment 0001 of thi contract, the contractor shall provide all services nec to calibrate the DAS's. Delivery shall be in accordance the requirements detailed in the individual task order.

(End of narrative B001)

Inspection and Acceptance

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance

DEL REL CD QUANTITY DAYS AFTER AWARD

001 1 0365

DAS EQUIPMENT

contract, the contractor shall provide DAS equipment. D shall be in accordance with the requirements detailed i individual task order.

DAW REPAIRS

LO

s essary with livery the

W56HZV-22-R-0147

Fixed Price Level of Effort contract, the contractor shall provide all repairs nece to the DAS's. Delivery shall be in accordance with the requirements detailed in the individual task order.

ssary

SERVICE REQUESTED: ORDERING YEAR 2

In accordance with Section C and attachment 0001 of this contract, the contractor shall provide all services necessary to calibrate the DAS's. Delivery shall be in accordance with the requirements detailed in the individual task order.

SERVICE REQUESTED: ORDERING YEAR TWO

W56HZV-22-R-0147

DAS REPAIR

SERVICE REQUESTED: ORDERING YEAR TWO

In accordance with Section C and attachment 0001 of this contract, the contractor shall provide all repairs necessary to the DAS's. Delivery shall be in accordance with the requirements detailed in the

SERVICE REQUESTED: ORDERING YEAR THREE

W56HZV-22-R-0147

W56HZV-22-R-0147

SERVICE REQUESTED: ORDERING YEAR FOUR

DAS REPAIRS

SERVICE REQUESTED: ORDERING YEAR FIVE

W56HZV-22-R-0147

CONTRACT DATA REQUIREMENTS LIST

W56HZV-22-R-0147

W56HZV-22-R-0147

Entire Solicitation and Resulting in Contract:

FIRST ORDERING YEAR OF THE CONTRACT IS THE DATE

OF AWARD PLUS 364 DAYS.

SECOND ORDERING YEAR OF THE CONTRACT IS 365 DAYS

THROUGH 729 DAYS AFTER CONTRACT AWARD.

THIRD ORDERING YEAR OF THE CONTRACT IS 730 DAYS

THROUGH 1,094 DAYS AFTER CONTRACT AWARD.

FOURTH ORDERING YEAR OF THE CONTRACT IS 1,095

DAYS THROUGH 1,459 DAYS AFTER CONTRACT AWARD.

FIFTH ORDERING YEAR OF THE CONTRACT IS 1,460

DAYS THROUGH 1,824 DAYS AFTER CONTRACT AWARD.

NOTE: THE PRICE APPLICABLE TO AN INDIVIDUAL

ORDER IS THE PRICE FOR THE ORDERING YEAR IN

WHICH THE ORDER IS ISSUED. THE DELIVERY DATE

DOES NOT DETERMINE THE ORDERING YEAR.

The information presented below applies to

Item No. 1001 Through 5003:

Minimum 5-Year Quantity: $105,000 EACH

(This will be ordered at the time of the basic contract award).

Maximum 5 Year Quantity: $2,156,207.00

(Inclusive of Option Years, if applicable)

ONLY THE MINIMUM 5 YEAR QUANTITY IS

GUARANTEED.

*** END OF NARRATIVE B0001 ***

W56HZV-22-R-0147

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Performance Work Statement

Data Acquisition System (DAS) Parts, Calibration, Repair and Development

C.1 Safety and Medical Requirements C.1.1 The contractor shall comply with Public Law 91-596 and each occupational safety and health standard promulgated under this act. The contractor shall execute supervision to ensure immediate compliance with pertinent provisions of applicable regulations. Safety regulations, standard operating procedures, and guidance issued by the Department of the Army, U.S. Army

Futures Command (AFC), U.S. Army DEVCOM Ground Vehicle Systems Center (GVSC), and TACOM LCMC Installation Commander also apply to the contractor.

C.1.2 The contractor shall perform all operations in strict compliance with all applicable safety and health procedures. The contractor shall report incidents of injury or occupational illness or disease, and/or damages to Government property resulting from work performed at GVSC location to the COR. Each incident shall be reported within 72 hours of occurrence and shall be delivered using applicable Government-furnished guidance and forms.

C.2 Security C.2.1 Contractor employees shall show current state or federally issued picture identification to gain access to GVSC facilities. The Government will issue restricted temporary area badges to contractor employees granted access to restricted

GVSC facilities in accordance with the following procedures:

a. Badges cannot be passed from one individual to another for entry into restricted areas.

b. Badges are to be worn only in the restricted area and removed from sight upon exiting the area.

c. Badges are not to be used as a means of identification outside of the restricted area.

d. Badges are to be protected in such a manner as to preclude unauthorized access by another individual.

e. Badges are to be returned at the conclusion of the visit or at the end of a period of authorized use.

f. Use and entry of portable electronic devices (e.g., cell phones, laptops, wireless electronic devices, removable media) to Government restricted areas is governed by GVSC and Selfridge Air National Guard Base (SANGB) installation policies. These policies pertain to Contractor-owned and personal property.

C.2.2 At a minimum, the following statements apply for all information that is assigned a distribution statement the performance of tasks in accordance with DoD Directive 5230.24, distribution Statements on Technical Documents or is

Controlled Unclassified Information (CUI)/Sensitive Unclassified Information (SUI):

a. Distribution of information/reports of this contract shall be limited to personnel associated with this contract.

b. Electronic files, documents, and Government furnished materials that are no longer needed and that are unclassified/sensitive or classified shall be destroyed by GVSC designated shredders, through GVSC authorized collection derbies, or via GVSC provided electronic degaussing services.

C.3 Place of Performance C.3.1 All work shall be performed at the contractors facilities.

C.4 Background The GVSC Occupant Protection Laboratory (OPL) conducts in-house laboratory tests and off-site live fire test and evaluation tests in support of fielding technologies to reduce the injuries to soldiers during blast and crash events in Army ground vehicle systems. The OPL conducts these tests with the use of a Data Acquisition System (DAS) within their Anthropomorphic

Test Devices (ATDs) to record the injury data from the test events. The OPL must maintain, repair, replace parts, and calibrate these DAS systems yearly to ensure they are functioning within the designed specifications and to ensure it is collecting data accurately.

The task order PWS will detail the work to be performed by the contractor to repair, modify, and calibrate the DAS and its components, to provide support with hardware and software in the OPL and off-site at testing sites.

C.5 Objective The objective is for the contractor to provide technical support, repairs, calibration, and procurement of OPL's ATD DAS systems and components, as well as development and fabrication of replacement parts.

C.6 Requirements The contractor shall repair and calibrate the ATD DAS and all its components to ensure they are performing according to accepted standards (SAEJ211, ISO 6487, ISO 17025) and is recording data accurately.

C.6.1 Calibration Services The contractor shall provide calibration services for the OPLs ATD DAS system and its components. The calibration shall include:

Visual Inspection of Component: The contractor shall visually inspect each component to identify any deficiencies or abnormalities.

Signal Amplitude Linearity Test: The contractor shall test the linearity of the signals of each component and certify the signal output is within the standard (ISO 6487).

System Time Base and Event Timing Test: The contractor shall validate the event timing of each component is in sync and functioning correctly.

Anti-alias Filter Validation: The contractor shall validate the anti-alias filter of each component is functioning correctly and within the standard (SAE J211).

Excitation Accuracy and Overload Protection Test: The contractor shall test each component to ensure the component is protected from overload.

Update Internal Calibration Factors: The contractor shall update the internal calibration factors of each component to ensure the component is functioning correctly.

C.6.2 The contractor shall identify any components or components that do not pass the tests listed above and notify the Government of such results. The contractor shall also recommend to the Government replacement parts or procedures to correct these deficiencies.

C.6.3 The contractor shall provide fabrication services of specific components as requested by the COR and provide COR

W56HZV-22-R-0147

updated part

W56HZV-22-R-0147

number.

C.6.4 The contractor shall provide commercially available and non-standard calibration services for the OPL's ATD DAS Systems and components, instrumentation, and support equipment.

C.6.5 If the qualification or calibration standard utilized changes, the contractor shall notify the COR of the new standard in writing no later than three (3) business after calibration standard change. If non-standard calibration services are required, the COR must approve.

C.6.6 The contractor shall identify the type of calibration performed for instrumentation. The contractor shall ensure the standards are traceable to the Syst\'e8me International dUnit\'e9s (International System of Units) verifiable with an organization such as the National Institute of Standards and Technology (NIST).

C.6.7 Repair Services for DAS Systems, Components, Instrumentation, Calibration and Support Equipment C.6.7.1 The contractor shall provide repair services for the OPL's DAS system, its instrumentation, and support equipment.

C.6.7.2 Upon COR approval, the contractor shall provide repair services to modified, or custom-manufactured ATDs, ATD components, instrumentation and calibration, test, or support equipment.

C.6.7.3 The contractor shall notify the COR within two (2) business days of receipt of any item shipped to the contractor for repair.

C.6.8. The contractor shall hold a Start of Work Meeting (SOWM) two days prior to the start of work on all tasks specified in the individual task order.

C.6.9 Deliverables C.6.9.1 The contractor shall compile the results of the component calibration into a Calibration Report for each of the components being calibrated IAW CDRL A001. The Calibration Report shall contain the test data from each of the tests that was conducted as well as the criteria for the test and the result of the test (Pass/Fail). Contractor format is acceptable for this deliverable.

*** END OF NARRATIVE C0001 ***

W56HZV-22-R-0147

DELIVERIES OR PERFORMANCE

Regulatory Cite Title Date

1 252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY MAR/2022

W56HZV-22-R-0147

CONTRACT ADMINISTRATION DATA

1 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS DEC/2018

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of

Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based

Training" link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting

Officer.

Combo

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the

Contracting Officer.

2in1

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some Combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in

W56HZV-22-R-0147

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC W56HZV

Issue By DoDAAC W56HZv

Admin DoDAAC W56HZV

Inspect By DoDAAC W56HZV

Ship To Code N/A

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) Contact COR

Service Acceptor (DoDAAC) Contact COR

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

N/A

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

W56HZV-22-R-0147

CONTRACT CLAUSES

1 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT/2018

2 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE AUG/2020

3 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS AND COMMERCIAL NOV/2021

52.219-9

SERVICES

SMALL BUSINESS SUBCONTRACTING PLAN

NOV/2021

5 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS NOV/2021

6 52.245-1 GOVERNMENT PROPERTY SEP/2021

7 52.245-9 USE AND CHARGES APR/2012

8 252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE DEC/1991

9 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS SEP/2011

10 252.204-7006 BILLING INSTRUCTIONS OCT/2005

11 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING DEC/2019

12 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT MAY/2016

13 252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS JAN/2021

252.204-7020

EQUIPMENT OR SERVICES

NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS

MAR/2022

15 252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS DEC/1991

16 252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES APR/2022

17 252.225-7056 PROHIBITION REGARDING BUSINESS OPERATION WITH THE MADURO REGIME MAY/2022

18 252.227-7015 TECHNICAL DATA--COMMERCIAL ITEMS FEB/2014

19 252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA APR/2022

20 252.232-7017 ACCELERATING PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS--PROHIBITION APR/2020

252.245-7001

ON FEES AND CONSIDERATION

TAGGING, LABELING, AND MARKING OF GOVERNMENT-FURNISHED PROPERTY

APR/2012

22 252.245-7002 REPORTING LOSS OF GOVERNMENT PROPERTY JAN/2021

23 252.245-7003 CONTRACTOR PROPERTY MANAGEMENT SYSTEM ADMINISTRATION APR/2012

24 252.246-7008 SOURCES OF ELECTRONIC PARTS MAY/2018

25 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY

2022)

MAY/2022

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and

Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV

2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021)(41

U.S.C. 4704 and 10 U.S.C. 2402).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section

1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

W56HZV-22-R-0147

_X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31

U.S.C. 6101 note).

(5) [Reserved].

(6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X_ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-

117, section 743 of Div. C).

_X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or

Proposed for Debarment (NOV 2021) (31 U.S.C. 6101 note).

_X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C.

2313).

(10) [Reserved]

(11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

(ii) Alternate I (MAR 2020) of 52.219-3.

(12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(13) [Reserved]

(14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

(ii) Alternate I (MAR 2020) of 52.219-6.

(iii) Alternate II (Nov 2011) of 52.219-6.

(15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020)(15 U.S.C. 644).

(ii) Alternate I (MAR 2020) of 52.219-7.

(iii) Alternate II (Mar 2004) of 52.219-7.

_X (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

_X (17)(i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) (15 U.S.C. 637(d)(4)).

(ii) Alternate I (NOV 2016) of 52.219-9.

(iii) Alternate II (NOV 2016) of 52.219-9.

(iv) Alternate III (JUN 2020) of 52.219-9.

(v) Alternate IV (SEP 2021) of 52.219-9.

(18)(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

(ii) Alternate I (MAR 2020) of 52.219-13.

(19) 52.219-14, Limitations on Subcontracting (SEP 2021)(15 U.S.C. 637(a)(14)).

(20) 52.219-16, Liquidated Damages--Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

(21) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021)(15 U.S.C. 657 f)

_X (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP 2021)(15 U.S.C. 632(a)(2)).

(ii) Alternate I (MAY 2020) of 52.219-28.

W56HZV-22-R-0147

(23) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (SEP 2021) (15 U.S.C. 637(m)).

(24) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB

Program (SEP 2021) (15 U.S.C. 637(m)).

(25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

(26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 637(a)(17)).

_X (27) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

(28) 52.222-19, Child LaborCooperation with Authorities and Remedies (Jan 2022) (E.O. 13126).

(29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X (30)(i) 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246).

(ii) Alternate I (Feb 1999) of 52.222-26.

_X (31)(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020)(38 U.S.C. 4212).

(ii) Alternate I (July 2014) of 52.222-35.

_X (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020)(29 U.S.C. 793).

(ii) Alternate I (July 2014) of 52.222-36.

(33) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Jun 2020)(38 U.S.C. 4212).

(34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

(ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

_X (36) 52.222-54, Employment Eligibility Verification (May 2022). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products and commercial services as prescribed in FAR 22.1803.)

(37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.

6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O.

13693).

(39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O.

13693).

(40)(i) 52.223-13, Acquisition of EPEAT[supreg]-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-13.

(41)(i) 52.223-14, Acquisition of EPEAT[supreg]-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun 2014) of 52.223-14.

(42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C. 8259b).

(43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun 2014) of 52.223-16.

W56HZV-22-R-0147

_X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

(45) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

(46) 52.223-21, Foams (June, 2016) (E.O. 13693).

(47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(ii) Alternate I (JAN 2017) of 52.224-3.

(48) 52.225-1, Buy American--Supplies (NOV 2021) (41 U.S.C. chapter 83).

(49)(i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (NOV 2021) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109- 169, 109-

283, 110-138, 112-41, 112-42, and 112-43.

(ii) Alternate I (JAN 2021) of 52.225-3.

(iii) Alternate II (JAN 2021) of 52.225-3.

(iv) Alternate III (JAN 2021) of 52.225-3.

(50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

(51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150).

(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007)(42 U.S.C. 5150).

(55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

(56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commericial Services (NOV 2021)(41 U.S.C.

4505, 10

U.S.C. 2307(f)).

_X (57) 52.232-30, Installment Payments for Commercial Products and Commericial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

(58) 52.232-33, Payment by Electronic Funds Transfer -- System for Award Management (Oct 2018)(31 U.S.C. 3332).

(59) 52.232-34, Payment by Electronic Funds Transfer -- Other Than System for Award Management (Jul 2013)(31 U.S.C.

3332).

(60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

X_ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

(62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017)(15 U.S.C. 637(d)(13)).

(63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021)(46 U.S.C. 55305 and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial products and commercial services:

_X (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

_X (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_X (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and

Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

W56HZV-22-R-0147

(4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

(6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--

Requirements (MAY 2014) (41 U.S.C. chapter 67).

_X (7) 52.222-55, Minimum Wages Under Executive Order 14026 (Jan 2022) (E.O. 14026).

_X (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR

2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractors directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the

Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section

743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Jun 2020)(38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020)(29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

W56HZV-22-R-0147

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii)(A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. 7104(g)).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. 7104(g)).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or

Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements

(MAY 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (May 2022).

(xvii) 52.222-55, Minimum Wages Under Executive Order 14026 (Jan 2022) (Executive Order 14026).

(xviii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xix)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (NOV 2021)(46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

26 52.216-18 ORDERING AUG/2020

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders shall be negotiatiated at the time of the task order.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) A delivery order or task order is considered "issued" when--

(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;

(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or

(3) If sent electronically, the Government either--

(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor;

or

(ii) Distributes the delivery order or task order via email to the Contractor's email address.

(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract. (End of clause)

W56HZV-22-R-0147

27 252.239-7016 TELECOMMUNICATIONS SECURITY EQUIPMENT, DEVICES, TECHNIQUES, AND DEC/1991

SERVICES

(a) Definitions. As used in this clause

(1) Securing means the application of Government-approved telecommunications security equipment, devices, techniques, or services to contractor telecommunications systems.

(2) Sensitive information means any information the loss, misuse, or modification of which, or unauthorized access to, could adversely affect the national interest or the conduct of Federal programs, or the privacy to which individuals are entitled under 5 U.S.C. 552a (the Privacy Act), but which has not been specifically authorized under criteria established by an Executive Order or Act of Congress to be kept secret in the interest of national defense or foreign policy.

(3) Telecommunications systems means voice, record, and data communications, including management information systems and local data networks that connect to external transmission media, when employed by Government agencies, contractors, and subcontractors to transmit

(i) Classified or sensitive information;

(ii) Matters involving intelligence activities, cryptologic activities related to national security, the command and control of military forces, or equipment that is an integral part of a weapon or weapons system; or

(iii) Matters critical to the direct fulfillment of military or intelligence missions.

(b) This solicitation/contract identifies classified or sensitive information that requires securing during telecommunications and requires the Contractor to secure telecommunications systems. The Contractor agrees to secure information and systems at the following location: -1-

(c) To provide the security, the Contractor shall use Government-approved telecommunications equipment, devices, techniques, or services. A list of the approved equipment, etc. may be obtained from -2-. Equipment, devices, techniques, or services used by the Contractor must be compatible or interoperable with -3-.

(d) Except as may be provided elsewhere in this contract, the Contractor shall furnish all telecommunications security equipment, devices, techniques, or services necessary to perform this contract. The Contractor must meet ownership eligibility conditions for communications security equipment designated as controlled cryptographic items.

(e) The Contractor agrees to include this clause, including this paragraph (e), in all subcontracts which require securing telecommunications.

28 52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT NOV/2021

"Agent" means any individual, including a director, an officer, an employee, or an independent Contractor, authorized to act on behalf of the organization.

"Full cooperation"--

(1) Means disclosure to the Government of the information sufficient for law enforcement to identify the nature and extent of the offense and the individuals responsible for the conduct. It includes providing timely and complete response to

Government auditors and investigators' request for documents and access to employees with information;

(2) Does not foreclose any Contractor rights arising in law, the FAR, or the terms of the contract. It does not require--

(i) A Contractor to waive its attorney-client privilege or the protections afforded by the attorney work product doctrine; or

(ii) Any officer, director, owner, or employee of the Contractor, including a sole proprietor, to waive his or her attorney client privilege or Fifth Amendment rights; and

(3) Does not restrict a Contractor from--

W56HZV-22-R-0147

(i) Conducting an internal investigation; or

(ii) Defending a proceeding or dispute arising under the contract or related to a potential or disclosed violation.

"Principal" means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).

"Subcontract" means any contract entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract.

"Subcontractor" means any supplier, distributor, vendor, or firm that furnished supplies or services to or for a prime contractor or another subcontractor.

"United States," means the 50 States, the District of Columbia, and outlying areas.

(b) Code of business ethics and conduct.

(1) Within 30 days after contract award, unless the Contracting Officer establishes a longer time period, the Contractor shall--

(i) Have a written code of business ethics and conduct; and

(ii) Make a copy of the code available to each employee engaged in performance of the contract.

(2) The Contractor shall--

(i) Exercise due diligence to prevent and detect criminal conduct; and

(ii) Otherwise promote an organizational culture that encourages ethical conduct and a commitment to compliance with the law. (3)(i) The Contractor shall timely disclose, in writing, to the agency Office of the Inspector General (OIG), with a copy to the

Contracting Officer, whenever, in connection with the award, performance, or closeout of this contract or any subcontract thereunder, the Contractor has credible evidence that a principal, employee, agent, or subcontractor of the Contractor has committed--

(A) A violation of Federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in

Title 18 of the United States Code; or

(B) A violation of the civil False Claims Act (31 U.S.C. 3729-3733).

(ii) The Government, to the extent permitted by law and regulation, will safeguard and treat information obtained pursuant to the Contractors disclosure as confidential where the information has been marked confidential or proprietary by the company. To the extent permitted by law and regulation, such information will not be released by the Government to the public pursuant to a Freedom of Information Act request, 5 U.S.C. Section 552, without prior notification to the Contractor.

The Government may transfer documents provided by the Contractor to any department or agency within the Executive Branch if the information relates to matters within the organizations jurisdiction.

(iii) If the violation relates to an order against a Governmentwide acquisition contract, a multi-agency contract, a multiple-award schedule contract such as the Federal Supply Schedule, or any other procurement instrument intended for use by multiple agencies, the Contractor shall notify the OIG of the ordering agency and the IG of the agency responsible for the basic contract.

(c) Business ethics awareness and compliance program and internal control system. This paragraph (c) does not apply if the Contractor has represented itself as a small business concern pursuant to the award of this contract or if this contract is for the acquisition of a commercial product or commercial service as defined at FAR 2.101. The Contractor shall establish the following within 90 days after contract award, unless the Contracting Officer establishes a longer time period:

(1) An ongoing business ethics awareness and compliance program.

(i) This program shall include reasonable steps to communicate periodically and in a practical manner the Contractors standards and…