2053345C.pdf

SECTION A-A

SCALE 1 / 4

PART - 2

SCALE 1 / 8

PART - 3

SCALE 1 / 8

PART - 1

SCALE 1 / 8

PART - 4

SCALE 1 / 8

A A

B B

C C

D D

E E

F F

SIZE REVDWG. NO.CAGE CODE

SCALE UNIT WT. SHEET 1 OF 1

DRAWN BY

DRAWING APPROVAL

ENGINEERCHECKER

DESIGN APPROVAL

DATE

J Armstrong

R Sissons 6/8/1995

R Sissons

F 2053345

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

SAFETY

IND. HYG.

TOLERANCES ON

FIRE CHIEF

2 PLACE

+/- .01

FRACTIONS

+/- 1/16

3 PLACE

+/- .005

ANGLES

+/- 1

NOTED

C

CONTRACT NUMBER

CONTRACTOR

PRODUCTION ENGINEERING DIVISION, DIRECTORATE OF OPERATIONS

TEXARKANA, TEXAS 75507-5000

RED RIVER ARMY DEPOT

67010

48" x 40" BOX PALLET

(ADAPTS TO FLOOR JACK)

A A

GRADE C-D - SEE NOTE #83/4" PLYWOOD - 48" X 4018

STEEL NAILS (PACK OF 100)8d COMMON NAIL W/ RING SHANK27

GALVINIZED STEEL/ INDUSTRIAL CARBIDE

CORP. OR EQUAL. WWW.ICSTC.COM

STEEL STRAP 1 1/4" X 0.030 GA. - 182"L

(OPTIONAL PERFORATED STRAP)

STEEL NAILS (PACK OF 100)4d COMMON NAIL W/RING SHANK15

#2 SOUTHERN PINE - SEE NOTE #8RUNNER - 4 X 6" 34

#2 SOUTHERN PINE - SEE NOTE #8BOX SIDE SHORT 2 X 12" 23

TREATED, GRADE C-D - SEE NOTE #83/4" PLYWOOD12

#2 SOUTHERN PINE - SEE NOTE #8BOX SIDE LONG 2 X 12"21

Parts List

MATERIAL / VENDORDESCRIPTIONQTYITEM18 3/4

NOTES:

1) DRILL STARTER HOLES FOR 8D NAILS TO PREVENT SPLITTING OF WOOD..

2) WHEN DRIVING NAILS INTO WOOD DURING ASSEMBLY NAIL HEAD SHOULD JUST BE BELOW

SURFACE OF WOOD WHERE POSSIBLE.

3) ASSEMBLE BOTTOM PLATE (PART 2) TO RUNNERS (PART 4) USING 8d NAILS (SIX PER RUNNER)

4) ASSEMBLE BOX SIDES (PART 1 & 3) USING 8d NAILS IN CONFIGURATION SHOWN.

USE FOUR SCREWS PER ATTACHMENT.

5) ASSEMBLE TOP PLATE (PART 8) TO UNDERSIDE OF BOX SIDES USING 8D NAILS (SIX PER RUNNER)

6) VERIFY SIDES ARE SQUARE.

7) ASSEMBLE TOP PLATE (NOW WITH BOX SIDES ATTACHED) TO RUNNERS USING 8D NAILS. INSTALL THEN ATTACH AND LAP CONTINUOUS METAL STRAPS USING 4d NAILS.

8) ALL LUMBER MUST CONFORM TO DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING: FOR SHIPPING TO EUROPEAN COMMUNITIES, WOOD PRODUCTS MUST BE #2 GRADE OR BETTER, KILN DRIED, HEAT TREATED, PALLETS MUST BE STAMPED WITH AMERICAN LUMBER STANDARDS COMMITTEE ACCREDITED

STAMP (US-000, HT).

9) ENGRAVE, STAMP, OR STENCIL RRAD DWG NO. AND TEXT TO ASSEMBLY ON TWO OPPOSITE SIDES.

(48)

(18 1/4)

(7)

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

A CHANGED NOTE#1 ADDED #8 AND ADJUSTED BOM 2/16/2010 S EATON

B ADD CUTOUTS TO BOTTOM PLATE (2), CHANGED

TO PRESSURE TREATED

2/1/2011 RCS

C INCREASED SIZE OF PART 4, ADDED NOTE 9 3/18/2015 RCS

72X 102X 142X

64X

R1/28X

38 1/2

(11 1/4)

(1 1/2)

(11 1/4)

(1 1/2)46 1/2

40 (3 1/2)

(5 1/2)

(18 3/4)

NOTE 9

C

C robert.sissons Robert Sissons john.t.armstrong1 John Armstrong robert.sissons Robert Sissons gregory.c.johnson Johnson