Hydraulics_TRaK_Drawings.pdf

C

A

D

D

C

B

A

CONTRACT NUMBER

CAGE CODESIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: C_TACOM_ENG_1_0

DRAWING SIZE C

DWG NO.

MIN.56

HEX.750

REF.440

REF.594

1 OF 12.000

1304192819200C

FITTING, ADAPTER

US ARMY ARDEC

ARMAMENT RESEARCH DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NJ 07806-5000

TOMIK

D.LEED.LEE

2012-11-6J.COOK

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

M777A2 13041977

PMIC

A

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAW REVMODEL REV

INITIAL RELEASE X-X-

PART NO. 13041928

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN

SUGGESTED SOURCES OF SUPPLY

PART NUMBER VENDOR PART NUMBER CAGE CODE NAME AND ADDRESS

13041928 4-4FMK4SS 30780

PARKER HANNIFIN CORPORATION,

TUBE FITTING DIVISION

3885 GATEWAY BOULEVARD

COLUMUBS, OH

13041928 SS-4-HN-4RS 3T9T9

SWAGELOK

29500 SOLON ROAD

SOLON, OH

.010 .005

NOTES:

1. APPLICABLE SPECS/STANDARDS:

A. ASME Y14.5M-2004

B. ASME Y14.1

C. ASME Y14.100-2000

2. MATERIAL: AISI 300 SERIES IN ACCORDANCE WITH

ASTM A276.

3. STUD END TO BE ISO 1179-3 TYPE G - G 1/4 B

THREAD TO BE ISO 228-1

4. STUD END TO IN ACCORDANCE WITH SAE J514

THREAD TO BE ANSI B1.20.3

5. GENERAL DESCRIPTION: STUD TYPE ADAPTER, STRAIGHT

G 1/4 B (BSP) TO 1/4-18 NPTF

6. BORE DIAMETER IS TO BE UNIFORM THROUGHOUT.

7. HYDRAULIC CLEANLINESS - TO CONFORM TO

ISO/TR 10949 2002: THE COMPONENT MUST BE

CLEANED AND PACKAGE TO A LEVEL THAT WOULD

BE SUITABLE FOR INSTALLATION INTO A SYSTEM THAT

HAS AN OIL CLEANLINESS OF ISO 4406 23/21/16

8. IDENTIFICATION OF THE "SUGGESTED SOURCE(S) OF SUPPLY"

HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF

PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF

SUPPLY FOR THE ITEM DESCRIBED ON THIS DRAWING.

DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

VENDOR ITEM DRAWING

ISOMETRIC VIEW

FOR REFERENCE ONLY

SECTION A-A

1/4-18 NPTF

ANSI B1.20.3

G 1/4 B

ISO 228-1

D

D

C

B

A

CONTRACT NUMBER

CAGE CODESIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: C_TACOM_ENG_1_0

DRAWING SIZE C

DWG NO.

( )3.380 ( )2.250

( )16.590

( )2.310

( )1.000

1 OF 10.250

1304194119200C

HYDRAULIC CYLINDER

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

D.LEED.LEE

2015-01-21J.COOK

D.LEE

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

M777 TRAK13041942

PMIC

A

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAW REVMODEL REV

2002-05-04INITIAL RELEASEX-X-

PART NO. 13041941

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

APPROVED SOURCES OF SUPPLY

PART NUMBER MANUFACTURER'S PART NUMBER CAGE CODE NAME AND ADDRESS

13041941 RC-258 26952

ACTUANT CORP DBA ENERPAC

6100 N BAKER RD

P.O. BOX 3241

MILWAUKEE, WI 53209

NOTES

1. APPLICABLE SPECS/STANDARDS:

A. ASME Y14.5M-1994

B. ASME Y14.1

C. ASME Y14.100-2000

2. ONLY THE ITEM(S) DESCRIBED ON THIS DRAWING WHEN

PROCURED FROM THE SOURCE(S) LISTED HEREON IS

APPROVED BY US ARMY ARMAMENTS RESEARCH, DEVELOPMENT

AND ENGINEERING CENTER (ARDEC), PICATINNY ARSENAL, NJ

07806-5000 FOR USE IN THE APPLICATIONS(S) SPECIFIED

HEREIN. A SUBSTITUTE ITEM SHALL NOT BE USED WITHOUT

PRIOR APPROVAL BY ARDEC.

3. IDENTIFICATION OF THE APPROVED SOURCE(S) OF SUPPLY

HEREIN IS NOT TO BE CONSTRUED AS A GUARANTEE OF

PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF

SUPPLY FOR THE ITEM DESCRIBED ON THIS DRAWING.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SOURCE CONTROL DRAWINGISOMETRIC VIEW

FOR REFERENCE ONLY

D

B

A

D

C

B

A

8 7 6 5 4 3 12

DESIGN ACTIVITY

SIZE CAGE CODE

SCALE UNIT WT.

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVALMATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

SHEET

DRAWING SIZE D

TOLERANCES ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: D_TACOM_ENG_1_0 12345678

DWG NO.

143.00 24.00

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV

RLV2018-04-27

PRODUCT BASELINE

ERR L18A2026

1 OF 1 0.750

1304192719200D

HOSE ASSEMBLY

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

2017-10-01GABRIEL JARANI

2017-10-01JONATHAN KING

TOMIK

D.LEED.LEE

2012-10-23J.COOK

APPLICATION

USED ONNEXT ASSY

M777A213041944

PMIC

A

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH LEE

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

PART NO. 13041927

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN

PARTS LIST

ITEM PART NUMBER QTY TITLE REMARKS

1 ISO7241-1_B-4-F_NPT 1 COUPLING, ISO 7241-1 SEREIS B - FEMALE - 1/4 NPT

2 ISO7241-1_B-4-M_NPT 1 COUPLING, ISO 7241-1 SERIES B - MALE - 1/4 NPT

3 SAEJ516_4-4-P150193S 2 HOSE FITTING, 1/4 NPT

4 SAEJ516_4-4-P240193S 1 HOSE FITTING, 37 DEGREE FLARE - STRAIGHT

5 SAEJ516_4-4-P242293S 1 HOSE FITTING, 37 DEGREE FLARE - 45 DEGREE ELBOW

6 SAEJ517_43-4-00024 1 HOSE, 1/4 ID - SAE100R17

7 SAEJ517_43-4-00143 1 HOSE, 1/4 ID - SAE100R17

DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

.100 .010

5 5

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.5M-2004

B. ASME Y14.100-2000

2. ALL FLEXIBLE HOSE TO BE SAE100R17

OR BETTER IN ACCORDANCE WITH

SAE J517 AND RATED TO 3,000 PSI WORKING

PRESSURE.

3. ALL FITTINGS TO IN ACCORDANCE WITH SAE J516

AND MADE FROM STAINLESS STEEL

4. ALL HOSE FITTINGS ARE TO BE PERMANENTLY

FIXED DURING HOSE ASSEMBLY

5 ALL NPT FITTINGS TO BE SEALED WITH PTFE

TAPE PRIOR TO ASSEMBLY IAW A-A-58092.

6. ASSEMBLY TO BE PRESSURE TESTED TO 3,500 PSI

7. HYDRAULIC CLEANLINESS - TO CONFORM TO

ISO/TR 10949 2002: THE COMPONENT MUST BE

CLEANED AND PACKAGE TO A LEVEL THAT WOULD

BE SUITABLE FOR INSTALLATION INTO A SYSTEM THAT

HAS AN OIL CLEANLINESS OF ISO 4406 23/21/16.

8. ITEM IDENTIFICATION: APPLY THE FOLLOWING MARKINGS

TO CONTAINER IN ACCORDANCE WITH MIL-STD-130.

"19200-13041927"

MFR-(CAGE CODE)

1 1

D

B

A

D

C

B

A

8 7 6 5 4 3 12

DESIGN ACTIVITY

SIZE CAGE CODE

SCALE UNIT WT.

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVALMATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

SHEET

DRAWING SIZE D

TOLERANCES ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: D_TACOM_ENG_1_0 12345678

DWG NO.

74.0�$�

MAX.358

.035

.250

158.2�$�

150.6�$�

41.2�$�

160.7�$�

1.500 1.000

4.000

.875

10.500

2.000

12.500

.01 .005

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.5M-2004

B. AMSE Y14.100-200

2. TUBE TO BE MANUFACTURED FROM STEEL CRES:

ASTM A269 OR ASTM A276: 316, UNS S31600 OR

316L, UNS S31603

FITTING TO BE MANUFACTURED FROM STEEL CRES:

ASTM A276: 316, UNS S31600 OR 316L, UNS 31603

3. END FITTINGS AND FLARED ENDS TO BE 37�$� PER

SAE J514 FIGURE 1A (THREE PIECE TUBE ASSEMBLY)

4. THE PIPE ASSEMBLY MUST BE RATED FOR OPERATION

OPERATION AT TEMPERATURES FROM -46�$�C TO 70�$�C

5. SERVICE PRESSURE 207 BAR OIL. THE PIPE MUST BE

PROOF TESTED TO 315 BAR PRESSURE; A FAILURE OCCURS

IF THERE IS ANY INDICATION OF DEFORMATION, SPLITTING,

CRACKING OR LEAKING.

6 FEMALE THREAD SIZE 7/16" - 20 UNF - 2B

7 NOMINAL TUBE SIZE

8. HYDRAULIC CLEANLINESS - TO CONFORM TO

ISO/TR 10949 2002: THE COMPONENT MUST BE CLEANED

AND PACKAGED TO A LEVEL THAT WOULD BE SUITABLE

FOR INSTALLATION INTO A SYSTEM THAT HAS AN OIL

CLEANLINESS OF ISO 4406 23/21/18.

9. PROTECTIVE FINISH: NONE

10.ITEM IDENTIFICATION: APPLY THE FOLLOWING MARKINGS

TO CONTAINER IN ACCORDANCE WITH MIL-STD-130.

"19200-13041971"

MFR-(CAGE CODE)

ISO VIEW

SCALE 0.500

2-NUT-SAE J514-4-4-070110S

2-SLEEVE-SAE J514-4-4-070115S

SECTION A-A

TUBE FLARE SECTION

SCALE 2.000

SECTION B-B

TUBE SIZE SECTION

SCALE 6.000

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV

RLV2018-04-27

PRODUCT BASELINE

ERR L18A2026

1 OF 10.000 1.000

1304197119200D

PIPE ASSEMBLY

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

2017-10-01GABRIEL JARANI

2017-10-01JONATHAN KING

TOMIK

LEEJ. STANILIOUS

2012-04-04J.COOK

APPLICATION

USED ONNEXT ASSY

M777A213041944

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH LEE

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

PART NO. 13041971

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN

7 6 5 4 3 2 1

8 7 6 5 4 3 2 1

H

G

F

E

D

C

B

A

H

G

F

D

E

C

A

DRAWING SIZE E

FORMAT: E_TACOM_ENG_1_0 8

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

B

SIZE CAGE CODE

SCALE SHEETUNIT WT.

DESIGN ACTIVITYCONTRACT NUMBER

CONTRACTOR

DRAWN BY DATE (YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVALMATL ENGR MODELED BY

PMIC

DWG NO.

74.0�$�

.250

.049

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV

RLV2018-04-27

PRODUCT BASELINE

ERR L18A2026

J.COOK 2014-10-28

D.LEE J.COOK

JONATHAN KING 2017-10-01

GABRIEL JARANI 2017-10-01

DO NOT SCALE DRAWING

J.COOK 1 OF 10.000 1.500

1305700519200E

HARDLINE, TRAK

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

M777A2 TRAK

NEXT ASSY USED ON

APPLICATION

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

NSN

PART NO. 13057005

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

PIPE BENDING AND TERMINATION POINT COORDINATES

POINT

COORDINATE

X Y Z

BEND

RADIUS

A 0 -9.5 0 0.5

B 0 -11.11 2.08 0.5

C -14.52 -11.11 2.08 0.5

D -16.03 -11.11 0.45 0.5

E -16.03 -8.11 0.45 0.5

F -17.15 -6.11 0.45 -

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2004

B. ASME Y14.5M-1994

2. TUBE TO BE MANUFACTURED FROM SEAMLESS STAINLESS

STEEL, ASTM A269, GRADE UNS S30400 OR S31600.

FITTINGS ARE TO BE MANUFACTURED FROM STEEL CRES:

ASTM A276: 316L, UNS S31603 OR

EN 10088-3: X2CrNiMo17-12-2 (1.4404)

3. END FITTINGS & FLARED ENDS TO BE 37�$� PER SAE J514

FIGURE 1A (THREE PIECE TUBE ASSEMBLY)

4. THE PIPE ASSEMBLY MUST BE RATED FOR OPERATION AT

TEMPERATURES FROM -46�$�C TO +70�$�C.

5. SERVICE PRESSURE 207 bar OIL.

FOR FIRST ARTICLE INSPECTION ONLY, THE PIPE MUST BE

PROOF TESTED TO 315 BAR PRESSURE; A FAILURE OCCURS

IF THERE IS ANY INDICATION OF DEFORMATION, SPLITTING,

CRACKING OR LEAKING.

6. ITEM IDENTIFICATION: APPLY THE FOLLOWING

MARKING TO CONTAINER IN ACCORDANCE

WITH MIL-STD-130.

"19200-13057005"

MFR-[CAGE CODE]-[PART NO.]

7 FEMALE THREAD SIZE 7/16"-20 UNF-2B

MINOR �n�.3834"-.3949" PITCH �n�.4050"-.4104" MAJOR �n�.4375" MIN

8 NOMINAL TUBE SIZE.

9. HYDRAULIC CLEANLINESS: CLEANLINESS SHALL BE

IN ACCORDANCE WITH ISO/TR 10949. PRIOR TO ASSEMBLY

ENSURE THAT ALL INTERNAL COMPONENTS HAVE BEEN CLEANED

TO A CLEANLINESS LEVEL THAT WOULD BE SUITABLE FOR

INSTALLATION INTO A SYSTEM THAT HAS AN OIL CLEANLINESS

LEVEL OF 23/21/18 IN ACCORDANCE WITH ISO 4406.

THE FOLLOWING APPLIES:

A. THE ASSEMBLY MUST BE VISUALLY INSPECTED TO BE CLEAN OF ALL

DEBRIS, FLUX, DIRT, BURRS AND OTHER SURFACE CONTAMINATION.

B. CLEANLINESS IS TO BE MAINTAINED FOLLOWING ASSEMBLY, BY

CAPPING ALL OPEN PORTS.

10. PROTECTIVE FINISH: NONE

11. PIPE TERMINATION POINTS HAVE A 2mm ALLOWANCE ADDED

FOR THE REDUCTION IN LENGTH IN FORMING THE FLARE.

NO ADDITIONAL ALLOWANCE IS TO BE ADDED.

12. ALL SHARP INTERNAL AND EXTERNAL CORNERS TO

BE REMOVED. MAXIMUM RADIUS OR CHAMFER OF

0.5mm TO BE USED.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

A

B

C

D

E

F

SECTION THROUGH NUT

SHOWING TUBE FLARE

SCALE 4:1

Y

-Y

Z

-Z

X

-X

X0,Y0,Z0

2-NUT-SAE J514-4-4-070110S

2-SLEEVE-SAE J514-4-4-070115S

SECTION XSEC0001-XSEC0001

SEE DETAIL A