Statement of Work.docx

Statement of Work and Specifications

Purchase of New Zero Turn Mower for Saylorville Lake Project Office

Deliver to Saylorville Lake Admin and Maintenance Facility, 5600 NW 78th Ave, Johnston, IA 50131 Delivery FOB; within 180 days of contract award.

POC is John Benjamin at (515) 276-4656 x 6510

SCHEDULE OF PRICES

EA

EA

Total Amount of All Items (Items Nos. 0001 through 0003)

The Government reserves the right to award any or all items 0001 through 0003.

ZERO TURN MOWER SPECIFICATIONS – 72” EXMARK LAZER Z DIESEL ZERO TURN MOWER OR EQUAL

Zero turn mower specifications must include at a minimum the following. The specifications must be included with quote. If all specifications are not met, the quote shall be considered unacceptable.

The new and NOT used zero turn mower, must be brand name or equivalent to the specifications listed below.

List of minimum required equipment specifications and options for 72” eXmark Lazer Z Diesel or Equal:

· Maximum Operating weight 2,200 lbs

· Maximum width 85 inches

· Maximum length 108 inches

· 3 cylinder 1.3 liter turbo diesel engine with minimum 24 horsepower

· Welded heavy duty tubular steel frame

· Beltless hydro-drive infinitely variable speed transmission with twin wheel motors

· Hydraulically dampened twin levers adjust fore and aft, also adjustable to 2 height positions. Adjustable dampeners (3 Positions) to customize drive responsiveness

· Safety package with operator presence controls and drive system interlock with safety interlock indicators

· 2 post foldable Rollover Protection System (ROPS)

· Lever-actuated internal wet disc parking brake

· Flip up, elastomeric vibration control suspension seat with seat isolation and fore-aft slide adjustment

· Integrated wet clutch PTO engagement connected to right angle gearbox on cutting deck via drive shaft connected to transmission

· Manual drive wheel release without engine running

· 72 inch floating cutting deck with side discharge, molded discharge chute, and anti-scalp wheels

· 17,600 fpm blade tip speed

· Minimum 10-gauge top with formed and continuously seam welded 7-gauge side skirt and 7-gauge reinforced spindle mounting locations

· Adjustable cutting deck height from 1.0 inches to 5.5 inches accessible from operators seat

· Hydraulic deck lift

· Onboard control module with LCD display and multiple user selectable operating modes and menu screens for monitoring engine temperature, oil pressure, electrical system status, and clutch saver programming

· No maintenance sealed and non-greaseable spindles

· True zero turn turning radius

· 12-gallon side mounted fuel tanks

· Tool-less belt access

· Removable floor pan

· Hour meter

· Seat belt

· 12 volt accessory outlet

· 12 volt low-maintenance battery

· 55 amp alternator

· 1 Set Printed Operators Manual, Parts Manual, and Service Manual

· Minimum 3 keys

****Manufacturer authorized dealer repair service must be within a 20 mile radius of the Saylorville Lake Administration Facility (address below).

Saylorville Lake Administration Facility 5600 NW 78th Ave, Johnston, IA 50131

Bio-based The United States Department of Agriculture (USDA) designates certain biobased products for federal procurement and specifies minimum biobased content levels for those products. Any designated product that is being offered or supplied under this contract shall meet USDA BioPreferred’s minimum biobased content level. Visit the BioPreferred web site for the complete list of designated products and the associated minimum biobased content level requirements.