STATEMENT OF WORK_OMAX Waterjet Upgrade-Renovation.pdf

STATEMENT OF WORK

(OMAX Waterjet Upgrade/Renovation)

ON

ANDERSEN AFB, GUAM

Table of Contents

1. DESCRIPTION OF SERVICES

1.1 REQUIREMENTS:

1.2 LIABILITY:

1.3 GOVERNMENT FURNISHED SERVICES: ......................... Error! Bookmark not defined.

2. GENERAL INFORMATION

2.1 HOURS OF OPERATION:

2.2 CONTRACTOR PERSONNEL:

1. DESCRIPTION OF SERVICES

1.1 REQUIREMENTS:

The Metals Technology Section requires an upgrade to the OMAX 55100 Waterjet System to support the 36 MXG’s mission and enhance precision cutting capabilities essential for sustaining aircraft, Aerospace Ground Equipment (AGE), and War Reserve Materiel (WRM). The current 4' × 6' cutting bed imposes significant material‑handling constraints, forcing technicians to manually resize raw stock to fit the machine. This increases fabrication time, material waste, and labor requirements. Expanding the cutting bed to 5' × 9' enables full‑sheet processing, eliminating manual resizing and streamlining the production of structural components, reinforcements, and mission‑critical parts required for operational readiness.

The waterjet system is a critical asset supporting maintenance operations for AGE, C‑130, C‑17, C‑5, F‑16, F‑15, B‑1, B‑52, RQ‑4, KC‑135, and KC‑10 aircraft at Andersen AFB and associated spoke locations. The upgraded configuration incorporates advanced filtration and water‑softening systems, which are essential for maintaining equipment longevity and performance in Guam’s corrosive industrial environment. The existing filtration capability is insufficient for long‑term reliability; the enhanced system reduces maintenance downtime, improves system life expectancy, and ensures uninterrupted mission support.

Upgrading the waterjet also improves workflow efficiency through high‑pressure cutting technology and automated processing features, reducing reliance on external machining sources and enabling technicians to fabricate essential components on‑site. These improvements directly support contingency preparedness for pacing O‑Plan requirements and ensure the Metals Technology Section can meet rapid‑response fabrication demands.

Machine Specifications

1. Expanded 5' x 9' Cutting Bed – Enables direct processing of full-sheet materials, eliminating manual resizing.

2. Abrasive Jet Cutting Technology – Ensures high-precision cutting for aerospace-grade components.

3. Advanced Filtration System – Enhances equipment longevity by reducing contaminants and minimizing wear.

4. Water Softening System – Prevents mineral buildup, optimizing long-term operational reliability.

5. Automated Cutting Controls – Programmable operations streamline workflow efficiency and reduce operator workload.

6. High-Pressure 60,000 PSI System – Supports rapid and accurate material processing with minimal waste.

7. 5.7” HMI Touchscreen – Provides real-time monitoring for operational diagnostics and performance adjustments.

8. Integrated Bulk Abrasive Delivery System – Reduces downtime by supporting continuous high-capacity cutting.

9. Smart NC-100 Programmable Technology – Stores multiple job setups for optimized cutting operations.

10. Factory-Backed Warranty and Support – Ensures reliability and mission readiness for sustainment operations. Additional packaging for overseas shipping protection

11. IUID tag plate per MIL-STD-130x for compliance tracking

12. Freight to Tracy, CA for delivery logistics

1.2 LIABILITY:

The contractor shall be liable for any damages resulting from any carelessness or failure to follow proper safety, installation, engineering, Shipping or maintenance procedures and standards. The contractor shall be required to complete any minor repairs within their liability within 60 days of the reported incident. If major repairs, or full replacement is required, the contractor will be responsible to provide a detailed servicing timeline that will be approved by the 36th Contracting Squadron and the Metals Technology Section Chief.

2. GENERAL INFORMATION

2.1 HOURS OF OPERATION:

The normal hours of operation for the project are from 0730 to 1630, Monday through Friday, excluding holidays, PACAF Family days and 36th wing Down Days.

2.2 CONTRACTOR PERSONNEL:

The contractor shall provide a point of contact (POC) for all contractual matters. Due to significantly differing time zones, it is not required that the POC be available during all hours of operation. However, The POC shall respond via email within 24 hours during normal duty hours of operation and within 48 hours during non-duty hours to discuss concerns with government personnel designated by the CO to discuss problem areas.