Technical characteristics for Prosthetic Materials and Silicone.pdf

Vendor must meet following Technical characteristics for Prosthetic Materials and Silicone:

• Material must not contain any electrical components

• Admixtures, Curing Polymers, Pozzolans, Reinforcements, Water Reducers and

Viscosity Modifiers

• Colorants and fillers made especially for urethanes, epoxies and silicones for creating amazing finishes and effects.

• Casting resins used for making impact tooling or fixtures and are also used for encapsulating and potting applications

• Coatings are brushed on to protect 3D prints, rigid foams and other surfaces as well as bar tops and for encapsulation.

• Laminating resins used with glass fiber and other reinforcements to create indestructible lightweight parts for composite applications.

• Putties used for a variety of fabrication or sculpting applications, are available as rigid or semi-rigid.

• Casting or mold making gypsum and plaster needs.

• Mold making supplies for all your natural latex mold making, casting, and mask making needs.

• Alginates are quick and economical; good for making single use molds of the hands, face, etc.

• Skin safe silicones are used to make lasting molds used over and over for casting resins, wax and more.

• Professional Kits & Accessories for Creating Realistic Skin FX..

• Quality sealers and mold releases for all your mold making and casting processing requirements.

• Modeling Clays and Sculpting Accessories

• Flexible and strong silicone foams used for a variety of industrial and special effects applications

• Additional cure silicones, these are two-component high tear strength, flexible mold or casting rubber compounds with long library life.

• Condensation-cure silicones, these are two-component materials which cure at room temperature (RTV) to flexible, high tear-strength rubbers.

• Starter Kits

• Tools and equipment for mold making, casting, and sculpting applications

• Expanding flexible foams

• Mix and pour, high quality urethane foams are fast curing and used for industrial, military and art related applications

• Easy to use plastics with tremendous versatility and economy that are perfect for casting detailed models, props and cast effect pieces.

• Industrial and art-related applications, urethane rubbers that are easy to use and exhibit good wear resistance.