Statement of Work-RFQ.pdf

PDF 23 KB Posted

Attached to
Mechanical Shock Class
Solicitation number
N0017822Q6903
Issued by

View the file

Other files

File Type Posted
SF18 - N0017822Q6903.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MECHANICAL SHOCK TRAINING

STATEMENT OF WORK

1.0 INTRODUCTION

Naval Surface Warfare Center, Dahlgren Division (NSWCDD), has a requirement for Mechanical Shock training. The objective of the training is to provide 10 students the materials and knowledge to understand mechanical shock, methods to evaluate shock events, and testing techniques. The training should focus on the practical understanding of mechanical shock and the principles necessary to analyze and evaluate shock events along with a sufficient mathematical background to understand the basis of the analysis techniques used and their underlying theory. The course should present information of shock test types, test machines, test tolerances, test fixture design, and information and techniques used for comparing shock severity, understanding failure types, and designing for shock survivability.

2.0 APPLICABLE DOCUMENTS

MIL-STD-901E

3.0 REQUIREMENTS

The Contractor shall provide on-site, instructor-led Mechanical Shock training. The Contractor shall provide a 3-day training session. The session shall support 10 students. The Contractor shall provide training materials and supplies to support interactive training sessions.

3.1 The classes shall be held from 0800 through 1700 each day with an hour break for lunch.

3.2 The training shall address the following topics, at a minimum:

Introduction Mechanical Shock

Common Shock Environments

Single Degree-of-Freedom System Overview

Shock Response Spectrum

Shock Testing

Shock Test Specifications

Design for Shock

Temporal and Energy Methods

3.3 The Contractor shall include a question and answer period before the conclusion of each session for interactive collaboration.

3.4 The Contractor shall contact the technical point of contact no later than 5-days after award of order to confirm the training dates and location.

4.0 TRAVEL

The Contractor shall travel in performance of this contract. The number of trips and types of personnel traveling shall be limited to the minimum required to accomplish work requirements and shall be coordinated with the TPOC. All travel shall be conducted in accordance with the

Federal Travel Regulations (FTR). The following travel is anticipated: one (1) personnel for 4 days to Dahlgren, Virginia.

5.0 TECHNICAL POINT OF CONTACT

Provided upon award.

File details come from the government source that posted it. Updated .