Square Fenders Drawing and Specifications.pdf
PDF 160 KB Posted
- Attached to
- Custom Rubber Marine Fenders
- Solicitation number
- 6923G520Q1045
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATIONS
1. FENDER REQUIREMENTS.
1.1. Materials. The fender materials shall meet or exceed the requirements specified in the Synopsis.
1.2. Fabrication. The fender elements shall be fabricated to the dimensions shown on Drawing No. SLS-370-200A. Holes shall be shop-drilled. Fabrication shall include twenty (20) bolt holes, two (2) lifting holes, two (2) corners with a 3/4” chamfer and two (2) milled that are 3/4” deep and 2 1/2” wide, as per the drawing. Fabrication shall also meet the tolerance requirements specified in the drawing. All pieces shall be handled, packaged and shipped in such a way as to prevent damage.
1.3. Quality Assurance.
1.3.1. Manufacturer Qualifications. The fender manufacturer shall demonstrate that they have been manufacturing molded rubber fenders for a minimum of five (5) years.
The manufacturer must provide evidence of a minimum of three (3) installations each having been in service for a minimum of three (3) years.
1.3.2. Warranty. The fender manufacturer shall provide a written warranty against failure of the fender due to defective materials or workmanship. The warranty period shall be at least sixty (60) days from delivery.
1.4. Submittals.
The fender manufacturer shall submit the following items for approval prior to manufacture:
Certified material properties.
Fender manufacturer qualifications, per paragraph 1.3.1.
Shop drawings for approval.
File details come from the government source that posted it. Updated .