Ltr_RFP-Pratt_18-00507-0001_FedBiz.pdf

DEFENSE LOGISTICS AGENCY

AVIATION AT OKLAHOMA CITY

3001 STAFF DRIVE SUITE 2B-95

TINKER AIR FORCE BASE, OKLAHOMA 73145-3015

25 September 2018

IN REPLY

REFER TO /AOAA

MEMORANDUM FOR PRATT & WHITNEY

400 MAIN STREET

EAST HARTFORD CT 06108-0969

SUBJECT: Letter Solicitation, SPRTA1-18-R-0507-0001

Subject solicitation amendment is issued for acquiring an increased quantity of supplies identified on page 2 of this letter. The original letter RFP for this item was issued on 20 Dec 2017.

Please provide your best price and delivery proposal for the required part number based on the best estimated quantities (BEQ) listed. Price and delivery proposals will be negotiated upon closing of this solicitation. Electronic submission (E-mail) of your proposal is preferred.

This correspondence constitutes a letter solicitation as these items are intended to be awarded as a firm fixed-price, fixed quantity order against the Pratt & Whitney Basic Ordering Agreement (BOA), SPE4A1-15-G-0006. Be advised, this requirement has been advertised in the Federal Business Opportunities (FedBizOpps) for viewing by the general public.

Please provide your proposal at your earliest convenience, but no later than 5 Oct 18. If you have any questions or need more information, please contact me at (405) 734-8126, or email alan.welch@us.af.mil.

ALAN WELCH

Contracting Officer F100, TF33 Engines Contracting Branch

The information listed below is in support of this requirement, SPRTA1-18-R-0507:

a) BEQ: 4,252 each (range 1-4295ea); however, a fixed quantity will be determined upon receipt of the contractor's proposal and before award

b) PRs: 18-00507

c) Cage Code: 52661

d) P/N: 780831

e) NSN: 2840-01-411-0982RV

f) Noun: Blade, 1st Stage Turbine

g) Item Unique Identification (IUID): DFARS 252.211.7003

h) Critical Safety Item (CSI): Yes

i) IUID Marking: (See atch’d)

j) Inspection/Acceptance: Origin

k) FOB: Origin

l) Quality Assurance: Higher level quality requirements; ISO 9001:2000 or higher

m) Progress Payments: Proposals >SAT ($150K) shall identify if progress payments are requested (IAW FAR 15.232-16 Alt III)

n) Requested Deliveries: Early and partial shipments are authorized

L/I 0001: BEQ 4252

SE / Delivery: 500 sets per month starting on/before 1 Dec 2020; Destn: SW3211

o) Ship To / Mark-For:

L/I 0001: SW3211, Tinker AFB OK

p) Attachments:

1) Packaging Requirements; AFMC 158, 17 Sep 2018, 1 pg

2) Transportation Data; DD 1653, 17 Sep 2018, 1 pg

3) IUID Checklist; 24 Nov 2015, 1 pg

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

2840014110982RV

VERSION NUMBER

NOUN

BLADE SET,COMPRESSO

INITIATOR

Babb, Michael L

ORGANIZATION CODE / OFFICE SYMBOL

AFLCMC / LPSEA3

COMMERCIAL PHONE

405-734-8699

DSN PHONE

884-8699

CAGE / REFERENCE NUMBER

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Bag/Tag

MARKING METHOD

BAG/TAG

DESCRIPTION / LOCATION

Bag/tag this item.

REMARKS

Babb, Michael LNAME: 24 NOV 2015DATE:

Bag/tag

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2840014110982RV

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 09 Nov 2017

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20301800507-01 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL Long Line Packaging MIL B

ITEM(S):

2840014110982RV

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

LENGTH

WIDTH

DEPTH

CUBE OPI

1 AAA 10 1 00 EA ZZ A NS ED B 17 1.20 6.3 5.3 3.0 0.057 M

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

TWO INTERIOR FOAM CAVITIES TO PROTECT /SEPERATE BLADE SET

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Villarma, Gary D

PHONE NUMBER:

405-582-9771 / 852-9771

SIGNATURE:

//SIGNED//Villarma, Gary D

DATE:

18260 - 17 SEP 2018

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 21 Sep 2018

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20301800507-01

DATE INITIATED:

17 SEP 2018

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 Freight Classification Description 52.247-53 Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW Basic Contract FD20301800507-01

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 648 47GT 15999E 01N000 00000 000000 503000 F03000 FSR: 013352 PSR: K15281 DSR: 139685 CIN:

F3YCAB8249B004

First Destination Transportation Account Code: FRS2

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 2840014110982RV

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): SW3211

Mark For: acct 09

Ship To (Address): DLA DISTRIBUTION DEPOT OKLAHOMA

TINKER AFB OK 73145-8000

73145 - 8000

USA

WPOD:

APOD:

BBP / CCP:

RIC: 1

Requisition Number:

Supplemental Address:

FMS Case:

3301 F AVE CEN REC BLDG 506 DR 22

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

NAME

Little, Phillip D

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-6350 / 497-6350

SIGNATURE

//SIGNED//Little, Phillip D

DATE

17 SEP 2018

Page 1 of 1DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 21 Sep 2018