17-T-0185-0001_Conveyor-Batch_System_Solicitation_Amendment.pdf

CONTRACTING OFFICE/KWH

KENT W. HACKETT

918-420-6177/MCALESTER CONTRACTING

1 C TREE ROAD

MCALESTER OK 74501-9002

W44W9M7080004L

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to delete the manufacturers part number referenced w ithin the requirement.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 28-Mar-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W44W9M-17-T-0185

X 9B. DATED (SEE ITEM 11)

28-Mar-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Mar-2017

CODE

CONTRACTING OFFICE

MCALESTER CONTRACTING OFFICE

1 C TREE ROAD

MCALESTER OK 74501-9002

W44W9M 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W44W9M

FACILITY CODECODE

EMAIL:TEL:

W44W9M-17-T-0185

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

CONVEYOR / BATCHING SYSTEM, FLEXICON CORPORATION PN# 2016F2501-ALP9, BRAND NAME,

NO SUBSTITUTE, PER THE ATTACHED PURCHASE DESCRIPTION.

To:

CONVEYOR / BATCHING SYSTEM, FLEXICON CORPORATION, BRAND NAME, NO SUBSTITUTE, PER

THE ATTACHED PURCHASE DESCRIPTION..

The following have been modified:

PURCHASE DESCRIPTION

CONVEYING AND BATCHING SYSTEM

FLEXICON CORPORATION

Materials of Construction:

All product contact surfaces will be carbon steel and/or other materials such as rubber, plastic, etc., unless otherwise specified. All product contact components shall be welded exclusively on the exterior and deburred. Exterior, non-material contact areas shall be carbon steel with standard enamel primer and paint.

MATERIAL: CARNUBA WAX FLAKE (Weight of product to be moved – 52 LBS per CFT)

MATERIAL THROUGHPUT. 58 CUBIC FEET/HOR

Model SPL-X 1.1 -Unground Carnuba Wax Transfer System -Includes Dust hood, 36" floor hopper with bag tray, screen, vibrator mounting pad, chopper style agitator and level sensor -Includes Model 1600 Flexible Screw conveyor with 5 HP drive, discharge transition and Flexible Spouting

MODEL SPL-X 1.2

-Carnuba Wax Transfer/ Batching System -Includes 24" cover with 18" diameter unflanged inlet port -Includes 24" square hopper -With mounting pad for vibrator and pneumatic vibrator with 24 VDC solenoid -With high & low level sensors -Includes 20' long Model 1450 conveyor with 5 HP drive, and discharge transition -Includes Single deck high efficiency 40" Separator with 1/2 HP vibrator motor -Includes 18" diameter weigh hopper with cover, mounting pad for pneumatic vibrator, (3) load cells with discharge flanged to suit 8" slide valve

W44W9M-17-T-0185

-Includes 8" slide valve with 24 VDC solenoid and limit switches, 90° stub outlet flanged to suit magnet -With Eriez Rare earth magnetgrate in housing, with discharge transition to 8" OD and (1) ft. of 8" flex spouting -Includes Operator Access Platform with access stairs and guard rail, designed to support Conveyor drive, Separator, Weigh hopper and magnet

SPL-X1.3

-Carnuba Wax Surge hopper and push conveyor, 8 CFT Measured Conveyor, transfer rate of 57CFT/Hr.

-Includes Model 1450 Bev-Con "Push" conveyor x 5' long with 3 HP inline drive

ELECTRICAL REQUIREMENTS: 208/3/60

ELECTRICAL ENCLOSURES: NEMA 4

MOTOR ENCLOSURES: TEFC

(End of Summary of Changes)