Attachment_0001_-_SOW.docx

Statement of Work Date: 6 December 2018 Revision: 0 Custom Built 8000 lb. Forklift

Capacity – 8000lbs Lift Height – 159” w/77” Free Lift Height – Closed Mast = 112” Height - Raised Mast/Total Lift = 192” Useful Platform Length 41 ¼” Rack to Rack 112 3/4 Fork to Rear Dimension – 43 ¼ Front Face to Rear Cab – 85 1/4 Product to Lift front and back 13 ¾ Fork Carriage Width 53 ¼ Overall Width (Wheels In) 89 1/2" Side to side dimensions-see drawing Overall Width (Wheels Turned out) – 102” Special platform length of 41 ¼”

Ground Clearance Under Mast – 18 1/2 Cab Height (W/O Working Lights) – 93 3/4 Approach Angle – 45 degrees Ramp Angle – 17 degrees Departure Angle – 45 degrees Forward Tilt – 3 degrees Backward Tilt – 5 degrees Maximum Ground Speed – 10km/h gradability – 10% Battery Capacity – 80V/620Ah Fork Section – 50mm x 150mm x 1200mm 2 EA Electric AC Tractor Motors – 80V/5kw AC Electric Pump Motor - 80V/19kw Mulit Direction Operation Load Sensing Steering Curtis AC Software 4 Lever Positioning of Wheels 2 Wheel Drive

Flashing Beacon 4 LED Work Lights (2 Forward, 2 Side, 2 Rear) Wide Door -Wide cabin – Rubber Mounted Windshield Wipers – Front Glass Backup Alarm Rubber Cushion Front Tires (16” x 11”) Solid Pneumatic (SE) Rear Tires (27” x 10”) Deep Suspension Seat 80V 620Ah Battery Compartment Hydraulic Fork Positioner (Close with 18” Maximum Open Width 52”) Telescopic Forks (7” x 2” x 42”) extendable to 51.5” Rubber Mats on Platform Fully Enclosed Cab w/ Heat and A/C 195” Duplex Mast with 77” Free Lift (Closed Height 112”) EE Rated Warranty 1 Year, 1500 hours whichever comes first Full Parts and Labor Warranty and 2500 hours or 1 Additional Year Manual Pallet Jack for secondary battery removal Color- Hi Vis Yellow and Grey

6 D hooks to be installed Safety Eyelets – Front & Rear Platform D Hook Design - Welded Battery Jumper if required Custom (6)Battery: 40-El00-13 w/Watering System Custom (6)High Frequency Chargers EI3-IN-5YE Scan Tool for Diagnosis Owners, Service, Parts Manuals to include electrical schematics Delivered to MCAAP

Additional Info

This is the measurement of how far the wheels go out when turned to the 90* turn, measured form the outside dimensions of the cabin width 85 1/4"

4. Multi Direction Operation - Are you meaning that the forklift be "Omni" directional? Yes that is correct

1/4"X ??

capacity should be a minimum of 8Klbs

7. Ground Clearance under mast - Please Clarity the overall ground clearance to the bottom of the fork to allow for transitions to trailers This height should cover the gradiability.

8. Custom (6) Battery: 40-EI00-13 - Are you asking for a quantity of six (6) ? YES

9. Custom (6) High Frequency Chargers - Asking for a Quantity of six

(6) ? YES

10. On these two items what are you asking to be custom about them? As the set up will pertain to the voltage of the battery and the truck they are used with. Ie. 80V 620Ah battery is what you are requesting and or equal? and or equal is acceptable as long as we have a charger and possibly a stand to store them, for charging.

1. Capacity - 8000lbs Is the capacity required at max. lifting height with extended telescopic forks?

With a load center of 20" and a lift height of 10.5 Ft the capacity should be a minimum of 8K

2. Product to Lift front and back 13 ¾ where exactly is this measured?

This is the measurement of how far the wheels go out when turned to the 90* turn, measured form the outside dimensions of the cabin width 85 1/4"

3. Special platform length of 41 ¼" Where does this requirement come from and does this call for a customized chassis?

This comes from the size of the containers to be moved and door sizes.

Would a wider carriage that allows position the forks left and right of the chassis fulfill this requirement as well?

I am not sure on this. I think that has something to do with actual hauling the fork from location to location.

4. Fork Section - 50mm x 150mm x 1200mm /// Telescopic Forks (7" x 2" x 42") extendable to 51.5" Different section are specified - which specification applies?

Telescopic Forks (7" x 2" x 42") extendable to 51.5" is the correct dimensions

5. 4 Lever Positioning of Wheels Do not understand this requirement. Our wheel positioning is done through a small wheel and drive by wire incl. a steering controller.

This requirements requires all four wheels to move to allow maximum maneuverability

6. 6 D hooks to be installed more detail required (pictures would be great) to see if this option can be provided on our product The hooks will be on the platform sides and 2 on the carriage.

7. Safety Eyelets - Front & Rear Platform D Hook Design - Welded more detail required (pictures would be great) to see if this option can be provided on our product no pictures available this is part of the 6 D hook requirement.