Attachment_0001_-_Ballast_Regulator_Tech_Specs.docx

TECHNICAL SPECIFICATION:

Ballast Regulator Minimum standards {Include all required Safety devices}

Engine

1. Tier III Diesel – Six-cylinder, minimum 185HP

1. Engine protection system - Protection Systems to idle or shut down diesel engines before minor problems cause major damage. Oil pressure / Coolant / transmission oil temperature, etc.

1. Fuel tank capacity [120 gallons minimum]

Transmission and Axles

1. Standard shift, Heavy Duty [minimum four speed] – A Shift-on-the fly set up is acceptable. A Standard Automatic 4 speed Power assisted shifting transmission is also acceptable.

1. Industrial type Dual-axles (5” Standard Axles), chain-drive (or drive shaft), hydraulic motor driven

1. 4-Wheel drive

1. A steering axle is not required

1. Axles and wheels need to be electrically insulated

Electrical System

1. Weather proof wiring harness

1. Electrical system 24 VDC (dual 12V DC batteries), 1150 cold-cranking amps [Minimum]

Body and Cab

1. Steps with anti slip protection

1. Rear view mirrors on each side

1. Tool Box-Lockable

1. Controlled heater and Air Conditioner

1. Fixed driver’s seat (Air Ride/Suspension Seat) – A fixed seat that pivots and is height adjustable is acceptable

1. Wipers and washers on front,

1. Tinted windows

1. Lockable doors (key)

1. West Coast Type mirrors/Inside rear view mirror

1. Sound insulated

1. 24 V outlet

1. Color Specifications – Equipment should be standard safety Yellow

Instrumentation [Minimum]

- Actual gear - Engine rpm - Travelling speed

- Fuel bar

- Hydraulic oil temperature

- Engine oil pressure

- Engine coolant temperature -Hour meter -Charging -High beam (Railroad Directional Lighting is also acceptable) -Parking brake -Low fuel level -Low brake pressure -Safety system disconnected (indicator light that goes off when the system is not fully connected) -High engine coolant temperature -Low engine coolant level -Hydraulic oil temperature -Low engine oil pressure -Transmission oil pressure -Indication locked twist locks, indication alignment, & indication open twist locks - The equipment has arms or (WINGS) that move up to a locked position, an indicator that shows they are in the locked position is required

Wheels

1. Tires : [standard] (24” steel flanged wheels are also acceptable)

1. Brakes: Air Brakes

Lifting boom

1. Standard turntable

Hydraulics

1. Return filters hydraulic. Oil (10 micron)

1. Pressure filter brakes (10 micron)

1. Load sensing pumps

1. Visual level glass hydraulic tank and brake tank

1. Environmental air filter hydraulic tank

1. Hydraulic fluid tank capacity [150 gallons minimum]

Signs and documentation

1. Machine data plate chassis load chart – standard equipment data plate

1. Warning stickers

1. Information stickers

1. Fuse diagram

1. Instruction manual

1. Maintenance manual

1. Spare parts catalogue

Compliances:

OSHA Standard 1910 Warranty point of contact at location

Ship to Address:

410 Norman Avenue Concord, CA 94520