TEST_PLAN.pdf
PDF 33 KB Posted
- Solicitation number
- FD20302500289
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Data Item Description (DID) template for a First Article Qualification Test Plan and Procedures document. DI-NDTI-81307A, approved November 21, 2006, establishes the format and content requirements for contractors to develop test procedures, test equipment specifications, and inspection criteria used during first article qualification testing. The DID is maintained by the Naval Sea Systems Command (NS/I522) and supersedes the earlier DI-NDTI-81307 version.
The plan must be submitted in the contractor's format and include five primary content sections: purpose of test, applicable documents, description of units to be tested, test description, and inspection criteria. The test description section requires step-by-step operator procedures for each test, definitions of readings and settings to be used, descriptions of test equipment with commercial identification, and drawings or schematics of any noncommercial fixtures or testers. The inspection criteria section must define minimum performance requirements for Government acceptance, including worst-case prime power input conditions, worst-case signal level and timing inputs, and signal level and timing outputs. This template is applicable to federal contracts requiring first article qualification documentation and contains no reference documents, applicable forms, or DTIC/GIDEP applicability.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PKGRQMT_REPORT.pdf | ||
| IUID.pdf | ||
| CDRL_REPORT.pdf | ||
| TRNSP_DATA.pdf | ||
| TEST INSPECTION REPORT.pdf | ||
| SPRTA1-26-Q-0268.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
Source: http://assist.dla.mil -- Downloaded: 2024-10-29T17:30Z
Check the source to verify that this is the current version before use.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
Source: http://assist.dla.mil -- Downloaded: 2024-10-29T17:30Z
Check the source to verify that this is the current version before use.
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .