Attachment_0001_Loading_Ramps_Purchase_Description_v2.docx

Purchase Description for Heavy Equipment Portable Loading Ramps 8 June 2018

Requirement: Four portable heavy equipment loading ramps. The ramps MUST meet the following specifications:

· Capacity 50,000 lbs. or greater

· Non-slip travel surface

· Loading surface minimum width 102 inches

· Minimum 6 inch safety curbs

· Must include 10 ft. leveling off area

· Minimum 30 ft. incline

· Height range adjustable between 36 to 54 inches

· Include forklift side pockets to allow for quick and easy loading

· Pneumatic tires

· Towable

· Include safety chains

· Hinged leveling lip plate to allow for slight height fluctuations

· Hinged tail plate chamfered

· Coated with a durable corrosion resistant material

The requirement is for two each ramps meeting the above specifications delivered to Joint Base McGuire–Dix–Lakehurst (JBMDL), U.S. Army Sustainment Command, Logistics Readiness Center, Fort Dix, NJ 08640 and 2 each Eglin Air Force Base (EAFB), U.S. Army Sustainment Command, Logistics Readiness Center, Fort Walton Beach, FL 32548. The ramps are required to load and unload unit equipment in support of Army Projection Platforms and Mobilization Force Generation Installations.

State the overall weight of the ramp you would be providing.