UT T WELD PROP DRAWING.pdf
PDF 340 KB Posted
- Attached to
- UT T WELD PROP
- Solicitation number
- SPMYM223Q1735
About this file
This document includes a technical drawing file and related federal contract opportunity. The technical drawing file provides specifications for twenty test props requiring full penetration T-welds of 1.50" thick plate that is 16" long and wide, with a 1.25" thick riser extending 1.50" from the plate. Defect indications are required for the toes, center root, and in between locations of each prop, with four of the twenty also needing a 0.125" depth/height and 1" long transverse center plate indication. The defects should be between 0.0625" to 0.200" in depth/height and 0.375" to 1.5" in length. Inspection is required from the surface to 0.5" into the plate and between the toes.
The related federal contract opportunity is solicitation number SPMYM223Q1735 for UT T WELD PROP from the Defense Logistics Agency Land and Maritime. No further details are provided on the opportunity requirements, response dates, pricing terms, set asides, or incumbent.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM223Q1735.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
(20) each props: Full penetration T-Weld. Plate Thickness 1.50” Plate 16” long 16” wide with a 1.25” thick riser extending 1.50” from plate.
(3 to 4) indications for each prop. Mostly toes, some center root, some in between. Different locations and depths see sample above. Try to make each prop slightly different. (4) of the 20: place a .125” depth/height, 1” long indication in center of plate transvers to the weld The height/depth for defect should be minimum .0625” to .200” Length .375” to 1.5”
Inspection area is from surface to ¼” into plate. Toe to toe.
Top View riser on back side
Sample of locations
1.500”
1.500”
16.00”
5/8” minimum Fillet
16.00”
16.00”
1.250”
Material Carbon Steel
File details come from the government source that posted it. Updated .