Attachment 0012 DD254.pdf

Please wait...

If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.

You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.

For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.

Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

OPSEC Plan Format Attachment Page 1 of 4

JPEO Armaments & Ammunition Attachment (JPEO AA-22-001-S)

CONTRACT NUMBER: TBD

Attachment DD254, Block 13 Continuation Sheet:

OPSEC Plan Format

I. COVER PAGE

The cover page for an OPSEC Plan shall clearly present, at a minimum, the following information:

1. Title of the Acquisition Program

2. Title of the Document (i.e. “Operations Security Plan”)

3. Reference to the government contract number

4. Date of latest revision

5. Name, signature and title of the preparer of the OPSEC Plan

6. Name, signature and title of the approver of the OPSEC Plan

7. Reference for whom the document was prepared (Contracting activity)

8. Reference by whom the document was prepared (Corporation)

9. All appropriate distribution or classification statements

II. TABLE OF CONTENTS PAGE

The Table of Contents for an OPSEC Plan shall outline each section contained in the OPSEC Plan.

III. PREFACE PAGE

The purpose of the Preface is to provide a brief, unclassified, overview of the program and the need for OPSEC measures. The specific objectives of the contracted effort shall be introduced with reference to all strategic participants and partnerships required to make the program a success. The anticipated development of any innovative concepts or technologies shall also be introduced in the Preface.

The Preface shall reference all links between the OPSEC Plan and any corporate OPSEC Program(s).

The Preface may conclude by referencing requirement documents such as the contract number, Contract Security Classification Specification (DD254), Contract Data Requirements List (DD1423) and any other pertinent guidance provided by the contracting activity. It shall also provide an OPSEC point of contact, with contact information, for additional guidance or assistance such as the OPSEC program manager or contractor program manager.

IV. OPSEC PLAN INTRODUCTION

Purpose and Scope: The purpose of the OPSEC Plan shall be effectively communicated in this section and include a description of the scope of the OPSEC Plan (unique physical locations, subcontractors, suppliers, period of performance, etc.).

Authorities: The requirement to protect critical information shall be documented within this section.

Documenting the requirement can be achieved by referencing the Corporate OPSEC Program (Policy) and Plan, DODM 5205.-2M, specific contract documents including the DD254 for contracts involving classified data, or other contracting activity specific guidance.

OPSEC Plan Format Attachment Page 2 of 4

OPSEC Plan Major Activity Timeline: This section shall include a list of all major OPSEC Plan activities such as quarterly OPSEC Working Group Meetings, Annual Assessments, scheduled OPSEC awareness training, Sub-contractor OPSEC Assessments and Surveys, Threat and Vulnerability Reviews, etc. This section shall also include scheduled OPSEC Plan reviews.

Responsibilities: The OPSEC Plan shall identify who is responsible for the major activities described in the Plan. For example (not intended as an inclusive The OPSEC Officer shall be identified by name and include a list of duties that may include:

1. Coordinate all OPSEC policy responsibilities/ procedures within the program

2. Revise the Program OPSEC Plan as necessary

3. Convene and coordinate the annual Program OPSEC Assessment

4. Disseminate updated threat information to program personnel

5. Assist in the review of contract requirements for OPSEC considerations

6. Conduct OPSEC Training IAW AR 530-1, Chapter 4.

7. Achieve OPSEC Level II certification

8. Develop/Disseminate Program Critical Information List (CIL)

9. Promote OPSEC awareness within the program

A short description of the expectations and responsibilities of all program personnel (including subcontractors and suppliers) shall be provided and may typically include:

1. Remain compliant with all applicable OPSEC Plans

2. Maintain an awareness of all applicable CIL

3. Attend all OPSEC program briefings

4. Timely reporting of any OPSEC concerns to the Contractor Program Manager and/or the

Program OPSEC Manager

5. Generation of OPSEC Plans (sub-contractors or suppliers only)

Organizational OPSEC Communications and Interfaces: A description as to how the OPSEC Plan will be communicated to all personnel supporting the program (hardcopy, via a webpage, briefings, etc.)

Marking, Handling and Distribution of Documents: This section shall provide a description of marking, handling, storage, access and transmission authorizations and procedures for any critical information provided to, or generated by, the contractor. Reference to the program classification guide, Freedom of Information Act and any additional guidance provided by the contracting activity may be cited as applicable.

V. CRITICAL INFORMATION

General: Critical information shall be identified within this section of the plan and a comprehensive program Critical Information List (CIL) shall be included.

Critical Information List: Guidance on the creation of a CIL is contained within “Applying OPSEC to Government Acquisitions and Contracts,” available at https://www.iad.gov/ioss/, AR 530-1, DODM 5205.02M, or may be provided by the contracting activity. Ideally the CIL shall remain unclassified to facilitate wide internal distribution, but may provide reference to classified information as applicable

VI. THREAT

General Threat: This section shall identify and demonstrate an understanding of the overall threat to https://www.iad.gov/ioss/

OPSEC Plan Format Attachment Page 3 of 4 program critical information throughout the anticipated duration of the contract/program. The section shall conclude with a brief description of all identified intelligence/information collection methods that may be expected to be used by an adversary or competitor to acquire Critical Information. Note:

For current information see, “Targeting US Technologies: A Trend Analysis of Cleared Industry Reporting.” You can also contact your local FBI field office for relevant information.

Program Detailed Threat: This section shall be similar to section above referencing any known direct threats to acquisition specific elements of critical information within the program/contract. As complete a description of each threat as possible shall be provided while maintaining the overall plan classification at the unclassified level.

Threat Analysis: Each threat identified in above sections shall be analyzed to determine the level of threat to the corresponding critical information. The results of this analysis shall be presented in this section. A description of the specific threat analysis method used by the contractor to quantify each threat shall be included in this section. Note: For additional guidance and a sample threat analysis methodology see, “Applying OPSEC to Government Acquisitions and Contracts” at https://www.iad.gov/ioss/ and DODM 5205.02.

VII. VULNERABILITIES

General: The Vulnerability section of the OPSEC Plan shall describe the analysis of activities (indicators) that point to OPSEC vulnerabilities an adversary can exploit to acquire critical information. This section shall contain a list of all identified OPSEC vulnerabilities.

List of OPSEC Vulnerabilities: All vulnerabilities shall be described in sufficient detail as to communicate to the contracting activity the extent of the vulnerability. The Vulnerability List shall remain unclassified. Note: A list of typical OPSEC vulnerabilities which may require OPSEC measures may be found within “Applying OPSEC to Government Acquisitions and Contracts”, available at https://www.iad.gov/ioss/. These sample vulnerabilities are not all inclusive and the submitted vulnerability list shall be tailored to the specific acquisition or contract.

Vulnerability Analysis: Once potential program vulnerabilities have been identified, the magnitude of each vulnerability shall be determined using a consistent methodology identified and documented in this section of the OPSEC Plan. The results of this analysis shall also be described in this section.

Note: For additional guidance and a sample vulnerability methodology see, “Applying OPSEC to Government Acquisitions and Contracts” at https://www.iad.gov/ioss/, AR 530-1 and DODM 5205.0- 2M.

VIII. RISK ASSESSMENT

General: The OPSEC risk of a program represents the probability of compromise of critical information and the impact to the program/contract taking into account the threat and vulnerabilities.

The acceptable level of OPSEC risk (as determined by senior leadership, or the contracting activity) shall be described in this section in terms consistent with the selected OPSEC methodology.

Risk Assessment: The specific OPSEC risk shall be described in terms consistent with the OPSEC methodology selected for determining OPSEC threat and vulnerability. The method, and the results of the assessment, shall be presented in this section. The conclusion of the risk assessment shall result in an ordinal ranking of OPSEC risk (highest to lowest). Note: Additional guidance and a sample risk methodology are available in “Applying OPSEC to Government Acquisitions and Contracts” at https://www.iad.gov/ioss/, AR 530-1 and DODM 5205.0-2M.

http://www.dss.mil/documents/ci/2017_CI_Trends_Report.pdf http://www.dss.mil/documents/ci/2017_CI_Trends_Report.pdf https://www.iad.gov/ioss/ https://www.iad.gov/ioss/

OPSEC Plan Format Attachment Page 4 of 4

IX. OPSEC MEASURES

General: This section of the OPSEC Plan shall identify specific OPSEC Measures proposed for mitigating OPSEC risk to acceptable levels including the cost to implement each measure. A sampling of common OPSEC measures is available in “Applying OPSEC to Government Acquisitions and Contracts” at https://www.iad.gov/ioss/. This list is not to be considered exhaustive and is provided as guidance for the development of the program/contract specific list of potential OPSEC measures.

Residual Risk: This section shall contain an analysis of residual OPSEC risk, in terms consistent with the OPSEC methodology selected, as a result of implementation of each OPSEC measure presented.

This section shall identify which OPSEC measures will be implemented and the rationale for those that will not.

X. OPSEC PROGRAM CHRONOLOGY:

This section shall document significant program OSPEC events throughout the lifecycle of the program. Significant events may include changes to the CIL, changes in program leadership or results of program assessments and surveys (including subcontractors). At a minimum, this section shall include a brief description of the event, date of occurrence, actions taken by the contractor and final disposition. A known compromise of critical information need only be referenced in keeping with the intended classification of this document. Note: The history contained herein may be used by the government as a part of an OPSEC or security audit conducted by the contracting activity, DSS or other authorized agency.

XI. ACRONYMS:

This section shall include a complete list of acronyms used in the Program OPSEC Plan.

XII. REFERENCES:

This section shall include a complete list of all references cited in the Program OPSEC Plan.

DRAFT

SAMPLE

PREVIOUS EDITION IS OBSOLETE.

Page of

DD FORM 254, APR 2018

NEEDS DD67

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567 OMB approval expires:

May 31, 2022 The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

b. REVISED (Supersedes all previous specifications.)

4. IS THIS A FOLLOW-ON CONTRACT?

If yes, complete the following:

Classified material received or generated under

5. IS THIS A FINAL DD FORM 254?

If yes, complete the following:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor)

8. ACTUAL PERFORMANCE (Click button to add more locations.)

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

e. NATIONAL INTELLIGENCE INFORMATION:

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

13. SECURITY GUIDANCE

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)

List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form)

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

9.0.0.2.20120627.2.874785 DD 254, "DoD Contract Security Classification Specification" Hide Attachment Bar

This Solicitation DD Form 254 is for planning purposes only. A Prime Contract DD Form 254 will be issued upon contract award.

Field Office - TBD Enter cognizant security office(s) (Name, Address, ZIP Code, Telephone required; Email Address optional).: IMCOM, DPTMS SECURITY DIVISION

ATTN: IMBE-PLS

6630 ASHLEY AVENUE, BLDG 2892

FORT BENNING, GA 31905

7533 Holtz Street Fort Benning, GA 31905

Classified material must be handled in accordance with the current National Industrial Security Program Operating Manual (NISPOM DoD 5220.22M) requirements, and source documents. No classified information and/or materials will be provided to contractor prior to verification of company’s facility clearance and storage capability. In the event that a company needs access to classified information and/or materials as part of this solicitation, a separate contractor-specific DD Form 254 will be issued to each company.

Contractor personnel shall have the appropriate level of investigation and/or security clearance for each site of performance of work. The Contractor shall observe and comply with all security provisions in effect at each selected site. Only U.S. Citizens are authorized to work with U.S. Government classified information and/or material. All contractor personnel working on this contract that require access to classified information and/or material will be required to have a Secret clearance and must maintain that clearance throughout the duration that they are assigned to this contract. Only U.S. Persons are authorized to work with U.S. Government Controlled Unclassified Information (CUI), however, the exception for performance by Non-U.S. Persons are subject to U.S. Export regulation including, but not limited to, the requirements of the Arms Export Control Act, 22 U.S.C. §2751-2794, including the International Traffic in Arms Regulation (ITAR), 22 C.F.R. §120 et seq.; and the Export Administration Act, 50 U.S.C. app. §2401- 2420. Release of CUI to a Non-U.S. Person is not authorized. The contractor will observe and comply with all security provisions outlined in this DD Form 254 and associated SOW/PWS, and all local policies in effect while accessing or working on U.S. Government Installations (as identified in this DD Form 254). Information Disclosure: A Certificate of Non-Disclosure shall be signed and returned to the PCO/COR/ACOR prior to contract award. Copies will be maintained by the PCO/COR/ACOR for the life of the contract/agreement. The contractor shall return all classified/sensitive material, to include program material, to the Government at the completion of this contract.

SECURITY CLASSIFICATION GUIDES (SCGs) will be supplied to the contractor by the COR, as needed and under separate cover, depending on which programs the contractor will be performing on in support of this contract. The SCGs applicable to this contract (to include any future updates) are:

- M830A1 and M908 dated 9/20/2020

- Ctg,120mm AMP, XM1147, dated 9/14/2021

- Ctg, 120mm M829A2 & M829A3, dated 4/14/2020

- Ctg,120mm M829A4, dated 7/27/2022

- Ctg, 105mm Armor Peircing Fin Stabilized Sabot-Tracer (APFSDS-T) family, dated 8/14/2020

- Medium Caliber Family of Munitions SCG (currently in draft)

SEE DD254, BLOCK 13, CONTINUATION SHEET FOR ADDITIONAL SECURITY GUIDANCE.

Any DD Form 254 prepared by Prime Contractor for a subcontractor that identifies a U.S. Government (USG) facility as the actual performance location (Block 8) shall be reviewed by and receive concurrence from the certifying official identified in Block 17 of the DD Form 254 issued to the Prime Contractor. The Prime Contractor FSO shall provide a copy of all subcontractor DD Forms 254 issued under this contract to the JPEO Armaments & Ammunition (JPEO A&A) Security Office and the COR within 5 days of issuance.

Ref 13a: Army regulations available at: www.apd.army.mil.

BLOCKS 10 & 11: SECURITY GUIDANCE

Ref 10a: Communications Security (COMSEC): Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. COMSEC access shall be IAW DoD 5220.22-M. Written concurrence of the GCA is required prior to subcontracting. Access to COMSEC material and/or equipment will be required in the performance of this contract. In addition to the DoD 5220.22-M, contractor shall also follow guidance outlined in AR 380-40. When access is required at Government facilities, contractor personnel will adhere to COMSEC rules and regulations as mandated by Command policy and procedures.

The prime contractor must submit a written request (on company letterhead) to the Contracting Officer (PCO) for authorization to grant COMSEC access to a subcontractor. The request must be approved by the PCO prior to prime contractors granting subcontractor access to COMSEC.

Ref 10e(2): Intelligence Information. Non-SCI Information is not releasable to contractor employees who have not received a clearance at the appropriate security level. Written concurrence of the PCO is required prior to subcontracting. Access to Intelligence information required for performance. The Director of National Intelligence (DNI) has jurisdiction and control of intelligence information and additional security requirements for controlling and protecting intelligence are outlined in “Section 10e(2) Continuation Sheet: Non-SCI Intelligence Information Guidance”. Non-SCI intelligence information is not authorized for public release.

NOTE: DCSA does not conduct security reviews for Sensitive Compartmented Information (SCI) but is still responsible for security reviews involving Non-SCI (collateral classified information) in the possession of a contractor or subcontractor.

Ref 10h: Foreign Government Information (FGI) is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the GCA is required prior to subcontracting. This is information that is provided to the U.S. Government by a foreign government(s), an international organization, or any element thereof, and can be classified or unclassified. This does not include NATO information. Documents containing FGI will be marked as outlined in DoDM 5200.01. The prime contractor must receive written approval from the PCO prior to subcontracting and granting access to a subcontractor.

Ref 10j and Ref 11l: Controlled Unclassified Information (CUI) generated and/or provided under this contract shall be safeguarded and marked as specified in DoD Instruction 5200.48. See Block 13 Continuation Sheet Security Requirements Attachment additional CUI guidance.

Ref 10k: Access to the SIPRNet will be required only at government locations. The contractor shall not access, download, or futher disseminate any special access data (i.e. intelligence, NATO, COMSEC, etc.) outside the execution of the defined contract requirements and without guidance and written permission of the PCO. In the event that any special access is required, the JPEO A&A Security Office and the PCO must modify the requirements permissions identified in the DD Form 254.

The SIPRnet backbone, now accredited to transport NATO Secret information, has resulted in additional precautionary measures as all SIPRnet enclaves, not NATO accredited, still have capability to receive such information. OUSD Memo dated 5 December 2001, Subj: Facilitating Necessary Access to NATO Classified Information, directs that all Department of Defense (DoD) military, civilian, and contractor personnel briefed on their responsibilities for protecting U.S. classified military information, shall be briefed simultaneously on the requirements for protecting NATO classified information. The Contractor Facility Security Officer (FSO) shall provide a NATO awareness briefing to cleared contractor personnel and shall maintain a written acknowledgement of the individual's receipt of the awareness briefing along with statement of understanding of responsibilities for safeguarding NATO classified information. The NATO awareness briefing is not a NATO access briefing and does not constitute approval for access to NATO. The NATO awareness briefing shall not be entered in Defense Information System for Security (DISS) or its successor system.

Ref 11a: Contractor performance is restricted to locations identified in Block 13. Government agency or activity will provide security classification guidance for performance of this contract. Contractor shall submit visit requests through DISS to the appropriate Security Management Office (SMO) for clearance verification. For personnel working/visiting JPEO A&A (Picatinny Arsenal, NJ), submit visit requests to DISS SMO W6DTAA-JPEO AMMO-118, listing the COR as POC for the visit and the date range of the visit for up to a one year period. Visit request shall be submitted prior to contractor personnel start of work, and shall be updated annually throughout the life of the contract.

Ref 11j: The contractor shall develop an OPSEC Standing Operating Procedure (SOP)/Plan within 90 calendar days of contract award, to be reviewed and approved by the responsible Government OPSEC officer, per AR 530-1, Operations Security. This SOP/Plan will specify the government’s critical information, why it needs to be protected, where it is located, who is responsible for it, and how to protect it. In addition, the contractor shall identify an individual who will be an OPSEC Coordinator. The contractor will ensure that this individual becomes OPSEC Level II certified per AR 530-1. Training can be received from either the Army OPSEC Support Element (OSE) or the Interagency OPSEC Support Staff (IOSS). Per AR 530-1, Operations Security, new contractor employees must complete Level I OPSEC training within 30 calendar days of their reporting for duty. All contractor employees must complete annual OPSEC awareness training. Enclosure 1 of this Attachment provides guidance regarding the format of the OPSEC plan. The contractor shall deliver an OPSEC SOP/Plan to the COR for review and approval by the responsible Government OPSEC officer.

Ref 11m: Common Access Card (CAC) Issuance. Before CAC issuance, the contractor employee requires, at a minimum, a favorably adjudicated Tier 1 (T1) investigation or an equivalent or higher investigation in accordance with Army Directive 2014-05. The contractor employee will be issued a CAC only if duties involve one of the following: (1) both physical access to a DoD facility and access, via logon, to DoD networks on-site or remotely; (2) remote access, via logon, to a DoD network using DoD-approved remote access procedures; or (3) physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. The Contractor and subcontractor(s) (when applicable) shall account for all forms of Government-provided identification credentials issued to contractor personnel under the contract or subsequent task orders. The Contractor shall return the CAC to the COR as soon as possible after the occurrence of one or more of the following circumstances:

- When no longer needed for contract performance.

- Upon completion/termination of the Contractor employee’s employment.

- Upon task completion or termination.

- Revocation of CAC eligibility.

The PCO may delay final payment under the contract or subsequent task orders, if the Contractor (or subcontractor) fails to comply with these requirements.

Additional Training Requirements:

Antiterrorism Training. All contractor employees requiring access to any Federally-controlled facility and logical access to Federally controlled information systems except for national security systems as defined by 44 U.S.C. 3542(b)(2), shall be certified in Level 1 Anti Terrorism Training. The training is accessible from any computer with access to the World Wide Web and is available at https:/atlevel1.dtic.mil/at. The contractor is responsible for ensuring that the training has been satisfactorily completed within 30 calendar days after contract award and that valid certificates of completion have been submitted to the Contracting Officers Representative (COR) with a copy furnished to the Contracting Officer. The Certificates are valid for one year; therefore, training shall be completed every year for the duration of the contract. AT level I awareness training is available at the following website: http://jko.jten.mil/courses/atl1/launch.html.

Access to Government Information Systems. All contractor employees with access to a government information system shall be registered in the Army Training Certification Tracking System (ATCTS) at the commencement of any services, and shall successfully complete the DoD Information Assurance (IA) awareness training before issuance of network access and annually thereafter.

iWATCH Training. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days after contract award and within 30 calendar days of new employees commencing performance. The contractor is responsible for ensuring that the training has been satisfactorily completed with the results reported to the COR.

Threat Awareness Reporting Program (TARP). Per AR 381-12, contractor employees must receive mandatory TARP training within thirty (30) days of employment and annually thereafter. Only TARP training by a CI agent is authorized unless the conditions in paragraph 2-4i apply. In addition, contractors will report threat-related incidents, behavioral indicators and other matters of CI interest specified in AR 381-12, Chapter 3.

DD254, Block 13, Section 10e(2) Continuation Sheet:

Non-SCI Intelligence Information Guidance

As defined in Executive Order 12333 of December 4, 1981, "United States Intelligence Activities", foreign intelligence is defined as "... information relating to the capabilities, intentions and activities of foreign powers, organizations or persons...including information on international terrorist activities."

Pursuant to the provisions and definitions of Executive Order 12333, this guidance provides security requirements in addition to the DOD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), regarding the release, control, dissemination, and use of intelligence information in support of JPEO A&A contracts.

Requirements for access to Intelligence Information:

1. Intelligence provided under this contract may be used only for that purpose. Contractors are not authorized to disclose further or release intelligence to any of their components or employees not directly engaged in providing services under this contract or to another contractor (including subcontractors) without prior written approval from the Contracting Officer. All requests will be submitted to the Contracting Officer on company letterhead.

2. Contractors will not release intelligence to foreign nationals or immigrant aliens (including those employed by the contractor), foreign contractors or subcontractors (including a US subsidiary of a foreign-owned company), foreign governments, or international organizations without prior written approval from the Contracting Officer. All requests will be submitted to the Contracting Officer on company letterhead.

3. Contractors performing duties inside a Government owned or controlled facility will follow security procedures of the host organization and this addendum.

4. Contractors performing duties outside of Government owned or controlled facilities will establish procedures to control all intelligence received, produced, and held by them in accordance with the NISPOM and this addendum.

5. Intelligence documentation provided to contractors, all reproductions thereof, and all other material generated based on or incorporating data there from (including authorized reproductions), remain the property of the US Government. All reproductions and extractions of intelligence shall be classified, marked, and controlled in the same manner as the original(s).

6. Upon termination of this contract, the contractor will submit a written request to the Contracting Officer for disposition instructions for all intelligence materials that were provided in support of the contract. Intelligence material will not be destroyed without the written approval from the Contracting Officer.

7. Intelligence documentation, reproductions, and/or other material generated based on or incorporating intelligence information, or to retain it for use on another contract, must be approved by Contracting Officer. The request will cite the document’s number, title or subject, originator, publication date, and overall classification. Intelligence documentation not specifically authorized for retention or destruction will be returned to the Contracting Officer or Technical Representative.

Inquiries/correspondence concerning this guidance will be addressed to JPEO A&A Security Office, SFAE-AA, Picatinny Arsenal, NJ 07806-5000.

DD254, Block 13, Section 10j and 11l Continuation Sheet:

Controlled Unclassified Information (CUI)

CONTROLLED UNCLASSIFIED INFORMATION (CUI)

1. The definition of CUI is unclassified information that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Government-wide policies. It does not include information that is classified pursuant to Executive Order 13526, dated December 29, 2009, or the Atomic Energy Act, as amended.

2. Contractor employees will require access to CUI in performance of this contract. Contractor personnel shall follow DoD Instruction (DoDI) 5200.48, Army CUI policies, and this document regarding access to CUI, and the marking, handling, storage, transmission, and destruction of CUI while working on this contract. Contractor employees are required to complete initial CUI training within 30 days of start of performance on the contract, and then annually thereafter. Proof of completion shall be provided to COR and/or PCO. Training is available at https://securityawareness.usalearning.gov/cui/index.html.

3. Specific Handling Instructions: All email correspondence containing CUI will be digitally encrypted IAW AR 25-1, para. 4-10c, dated 15 July 2019. In the event that encrypted email cannot be used to transmit CUI, there are several encryption tools available for use to accomplish this requirement: The DoD Safe Access File Exchange (SAFE) website (https://safe.apps.mil/) and/or the Encryption Wizard tool (http://spi.dod.mil/).

4. When CUI is to be provided to or generated by DoD contractors, the controls and protective measures to be applied shall be described in the pertinent contract documents (e.g., contract clause; statement of work; or DD Form 254, “Department of Defense Contract Security Classification Specification”). Solicitations and contracts shall use a non-disclosure of information clause that prohibits release of unclassified information to the public without approval of the contracting activity.

5. The Contractor shall not release to anyone outside the Contractor's organization any unclassified information, regardless of medium (e.g., film, tape, document), pertaining to any part of this contract or any program related to this contract without prior approval from the government.

6. GOVERNMENT DISTRIBUTION STATEMENTS: Will be added to all technical documents generated during the execution of this contract, in accordance with DoD Instruction 5230.24. Consult the security classification guide(s) (SCGs) identified in the DD Form 254 for guidance on the applicable distribution statements associated with the program or project. For additional guidance regarding the application of a distribution statement, consult with the COR/Technical Representative and/or the PCO.

7. Technical Documents are any recorded information that conveys scientific and technical information or technical data. This includes such informal documents as working papers, memoranda, and preliminary reports when such documents have utility beyond the immediate mission requirement or will become part of the historical record of technical achievements. It can also refer to any recorded information related to experimental, developmental, or engineering works that can be used to define an engineering or manufacturing process or to design, procure, produce, support, maintain, operate, repair, or overhaul program material. The data may be graphic or pictorial delineations in media, such as computer software, drawings, or photographs, text in specifications, or related performance or design documents, or computer printouts. Examples of technical data include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software.

8. The contractor shall protect CUI from unauthorized disclosure by appropriately marking, safeguarding, disseminating, and destroying such information.

9. CUI may be identified in security classification guides to ensure the information receives appropriate protection. Contractor personnel are responsible for reading and understanding the guidance outlined in the SCG(s) used by the program(s) they are directly supporting and following the determinations and decisions documented in the SCG(s).

10. DFARS Clause 252.204-7012 applies to this contract. Any information identified and/or marked as FOUO, CUI, or containing a Distribution Statement B-F shall be considered “Covered Defense Information” as defined in DFARS Clause 252.204-7012.

11. For unauthorized disclosures of CUI, no formal security inquiry or investigation is required. However, appropriate management action shall be taken to fix responsibility for unauthorized disclosure of CUI whenever feasible or required by other guidance, and appropriate disciplinary action shall be taken against those responsible. The FSO shall notify the PCO and the DoD Component that originated the CUI of its unauthorized disclosure. The unauthorized disclosure for CUI protected by the Privacy Act may result in criminal sanctions and disciplinary action may be taken against those responsible.

12. Additional resources regarding the DoD CUI program, to include access to DoDI 5200.48, can be found in the DoD CUI website, www.dodcui.mil.

ADDITIONAL GUIDANCE FOR INFORMATION MARKED AS FOR OFFICIAL USE ONLY (FOUO)

1. The “FOR OFFICIAL USE ONLY” (FOUO) marking is assigned to information at the time of its creation in a DOD User Agency. It is not authorized as a substitute for a security classification marking but it is used on official government information that may be withheld from the public under exemptions 2 through 9 IAW Army Regulation 25-55, The Department of the Army Freedom of Information Act Program and DoD Manual (DoDM) 5200.01, Vol. 4.

2. With the issuance of DoDI 5200.48, the DoD cancelled DoDM 5200.01, Vol.4, making the FOUO marking obsolete and legacy. Information provided to or held by the contractor that is marked as FOUO shall be handled in the following manner:

a. Legacy FOUO information and materials are not required to be re-marked or redacted while it remains under contractor control. However, when the legacy information is incorporated into, or cited in, another document or material, it must be reviewed for CUI and marked in accordance with DoDI 5200.48.

b. Legacy FOUO does not automatically become CUI. It must be reviewed by the owner of the information to determine if it meets or falls under one of the CUI categories listed in the CUI Registry. If it meets the new CUI requirements, it will be marked in accordance with DoDI 5200.48.

3. When no longer needed, all FOUO material will be destroyed by shredding. Electronic media will be purged with approved software or destroyed through a physical process.

4. Use of the above marking does not mean that the information cannot be released to the public, only that it must be reviewed by the Government prior to its release to determine whether a significant and legitimate government purpose is served by withholding the information, or portions of it, from the public.

SECTION 18 - REQUIRED DISTRIBUTION

PLEASE ENSURE ALL PARTIES LISTED ON THIS DISTRIBUTION RECEIVE A COPY OF THE DD254 WITH ALL ATTACHMENTS

a. PRIME CONTRACTOR:

TBD

**In the event of a possible compromise of classified information under the control of the contractor, the contractor will immediately notify:

c. COGNIZANT SECURITY OFFICE FOR PRIME CONTRACTOR:

Defense Counterintelligence & Security Agency (DCSA) Insert Appropriate Field Office Information

e. CONTRACTING OFFICER:

Jennifer Rustwick Army Contracting Command – New Jersey Phipps Road, Building 10 Picatinny Arsenal, NJ 07806-5000

(973) 724-6812 jennifer.m.rustwick.civ@army.mil

CONTRACTING OFFICER OR TECHNICAL REPRESENTATIVE:

CPT Jer Nichols SFAE-AA-MAS, Building 354 Picatinny Arsenal, NJ 07806-5000 973-724-5215 jer.m.nichols.mil@army.mil

f. OTHERS AS NECESSARY:

Naomi Shareef or Jason Hayman Command Security Managers JPEO Armaments & Ammunition, SFAE-AA Picatinny Arsenal, NJ 07806-5000 (973)724-9877 or (973) 724-9775 naomi.j.shareef.civ@army.mil and/or jason.j.hayman.civ@army.mil

REVIEWER ACKNOWLEDGEMENT AND SIGNATURE: The undersigned have reviewed this DD Form 254 and its accompanying attachment(s) and concur with the security requirements outlined therein. The COR will ensure that the prime contractor complies with these requirements as best as possible within the limits of his/her responsibility, and that any violations are brought to the attention of the PCO and the JPEO A&A Security Office.

text: CPT Jer Nichols jer.m.nichols.mil@army.mil 201-874-0539

PM MAS

rep: Security Manager Ft. Benning, GA

DSS does not conduct security reviews for Sensitive Compartmented Information (SCI) but is still responsible for security reviews involving Non-SCI (collateral classified information) in the possession of a contractor or subcontractor.

ATTN: ACC-NJ-MA

Picatinny, NJ 07806-5000 Enter address (include zip code).: 1 Buffington Rd.

ATTN: SFAE-AA

Picatinny, NJ 07806-5000