A9_-_Salient_Characteristics_Holtec_9-14-17.pdf

Salient Characteristics for

Brand name or Equal to Holtec Selecut V- Series Waste Conveyor System To Include Installation

Cutting System Speed

Cutting system with top-bottom speed of fifty-five (55) seconds Unit-cut (load/cut/position/unload) approximately every 3.0 minutes, giving it the ability to make approximately 150 unit-cuts per 8 hour shift and with a precision of +/-1mm (~.040")

Electronic Operation Console

Complete Housing Enclosure around cutting system Analog Cut Counting Meter, permanent and shift reset-able Electronic Trigger Switch Controls Electronic Valves for Hydraulic System Depth adjustable cutting Electronic Length Measuring System Demag® electric drive motor for positioning Laser-light Guide for cutting Complete control center with non-slip operator’s platform and stairs

6m (~20') Fixed Frame Assembly and INLINE POWER SQUEEZE PACKAGE ALIGNMENT ASSEMBLY to include

Vertical Cutting (Proportional Swivel) Base Unit Solid Main Frame for Vertical Cutting Hydraulic Cylinder, 1300mm (~51") total vertical/proportional stroke with Proportional Depth Swivel 15.0Kw (~18hp) Electric Motor with Integrated Starters Input Voltage: 460v, 60Hz, 3P 3.5kw (~4hp) Hydraulic Motor with Integrated Starters, 100% ED, IP54 Rexroth hydraulic valves for electronic control center with adjustable depth of cut 14 liter chain lubrication oil tank with automatic chain lubrication using an electric oiler Quick chain tensioning and release device Armored Guide Bar #3321, 160cm/63" effective cutting length Hard-Chromed Chain #8719, 160cm/63" effective cutting length Operations Control Center with Shielding Dust Retention and Housing Enclosure around Cutting System Laser Guide for Cutting Blower Hookup

Power Squeeze System

Designed to square up and align units with or without battens attached and ranging from 8’ to 20’ in length

Main Frame Assembly

Fixed Frame Assembly to accommodate maximum 6m (20') Packages, Operator's platform frame, stairs, supports, bases, etc., precision of +/-1mm (.040"), ELECTRONIC LENGTH MEASURING SYSTEM

Microprocessor controlled accuracy to +/- 1mm (.040") LED readout on control panel Reset switches automatically adjust for saw kerf in indicated length

ELECTRONIC POSITIONING AND TRAVEL

Movement of Operator's Platform Electric Drive Motor Four Speed Bidirectional Variable Controls Automatic Brake and Lockout

INLINE POWER PACKAGE-SQUEEZE ALIGNMENT ASSEMBLY

The Package Alignment station is constructed with a lateral frame and incorporates a 30l/min 4.0kw (5.5hp) hydraulic system to control the horizontal movement and pushing power of the primary alignment wall as well as the horizontal movement of the secondary alignment wall.

The range of movement is from 2.4m (8') to 6m (20') with an electronic locking mechanism.

The primary alignment wall also incorporates a "rapid return" hydraulic cylinder with an approximate range of 300mm (12") Resistance sensing valve The controls (electric/hydraulic) for the package aligning station are incorporated into the main operator's control stand.

WASTE CONVEYOR, DISCHARGE TO SIDE OF SYSTEM

700mm (~27.5") conveying width, 7.0m (~23') horizontal conveyance, Transfer Curve, 3.0m (~10') ascending conveyance, funneling to trap debris, Includes all materials, tools, drives & controls

ON-SITE INSTALLATION & TRAINING

Upon award of the contract, the vendor will provide the required electrical supply requirements, and necessary tools needed for on-site installation.

The vendor will provide an operator’s manual, parts manual and service manual.

The vendor will provide Operational training to explain and demonstrate all operating features of the equipment. The customer's personnel must demonstrate to the vendor that the machine operating features have been understood.

The vendor will provide Maintenance training to explain and demonstrate how to inspect, clean and maintain all of the operating features of the equipment. The vendor will explain the use of the spare parts manual and how to order parts. The vendor will familiarize personnel with the maintenance items identified in the operator's manual. The customer's personnel must demonstrate to the vendor that the machine maintenance requirements have been understood.

The vendor shall explain, identify and demonstrate the safety features of the equipment. The customer's personnel shall acknowledge their familiarity with the safety features of the equipment.

The vendor will explain to the customer's personnel any warranty information.