RMAC18-7_-_Salient_Characteristics_(20171129).pdf

Stratasys, Inc. Objet350 Connex3™ 3D Printer Salient Characteristics

Introduction: The S3I Directorate of AMRDEC has a requirement for the purchase of one (1) Stratasys, Inc. Objet350 Connex3™ 3D printer and associated support equipment, or their functional equivalent, to be used to support fabrication of custom test structures by the Protection Technologies Laboratory.

The following equipment or its functional equivalent is required:

Part # Description Connex350 C3 3D Printer

OBJ-17000 Stratasys Objet350 Connex3™ 3D printer system with 13.4”x13.4”x7.9” printer area, with Optimax and Object Studio, 12 month warranty, and Printer Start Up Kit to include:

OBJ-03263 PACK OF 1 FLX980, TANGOBLACKPLUS, 1.44KG

OBJ-03268 PACK OF 1 OBJET RGD515, 1.44KG

OBJ-03295 PACK OF 1 OBJET RGD531 1.44KG

Connex350 C3 Support Equipment OBJ-01331 Soluble Support Removal System – DT3, 120V, Internal working envelope 11”H x 12.25”W x10”D OBJ-03006 WaterJet Cleaning System – Large Format, 110V, to include 12 month on parts (excluding pump), 6 months on pump CMP-00019 Host computer, Dell T3500, 16GB RAM, 6 Core Xeon, 3.46 GHz CMP-00104 UPS, Eaton PW9130L2000T-XL (1800W, 120V)

Other

OBJ-03200 PACK OF 1, SUP705, RESIN SUPPORT, 3.6KG, QTY 2

OBJ-00325 PACK OF 1 RGD843, VERO CYAN, 3.6 KG

OBJ-03299 PACK OF 1 OBJET RGD851, VERO MAGENTA, 3.6KG

OBJ-03302 PACK OF 1 Objet RGD836, Vero Yellow 3.6Kg OBJ-17013 Onsite installation and training, Program OBJET350

CONNEX3/2/1

The following salient characteristics of the Stratasys system are required in whatever is procured:

Stratasys Objet350 Connex3™ 3D Printer

• Capable of printing blended materials, to include at a minimum rigid opaque, rubber-like, and high temperature

• Use of inkjet technology for printing (as opposed to filament-based)*

• Maximum materials per part: at least 10

• Use of water soluble support materials**

• Maximum build size: at least 12”W x 12”D x 5”H

• Resolution: 600 dpi in X, 600 dpi in Y, 1600 dpi in Z*

• Accuracy: Up to 200 microns for full model size (for rigid materials only, depending on geometry, build parameters, and model orientation)

• Build modes:

o High quality: at least 16 µm resolution o High speed: at least 30 µm resolution

• Operable on 110-240VAC, 50/60Hz, 1.5KW Single Phase

*Required for smooth surface finishes without the need for post-processing.

**Because of the nature of the testing to be done, any items fabricated with this printer must have minimal out-gassing and retain as little manufacturing materials (e.g. residual support material) as possible. Hence, water-soluble support materials are to be preferred to wax-based materials.

DT3 Support Cleaning System

• Compatible with Stratasys SUP705 support material

• Compatible with Stratasys Objet350 Connex3™ 3D Printer

• Tank size: at least 10”D x 10”W x 10”H

• Active cooling

• Semi-automatic operation; ability to control cleaning duration

• Operable on 110V AC, 60Hz

WaterJet Support Cleaning System

• Minimum 7 kg water pressure pump

• Chamber size: at least 14”W x 14”D x 7”H

• High-pressure jet and medium pressure spray available

• Water intake: standard water tap with hose connection

• Operable on 110V AC, 60 Hz, 15A, Single Phase