Supplement_15_-_Attachment_B_-_Specification_813-5446R1.docx

State of California Bid Specification Commodity Title <optional: agency name/location> Spec #, Rev # Event ID Attachment/Exhibit #

State of California Bid Specification

HERBICIDES, INSECTICIDES

6813-5446R2 1-21-68-13 *Supplement 15* Attachment B

Document Summary

Revision History Bid Spec Rev Level Revision Date

Table of Contents

SCOPE

This document establishes requirements for pesticides – herbicides and insecticides, used in the State of California by agencies and departments. All proposed herbicide products must be registered with California Department of Pesticide Regulation (CDPR) of California Environmental Protection Agency (CalEPA).

APPLICABLE LAWS AND INDUSTRY STANDARDS

Specifications and standards referenced in this document in effect on the opening of the Invitation for Bid (IFB) form a part of this specification where referenced. Where applicable, the latest version of the reference document shall be used. Consistent with the General Provisions, this specification does not preclude compliance with other federal, state, or local laws and regulations that may apply.

1.1 LAWS and REGULATIONS

1.1.1 The Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and Federal Environmental Pesticide Control Act (FEPCA) of USEPA

1.1.2 California Code of Regulations (Title 3. Food and Agriculture) Division 6. Pesticides and Pest Control Operations, Chapter 2. Pesticides, Subchapter 1. Pesticide Registration

1.1.3 California Code of Regulations (Title 3. Food and Agriculture) Division 6. Pesticides and Pest Control Operations, Chapter 3. Pest Control Operations, Subchapter 2. Work Requirements, Article 4. Storage, Transportation and Disposal

REQUIREMENTS

1.2 PERFORMANCE AND DESCRIPTION

The herbicides are grouped by the Mode of Action (MOA) of active ingredients classified by Herbicide Resistance Action Committee (HRAC).

Note: Refer to the product specification and/or brochure of each pesticide for full detailed product description.

Group 1 – *Inhibition of Acetyl CoA Carboxylase/*Lipid Biosynthesis (Cell Growth) Inhibitor

1.2.1 Herbicide – Fluazifop

The product shall be formulated as a postemergence herbicide for the control of annual and perennial grass weeds in ornamentals and certain landscape areas, roadsides and commercial areas.

Active Ingredient: 24.5% Fluazifop-P-Butyl Reference Brand: Fusilade II Turf and Ornamental

Group 2 – *Inhibition of Acetolactate Synthase/*Amino Acid synthesis Inhibitors

1.2.2 Herbicide – Chlorsulfuron

The product shall be formulated for control of annual, biennial, and perennial weeds Telar XP on public land and on rights-of-way, industrial sites, etc.

Active ingredient: 75% Chlorsulfuron Reference Brand: Telar XP

1.2.3 Herbicide – Imazamox

This product is formulated to control submerged aquatic vegetation on sites including ponds, lakes, reservoirs, wetlands, marshes, swamps, bayous, arroyos, ditches, canals, streams, rivers, creeks and other slow-moving bodies of water. It may also be used on non-cropland sites including areas that may be crazed or cut for hay.

Active ingredient: 12.1% ammonium salt of Imazamox Reference Brand: Clearcast

1.2.4 Herbicide – Imazapyr

This product shall be formulated as an aqueous solution to be mixed with water and surfactant and applied as a spray solution to control floating and emergent undesirable vegetation in or near bodies of water which may be flowing, non-flowing, or transient. Aquatic sites consist of standing and flowing water, estuarine/marine, wetland and riparian areas and non-irrigation ditch banks.

Active ingredient: 27.77%, Isopropylamine salt of Imazapyr Reference Brand: Habitat

1.2.5 Herbicide – Imazapyr

This herbicide is formulated as aqueous solution intending to control undesirable vegetation in forestry sites, aquatic sites, grass pasture, rangeland, fence rows, maintain wildlife openings, and industrial noncropland areas including railroad, utility, pipeline rights-of-way, utility plant sites, petroleum tank farms, pumping installations, storage areas, building perimeters, irrigation and non-irrigation ditch banks, roads, transmission lines, and industrial bare ground areas.

Active ingredient: 52.6% Isopropylamine salt of Imazapyr Reference Brand: Imazapyr 4 SL

1.2.6 Herbicide – Imazamox

This herbicide Is formulated for selective management of undesirable vegetation in and around aquatic sites and terrestrial non-crop areas, industrial sites and right-of-ways. It may be used on sites that are cut for hay or grazed. It is an Imidazolinone class herbicide to inhibit acetolactate synthase (ALS) enzyme, quick to act by absorption and translocation into foliage and/or roots, thus inhibiting plant growth.

Active ingredient: 12.1% Ammonium salt of Imazamox Reference Brand: IMOX

1.2.7 Herbicide – Penoxsulam

The product shall be formulated as a selective systemic aquatic herbicide for management of freshwater aquatic vegetation in: ponds, lakes, reservoirs, marshes, wetlands, bayous, drainage ditches, canals, and slow-moving or quiescent bodies of water, including shoreline and riparian areas within or adjacent to these and other aquatic sites.

Active ingredient: 21.7% Penoxsulam Reference Brand: Galleon SC

1.2.8 Herbicide – Penoxsulam

The herbicide is used for postemergence control of annual and perennial broadleaf weeds in established turfgrass, including residential lawns, golf courses, sports fields, sod farms and around commercial structures and other commercial turfgrass areas, and postemergence control of weeds in non-cropland sites.

Active ingredient: 3.68% Penoxsulam Reference Brand: Sapphire

1.2.9 Herbicide – Rimsulfuron

The product shall be formulated as a water soluble granule formulation that selectively controls certain broadleaf weeds and grasses in pome fruit, citrus fruit, tree nuts, stone fruit and grape crops which have been established for at least one full growing season. It also selectively controls certain broadleaf weeds and grasses in field corn (CA only), potatoes, potatoes grown for seed, and field grown tomatoes (direct seeded and transplant).

Active Ingredient: 25.0% Rimsulfuron Reference Brand: Matrix SG

1.2.10 Herbicide – Sulfometuron and Chlorsulfuron

The product shall be a mixture of two herbicides for control of many annual and perennial grasses and broadleaf weeds in non-crop sites. The product shall be dry formulation and be available in precision pack. The product must stay in suspension in cold weather.

Active ingredient: 50% Sulfometuron Methyl & 25% Chlorsulfuron Reference Brand: Landmark XP

1.2.11 Herbicide – Sulfosulfuron

The product shall be formulated as dispersible granules that control annual and perennial grasses, broadleaf weeds in forestry and non-crop areas, and selective weed control in certain types of unimproved turf grasses, and in forest site preparation and in the release of certain conifers and hardwoods.

Active Ingredient: 75% Sulfometuron-methyl Reference Brand: Oust XP

1.2.12 Herbicide – Sulfosulfuron

The product shall be formulated as a selective, systemic herbicide, formulated as a water dispersible granule (WDG) for control of many annual and perennial weeds in listed non-crop sites, pastures and rangeland, and for control of certain grasses and broadleaf weeds in winter and spring wheat.

Active Ingredient: 75.0% Sulfosulfuron Reference Brand: Outrider Group 3 – *Inhibition of Microtubule Assembly/*(Seedling) Root Growth Inhibitors

1.2.13 Herbicide – Dithiopyr

The product shall be formulated for control of crabgrass and other annual grasses and broadleaf weeds in established lawns, commercial sod farms, non-cropland and industrial sites, ornamental turf, container-grown ornamentals, field-grown ornamentals, and landscape ornamentals. It will not control established weeds; application shall be made preemergence.

Active Ingredient: 24% Dithiopyr Reference Brand: Dimension 2EW

1.2.14 Herbicide – Dithiopyr

The product shall be formulated for early post-emergent control of crabgrass and pre-emergent control of at least 40 grassy and broadleaf weeds in established lawns, noncropland, industrial sites, and ornamental turf. The product shall be available in 5 oz. soluble bags.

Active Ingredient: 40% Dithiopyr Reference Brand: Dimension Ultra 40WP

1.2.15 Herbicide – Oryzalin

The product shall be formulated as a selective preemergence surface applied herbicide for control of annual grasses and many broadleaf weeds in Landscape ornamentals, drainage areas, non-cropland and industrial sites, etc.

Active ingredient: 40.4% Oryzalin Reference Brand: Surflan A.S. Specialty

1.2.16 Herbicide – Pendimethalin

The product shall be formulated as a pre-emergent weed control herbicide in turfgrasses, landscape. It shall be water-based formulation in an ultra-thin capsule.

Active ingredient: 38.7% Pendimethalin Reference Brand: Pendulum AquaCap

1.2.17 Herbicide – Prodiamine

The product shall be formulated for pre-emergent control of grass and broadleaf weeds in non-crop areas.

Active ingredient: 65.0% Prodiamine Reference Brand: ProClipse 65 WDG Group 4 – *Auxin Mimics/*Plant Growth Regulators

1.2.18 Herbicide – Aminopyralid

The product shall be formulated to control susceptible broadleaf weeds including invasive and noxious weeds in non-crop land areas, such as roadsides, irrigation ditch banks, and natural areas such as campgrounds, trailheads, etc.

Active ingredient: 40.6% Aminopyralid Triisopropanolamine Salt Reference Brand: Milestone

1.2.19 Herbicide – Clopyralid

The product shall be formulated for postemergence control of broadleaf weeds and woody brush species in forest sites, right-of-way and certain ornamental plantings such as non-leguminous woody species or ornamental grasses in landscapes.

Active ingredient: 40.9% Clopyralid Monoethanolamine salt Reference Brand: Transline

1.2.20 Herbicide – Fluroxypyr 1-methylheptyl ester

The product shall be formulated for control of broadleaf annual and perennial weeds, and certain woody plants and vines on grass pastures, conifer plantations, ditches, industrial sites, natural areas, established turfgrass, and grazed areas.

Active ingredient: 45.52% fluroxypyr 1-methylheptyl ester Reference Brand: Vista XRT

1.2.21 Herbicide – Triclopyr

The product shall be formulated for herbaceous broadleaf weeds and woody plants in non-crop areas including industrial sites, rights-of-way (roadsides, electric utility and communication transmission and distribution lines, pipelines and railroads) and natural areas.

Active ingredient: 16.22% Triclopyr Triethylamine Salt and 2.22% Aminopyralid Triisopropanolamine Salt Reference Brand: Capstone

1.2.22 Herbicide – Triclopyr

The product shall be formulated for the control woody or herbaceous broadleaf plants in non-crop areas including rights-of-way, storage sites, etc. The product shall be suitable for cut stump application.

Active ingredient: 60.45% Triclopyr, Butoxyethyl Ester Reference Brand: Garlon 4 Ultra

1.2.23 Herbicide – Triclopyr

The product shall be ready to use formulation for woody plants in non-crop areas including rights-of-way, storage sites, etc. The product shall be suitable for cut stump application.

Active ingredient: 13.6% Triclopyr, Butoxyethyl Ester Reference Brand: Pathfinder II

1.2.24 Herbicide – Triclopyr

The product shall be used for control of woody plants and broadleaf weeds in range and pasture, grasses grown for hay, forest sites, conifer and tree plantations, non-crop areas.

Active ingredient: 54.72% Triclopyr choline Reference Brand: Vastlan

1.2.25 Herbicide – 2.4-Dichlorophenoxyacetic acid, dimethylamine salt The product shall be used for control of many broadleaf weeds in Asparagus, cereal grains, corn, cranberry, fallowland and crop stubble, orchard floor, rice, sorghum, soybeans, strawberries sugarcane, forests, in non-crop areas including lawns, ornamental turf, drainage ditch banks, fence rows, rights-of-way.

Active ingredient: 46.8% 2,4-Dichlorophenoxyacetic acid, dimethylamine salt Reference Brand: Weedar 64 Group 5 – *Inhibition of Photosynthesis at PSII – Serine 264 Binders/*Photosynthesis Inhibitors

1.2.26 Herbicide – Bromacil and Diuron

The product shall be formulated as a pre-emergent herbicide with post-emergent activity for use on crown roadways. This product must be effective for several annual/perennial weeds.

Active ingredient: 40% Bromacil and 40% Diuron Reference Brand: Krovar I DF

1.2.27 Herbicide – Tebuthiuron

The product shall be formulated as a surface applied; soil-active product intended for total vegetation control in non-cropland. Applied as a broadcast treatment, herbicide is generally non-selective to (will control) annual grasses, annual and perennial broadleaves and broadleaf woody plants. Applied as a banded treatment, the herbicide may be used to control woody plants in non-cropland sites.

Active ingredient: 80% Tebuthiuron Reference Brand: Spike 80 DF Group 9 – *Inhibition of Enolpyruvyl Shikimate Phosphate Synthase/*Amino Acid Synthesis/EPSP Synthetase Inhibitors

1.2.28 Herbicide – Glyphosate

The product shall be formulated as a postemergence, systemic herbicide for broad- spectrum control of many annual weeds, perennial weeds, woody brush and trees. It shall be formulated with surfactant. If surfactant is not in the formulation, the bid price must include the price of surfactant for use with this product.

Active ingredient: 50.2% Glyphosate, Dimethylamine salt Reference Brand: Accord XRT II

1.2.29 Herbicide – Glyphosate

The product shall be formulated as a postemergence, systemic herbicide for broad- spectrum control of many annual weeds, perennial weeds, woody brush and trees. It shall be formulated with surfactant. If surfactant is not in the formulation, the bid price must include the price of surfactant for use with this product.

Active ingredient: 73.3% Glyphosate, Isopropylamine salt and 2.9% Diquat Dibromide Reference Brand: Roundup QuikPro

1.2.30 Herbicide – Glyphosate (Wet Sites)

This shall be formulated as a post-emergent, non-selective herbicide for control of annual weeds, perennial weeds, woody brushes in and around aquatic sites. This product shall be registered in California for aquatic application. It must be suitable for cut stump, Injection and Frill application.

Active Ingredient: 53.8% of Glyphosate, Isopropylamine Salt Reference Brand: Rodeo

1.2.31 Herbicide – Glyphosate

The product shall be formulated as a water soluble liquid for aquatic and terrestrial use as a postemergence herbicide for broad-spectrum control of many annual weeds, perennial weeds, woody brush and trees.

Active ingredient: 53.8% Glyphosate, Isopropylamine salt Reference Brand: Roundup Custom

1.2.32 Herbicide – Glyphosate

The product shall be formulated as a postemergence, systemic herbicide for broad- spectrum control of many annual weeds, perennial weeds, woody brush and trees. It shall be formulated with surfactant. If surfactant is not in the formulation, the bid price must include the price of surfactant for use with this product.

Active ingredient: 50.2% Glyphosate, Isopropylamine salt Reference Brand: Roundup PRO Concentrate

1.2.33 Herbicide – Glyphosate

The product shall be formulated as a postemergence, systemic herbicide for broad- spectrum control of many annual weeds, perennial weeds, woody brush and trees. It shall be formulated with surfactant. If surfactant is not in the formulation, the bid price must include the price of surfactant for use with this product.

Active ingredient: 48.7% Glyphosate, Potassium salt Reference Brand: Roundup PROMAX Group 12 – *Inhibition of Phytoene Desaturase/*Pigment Synthesis Inhibitors

1.2.34 Herbicide – Fluridone *(Sonar® SRP)*

The product shall be formulated to control aquatic vegetation in water ponds, lakes, potable water sources. This shall be slow-release pellet formulation of Fluridone.

Active ingredient: 5.0% Fluridone Reference Brand: Sonar SRP

1.2.35 Herbicide – Fluridone *(Sonar® H4C)*

The product shall be formulated as selective herbicide to manage aquatic vegetation in freshwater ponds, lakes, reservoirs, drainage canals, irrigation canals and rivers. It is designed containing 2.7% Fluridone to provide enhanced numbers of pellets (greater coverage) in treated areas versus other Sonar pellet formulations at equivalent herbicide dosing.

Active ingredient: 2.7% Fluridone Reference Brand: Sonar H4C Group 14 – *Inhibition of Protoporphyrinogen Oxidase/*Cell Membrane Disruptors, Protoporphyrinogen oxidase (PPO) enzyme Inhibitors

1.2.36 Herbicide – Flumioxazin

The product shall be formulated as a selective herbicide to maintain bare ground non-crop areas. It shall be effective as a pre-emergent and post-emergent herbicide for control of selected grass and broadleaf weeds, recommended to apply directly to soil.

Active ingredient: 51.0% Flumioxazin Reference Brand: Payload (EPA: 59639-120-ZA)

1.2.37 Herbicide – Flumioxazin

The product shall be formulated as a fast-acting contact herbicide to control selected submerged, emergent and floating aquatic weeds and algae, not recommended to apply to soil.

Active ingredient: 51.0% Flumioxazin Reference Brand: Clipper (EPA: 59639-161-AA)

1.2.38 Herbicide – Oxyfluorfen

The product shall be used to offer preemergence and early postemergence control of broadleaf and grass weeds and annual grasses, as well as certain woody brush seedlings.

Active ingredient: 40.31% Oxyfluorfen, 0.85% Penoxsulam Reference Brand: Cleantraxx

1.2.39 Herbicide – Oxyfluorfen

The product described in this line item shall be used as an herbicide to suppress and control the vegetative growth of various plant species including broadleaf weeds (annual, perennial and biennial) and grasses (annual, perennial and biennial). The chemical formulation shall be emulsifiable concentrate.

Active ingredient: 22.3% Oxyfluorfen Reference Brand: Goal 2XL

1.2.40 Herbicide – Oxyfluorfen

The product shall be formulated as a pre-emergent herbicide for use in non-landscaped areas. The product shall be effective for marestail and horseweed. The product shall be virtually odorless and shall provide total efficacy in one application.

Active ingredient: 41.0% Oxyfluorfen Reference Brand: GoalTender

1.2.41 Herbicide – Oxyfluorfen

The product shall be formulated as a selective herbicide for preemergence and postemergence residual weed control of certain broadleaf and grass weeds in tree crops from early fall to late winter or in early spring, prior to germination of targeted weeds. The best weed control is obtained by application when weeds are small and actively growing.

Active ingredient: 40.31% Oxyfluorfen, 0.85% Penoxsulam Reference Brand: Pindar GT

1.2.42 Herbicide – Sulfentrazone

The product shall be formulated as a selective soil applied herbicide for the control of certain broadleaf weeds, grasses and sedges. It is for use in railroad, highway, roadside, pipeline and utility rights-of-way, industrial areas, fence rows, and other non-crop sites. It is formulated as flowable (suspension concentrate) containing four pounds of the active ingredient sulfentrazone per gallon.

Active ingredient: 39.6% Sulfentrazone Reference Brand: Portfolio 4F CA Group 29 – *Inhibition of Cellulose Synthesis/*Cell Membrane Disruptor, Cellulose wall synthase Inhibitor

1.2.43 Herbicide – Isoxaben

Gallery 75 Dry Flowable (DF) shall be formulated as a preemergence herbicide for control of broadleaf weeds in established turfgrass, landscape ornamentals, container grown ornamentals, field grown ornamentals, bulbs, groundcovers/perennials, non-bearing fruit and nut trees, conifer plantations and non-cropland areas, etc.

Active ingredient: 75.0% Isoxaben Reference Brand: Gallery 75DF

1.2.44 Herbicide – Isoxaben

The product shall be formulated as a preemergence suspension herbicide for control of certain broadleaf weeds by broadcasting in established turfgrass, landscape ornamentals, container grown ornamentals, field grown ornamentals, groundcovers/perennials, ornamental bulbs, non-bearing fruit and nut trees and non-bearing vineyards, Christmas tree/conifer plantations and non-cropland areas, airports, dry non-irrigation ditch banks, and dry storm water retention areas, utility rights-of-way, industrial sites, military sites, parking lots, roadsides, storage areas, vacant lots and other non-crop residential areas.

Active ingredient: 45.45% Isoxaben Reference Brand: Gallery SC Group 22 – *PS I Electron Diversion/*Cell Membrane Disruptors, Photosynthesis Inhibitors – Photosystem I (PSI) Inhibitors

1.2.45 Herbicide – Diquat dibromide

The product shall be formulated to suppress and control the aquatic and industrial vegetative growth of various plant species including algae, floating, submerged and marginal aquatic weeds, broadleaf weeds and grasses, ideal for non-selective weed control and burn-down in turf and landscapes including as a trim and edge tool.

Active ingredient: 37.3% Diquat dibromide Reference Brand: Reward Landscape and Aquatic (EPA: 100-1091-ZB)

1.2.46 Herbicide – Diquat dibromide

The product shall be formulated to suppress and control the aquatic and industrial vegetative growth of various plant species including algae that desiccates plant tissue on contact, broadleaf weeds and grasses. It is used as a general herbicide to control weeds in commercial greenhouses and nurseries; ornamental seed crops (flowers, bulbs, etc. - except in California); landscape, industrial, recreational, commercial, residential, and public areas; turf renovation; dormant established turfgrass; and aquatic areas.

Active ingredient: 37.3%, Diquat dibromide Reference Brand: Tribune

1.2.47 Herbicide – Contact-PHS-Membrane Disruptor – Copper

The product shall be chelated copper formulated for use in slow moving or quiescent bodies of water including lakes, golf course ponds, potable water reservoirs, fish hatcheries for control of aquatic weeds such as Hydrilla, Egeria, Southern Naiads, and other species having a sensitivity to copper absorption.

Active ingredient: 24.0% Copper Ethylenediamine complex Reference Brand: Harpoon Aquatic

1.2.48 Herbicide – Non-Classified, Multi Modes of Action – Endothall The product shall be formulated to control aquatic plants in still, slow moving, and flowing aquatic sites. This product shall be effective against a broad range of aquatic plants.

Active ingredient: 40.3% Endothall, Dipotassium salt Reference Brand: Aquathol K

1.2.49 Herbicide – Non-Classified, Multi Modes of Action – Bromicil The product shall be formulated to be mixed in water and applied as a spray for weed control in non-crop and industrial sites. It is an effective general herbicide providing residual control of many annual weeds at low rates and perennial weeds and brush at higher rates.

Active ingredient: 21.9% Lithium salt of Bromicil Reference Brand: Hyvar XL

1.2.50 Herbicide – Non-Classified, Multi Modes of Action – Copper ethyl The product shall be formulated to control many submersed and floating aquatic plant species including hydrilla, Brazilian elodea, coontail, elodea, water lettuce, water fern, duckweed, water hyacinth, and other submersed and floating aquatic weed species that are sensitive to copper.

Active ingredient: 50% Copper Ethylenediamine complex Reference Brand: Komeen Crystal

1.2.51 Insecticide – Pyrethroids – Cyfluthrin

The product shall be formulated to control insects indoors and outdoors, it shall have a broad spectrum label including spiders, ants, boxelder bugs, mosquitoes, bees, cockroaches, crickets, fleas, flies, bed bugs, silverfish, ticks, wasps, wood infesting borers and more.

Active ingredient: 6.00% Cyfluthrin Reference Brand: CY-Kick CS

1.2.52 Insecticide – Pyrethroids – Cypermethrin

The product shall be formulated to control insects indoors and outdoors, including lawns and landscape, it shall have a broad spectrum label including termites, spiders, ants, boxelder bugs, mosquitoes, bees, cockroaches, crickets, fleas, flies, bed bugs, silverfish, ticks, wasps, wood infesting borers and more.

Active ingredient: 25.3% Cypermethrin Reference Brand: Demon Max

1.2.53 Insecticide – Imidacloprid

The product shall be formulated for foliar and systemic insect control in turfgrass, fruit and nut trees, and interior plantscapes on soil, sod farms, and ornamentals on such sites: residential home, lawns, business and office complexes, shopping complexes, golf courses, airports, parks and athletic fields.

Active ingredient: 21.4% Imidacloprid Reference Brand: Merit 2F

1.2.54 Insecticide – Imidacloprid

The product shall be formulated to control of soil inhabiting pests of turfgrass, Asiatic garden beetles, Green June beetle, Billbugs, bluegrass weevil, European Crane Fly Tipula, and mole crickets and suppression of cutworms and chinchbugs.

Active ingredient: 75% Imidacloprid Reference Brand: Merit 75 WSP

1.2.55 Termicide/Insecticide – Pyrethroid – Permethrin

The product shall be formulated to control insect pests on lawns, ornamental trees, shrubs, and around buildings.

Active ingredient: 36.8% Permethrin Reference Brand: Tengard SFR

1.2.56 Pesticide – Anticoagulant Rodenticide – Diphacinone

The product shall be formulated to control California Ground Squirrels (Spermophilus beecheyi) and Townsend Ground Squirrels (Spermophilus townsend) around buildings, yards and flower gardens by applying directly to soil, no broadcasting allowed.

Active ingredient: 0.005% Diphacinone 2-diphenylacetyl-1, 3-indandione Reference Brand: Ground Squirrel Bait

1.2.57 Pesticide – Rodent Bait – Diphacinone

The product shall be formulated to control California Ground Squirrels (Spermophilus beecheyi), Deer Mice and House Mice in rodent infested areas.

Active ingredient: 0.01% Diphacinone Reference Brand: Rodent Bait Diphacinone Treated Grain (EPA: 10965-50003)

1.2.58 Activator adjuvant – Non – Ionic Surfactant

The product shall be formulated as a low-foaming, non-ionic type spreader adjuvant to provide quick wetting, more uniform distribution, and increases retention of spray by reducing surface tension of the spray droplets. It shall be a water soluble adjuvant for applications as an interfacing agent for wettable powders.

Active ingredients: 90% Alkyl phenol ethoxylate, alcohol ethoxylate and Tall Oil Fatty acid Reference Brand: Activator 90

1.2.59 Activator adjuvant – Oils

The product shall be specially formulated as a non-ionic blend of surfactants and is designed to be used with a wide variety of pesticides where an oil concentrate adjuvant is recommended.

Active ingredients: 99.0% Heavy range paraffinic oil, polyol fatty acid esters, polyethoxylated derivatives Reference Brand: Agri-Dex

1.2.60 Adjuvant – Pinene

The product shall be spreader sticker adjuvant with non-ionic properties designed to improve the contact, wetting and adhesion of pesticides onto the plant surface. The product forms a soft film, which polymerizes protecting spray, deposits from rainfall erosion, volatility and ultraviolet (UV) degradation.

Active ingredient: 100% Pinene (terpene) Polymers Reference Brand: Attach

1.2.61 Activator adjuvant – Oils

The product shall be specially formulated as a modified vegetable oil containing a non- ionic emulsifier system, which can be used as an additive with aquatically labeled pesticides.

Active ingredients: 98% Ethyl Oleate, Sorbitan Alkylpolyethoxylate Ester, Dialkyl Polyoxyethylene Glycol Reference Brand: Competitor Modified Vegetable Oil

1.2.62 Adjuvant – Paraffin Oil

The product shall be a low viscosity multi-purpose oil carrier system designed for application of low volume-basal herbicide applications. When mixed with herbicides labeled for cut-stump, basal bark, dormant stem and other such applications, the EP Base Oil Plus penetrates woody plants, stems, and other foliage to prescriptively deliver a plant-lethal dose of herbicide.

Active ingredient: 100% Paraffin oil, alcohol ethoxylate Reference Brand: EP Base Oil Plus

1.2.63 Activator adjuvant – Oils

The product shall be specially formulated as a non-ionic blend of special surfactant and a highly refined spray mineral oil, which can be used to improve pesticide application by modifying the wetting and deposition characteristics of the spray solution resulting in a more even and uniform spray deposit.

Active ingredients: 85%, Mineral oil, 15% Polyoxyalkylene Sorbitan Fatty Acid Esters Reference Brand: Grounded W

1.2.64 Activator adjuvant – Oils

The product shall be specially formulated as a modified vegetable oil containing a non- ionic emulsifier system, which can be used as an additive with aquatically labeled pesticides. Hasten-EA is a formulated modified vegetable oil created as a surfactant concentrate providing excellent wetting characteristics.

Active ingredients: 100%, Ethylated seed oil, Polyoxyalkylene Fatty Ester Reference Brand: Hasten EA Modified Vegetable Oil

1.2.65 Activator adjuvant – Hydroxy Carboxylic Acid, Phosphoric Acids and Ammonium Salt The product shall be formulated as a water conditioning agent designed to enhance pesticide performance by modifying factors such as pH and hardness of the spray water, additionally it will contain ammoniacal nitrogen along with the buffers, sequestrants and chelating agents to enhance an effective uptake of pesticides.

Active ingredient: 48.76%, Hydroxy Carboxylic Acid, Phosphoric Acids and Ammonium Sulfate and 1% - 2%, Polyacrylic acid Reference Brand: Quest

1.2.66 Activator adjuvant – Non – Ionic Surfactant

The product shall be formulated to provide optimum wetting and spreading (by reducing surface tension) of herbicide by spread over the waxy cuticle of a leaf or to penetrate through the small hairs present on leaf surface, insecticides, miticides, fungicides, herbicides and growth regulating hormones. The product shall be formulated for applications on agricultural, forestry, turf and ornamental, industrial, structural and non-cropland sites.

Active ingredients: 90%, Alkyl phenol ethoxylate, Isopropanol and Fatty acids Reference Brand: R-11 Spreader Activator

1.2.67 Adjuvant – Polyvinyl Polymer

The product shall be formulated as a deposition aid drift control agent, an effective, easy-to-use adjuvant for deposition improvement and drift retardation in spraying operation.

Active ingredient: 1% Polyvinyl Polymer Reference Brand: Reign

1.2.68 Activator adjuvant – Herbicide Activator and Water Conditioner The product shall be specially blended surfactants and water conditioning agents designed for use with a broad range of herbicides, effective with herbicide products based on glyphosate.

Active ingredients: 56.4% Trihydroxy carboxylic acid, alkyl amine alkoxylate, alkyl alkoxylated phosphate amine, urea sulfuric acid complex Reference Brand: Smoke

1.2.69 Dye – Colorant

The product shall be formulated non-staining, non-hazardous, 100% non-ionic polymeric water-soluble colorant designed to be used with pesticide.

Active ingredient: proprietary Reference Brand: Blazon Blue

1.2.70 Dye – Colorant

The product shall be formulated as non-staining aqueous mixture designed to be used with pesticide as a spray pattern indicator.

Active ingredient: temporary colorant Reference Brand: Hi-Light Blue

1.2.71 Dye – Colorant

The product shall be formulated as a non-staining, non-toxic colorant compatible with water soluble solution designed to be used with pesticide and for both agricultural and non-crop uses.

Active ingredient: Triphenylmethane blue dye, aqueous solution Reference Brand: Mark-It Blue

1.2.72 Dye – Green Marker Dye

The product shall be formulated as non-staining, non-toxic dye designed to be used with water-soluble pesticide.

Active ingredient: proprietary Reference Brand: none

1.2.73 Herbicide – Aminocyclopyrachlor, Potassium salt

The product shall be formulated to apply to soil or inject as a concentrate liquid to control annual and perennial broadleaf weeds.

Active ingredient: 25.00% Aminocyclopyrachlor, potassium salt Reference Brand: Method 240SL

1.2.74 Herbicide – Indaziflam

The product shall be formulated as emulsifiable concentrate to apply or spray for control of annual, biennial and perennial broadleaf weeds and grasses.

Active ingredient: 19.05% Indaziflam Reference Brand: Esplanade 200 SL

1.2.75 *Herbicide – Fluridone (Sonar® PR) The product shall be formulated as Aquatic herbicide known for precision release in pellet form containing 5% Fluridone as active ingredient to mange aquatic vegetation in freshwater ponds, lakes, reservoirs, drainage cancels, irrigation canals and rivers.

Active ingredient: 5.0% Fluridone Reference Brand: Sonar® PR (EPA : 67690-12)*

1.2.76 *Herbicide – Fluridone (Sonar® Q) The product shall be formulated as Aquatic herbicide known for quick release allowing more accurate placement and targeted contact with undesired plants in pellet form containing 5% Fluridone as active ingredient to mange aquatic vegetation in freshwater ponds, lakes, reservoirs, drainage cancels, irrigation canals and rivers.

Active ingredient: 5.0% Fluridone Reference Brand: Sonar® Q (EPA: 67690-3)*

1.2.77 *Herbicide – Fluridone (Sonar® ONE) The product shall be formulated as Aquatic herbicide known for quick initial release with sustained dose afterward, in pellet form containing 5% Fluridone as active ingredient to mange aquatic vegetation in freshwater ponds, lakes, reservoirs, drainage cancels, irrigation canals and rivers.

Active ingredient: 5.0% Fluridone Reference Brand: Sonar® ONE (EPA: 67690-4)*

*Reference: 2024 HRAC Global Herbicide MOA Classification https://hracglobal.com/tools/2024-hrac-global-herbicide-moa-classification*

image1.emf