SPRRA223C0010-P00001 -- 2 JUNE 2023.pdf

6/2/2023

Melissa Hays, Sr. VP of Business Operations/CFO

KIRK.JUSTINE.R.1386257090 Digitally signed by KIRK.JUSTINE.R.1386257090 Date: 2023.06.02 09:18:35 -05'00'

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

P00001 2023JUN02

SPRRA2

DEFENSE LOGISTICS AGENCY

5201 MARTIN ROAD/DLA-AVN-AH

REDSTONE ARSENAL AL 35898-7340

MICHAEL L. ELLISON

EMAIL: MICHAEL.ELLISON@DLA.MIL

S0107A

DCMA HUNTSVILLE

1040 RESEARCH BLVD, SUITE 100

MADISON AL 35758-2040

1MQC1

INTUITIVE RESEARCH AND TECHNOLOGY CORPORATION

5030 BRADFORD DR NW STE 205

HUNTSVILLE, AL 35805-1935

SPRRA2-23-C-0010

2023MAR31

NO CHANGE TO OBLIGATION DATA

X FAR 43.103(a)

X

SEE SECOND PAGE FOR DESCRIPTION

/SIGNED/ 2023JUN02

JUSTINE KIRK

JUSTINE.KIRK@DLA.MIL (256)690-5424

1 5

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: MICHAEL L. ELLISON

Buyer Office Symbol/Telephone Number: DLA-AVN-AHCA/(256)690-5751

Type of Contract 1: Firm Fixed Price

Kind of Contract: Research and Development Contracts

Kind of Modification: G

Type of Business: Other Small Business Performing in U.S.

Surveillance Criticality Designator: B

Weapon System: Hellfire

Paying Office: HQ0338

DFAS-COLUMBUS CENTER

SOUTH ENTITLEMENT OPERATIONS

P O BOX 182317

COLUMBUS OH 43218-2317

*** End of Narrative A0000 ***

THE PURPOSED OF MODIFICATION P00001 ON CONTRACT SPRRA2-23-C-0010 IS TO:

1) ATTACH THE UPDATED STATEMENT OF WORK (SOW)

2) CHANGE THE DELIVERY OF CLINS

0002AB - FROM: 1 JUNE 2023, TO: 30 JUNE 2023

0002AC - FROM: 1 JUNE 2023, TO: 19 JUNE 2023

0003AA - REMOVE 5 EACH PER MONTH STARTING 1 JULY 2023, TO ALL 25 DUE 30 NOVEMBER 2023

3) CDRL A001 - BLOCK 16 CHANGE DUE DATE TO "INITIAL TDP DELIVERY DUE WITH PROTOTYPE VEHICLE"

4) CDRL A002 - BLOCK F CHANGED FROM LOCKHEED MARTIN TO INTUITIVE

ALL OTHER TERMS AND CONDITIONS REMAIN IN EFFECT AND UNCHANGED.

*** END OF NARRATIVE A0002 ***

2 5

SPRRA2-23-C-0010

P00001

INTUITIVE RESEARCH AND TECHNOLOGY CORPORATION

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0002AB NRE 1 LO $ ** N/A ** $ 7,592,247.95 ___ ______________ __________________

COMMODITY NAME: ATI-D SENSOR SUITE S

CLIN CONTRACT TYPE:

Firm Fixed Price

PRON: Y03INS05Y0 PRON AMD: 01 ACRN: AA

AMS CD: 371359.H87

PSC: 5342

CUSTOMER ORDER NO: MIPR3EINS06002

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 W80E6J308903AT W81MTJ L 1

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 1 30-JUN-2023

FOB POINT: Destination

SHIP TO:

(W81MTJ) PR US ARMY REDSTONE TEST CENTER

BLDG 4500

MARTIN ROAD

REDSTONE ARSENAL,AL,35898-0000

0002AC NRE 1 LO $ ** N/A ** $ 545,242.57 ___ ______________ __________________

COMMODITY NAME: ATI-D PROTOTYPE

CLIN CONTRACT TYPE:

Firm Fixed Price

PRON: Y03INS06Y0 PRON AMD: 01 ACRN: AA

AMS CD: 371359.H87

PSC: 5342

CUSTOMER ORDER NO: MIPR3EINS06002

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

3 5

SPRRA2-23-C-0010

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 W80E6J308904AT W81MTJ L 1

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 1 19-JUN-2023

FOB POINT: Destination

SHIP TO:

(W81MTJ) PR US ARMY REDSTONE TEST CENTER

BLDG 4500

MARTIN ROAD

REDSTONE ARSENAL,AL,35898-0000

0003AA INSTALL OF FLIR/RADAR DENSOR SUITES & MOUNT OF ______________________________________________

MAST/NG/LN25 25 EA $ 1,118,275.971 $ 27,956,899.28 ____________ ______________ __________________

COMMODITY NAME: ATI-D LRIP

CLIN CONTRACT TYPE:

Firm Fixed Price

PRON: Y03INS03Y0 PRON AMD: 01 ACRN: AA

AMS CD: 371359.H87

PSC: 1095

CUSTOMER ORDER NO: MIPR3EINS06002

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 W80E6J308901AT W81MTJ L 1

DEL REL CD QUANTITY DEL DATE __________ ______________ ___________

001 25 30-NOV-2023

002 DELETED

003 DELETED

004 DELETED

005 DELETED

FOB POINT: Destination

SHIP TO:

(W81MTJ) PR US ARMY REDSTONE TEST CENTER

BLDG 4500

MARTIN ROAD

REDSTONE ARSENAL,AL,35898-0000

4 5

SPRRA2-23-C-0010

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Exhibit A BUILD TO AND LAYOUT DRAWINGS (CDRL)

Exhibit B TRAINING MATERIALS (CDRL)

Attachment 0001 STATEMENT OF WORK (SOW)

5 5

SPRRA2-23-C-0010

DRAFT Statement of Work

Advanced Technology Integration – Detroit (ATI-D) for

PEO Missiles and Space

Tactical Aviation and Ground Munition

Advanced Technology Integration Program Office

SPRRA2-23-R-0041

Date – 26 May 2023

1.0 Introduction

The Tactical Air and Ground Munitions (TAGM) Project Office has received an urgent request related to National Security to develop a mobile weapon system capable of rapid deployment to increase lethality in ground, air, and sea threat engagements. The requirement is for a fully autonomous system containing all power, fire control, and sensors needed to shoot current Army Air-to-Ground Missiles (AGMs) family of missiles that is capable of operation in a GPS degraded environment and incorporates an EO/IR sensor, tactical laser designator, and radar. The system must be able to carry weapons loaded while on the move and capable of putting metal on target within 6 minutes of target recognition. System must be able to relocate positions after weapon deployment within 3 minutes. System must be able to go complete blackout and have complete IR inside and out on command and capable of sending out IR strobe for friendly or foe recognition.

This requirement is for the development and integration of a low rate initial production (LRIP) of 26 prototype “sensor suites”. This requirement involves production of the hardware prototype, non-recurring engineering (NRE) and integration to incorporate the 26 sensor suites and 10 GFE’d weapons kits into a Government Furnished vehicle. Due to national security reasons, this sensor suite LRIP is required to be delivered and integrated in an extremely compressed delivery schedule. Deliveries are required beginning in June of 2023, at a rate of at least 5 each per month, with all 26 units required for final delivery by 30 November 2023.

2.0 Requirements

2.1 Task 1 (CLINs 0001 & 0002): Non-Recurring Engineering (NRE) and purchase of materials associated with designing and developing Sensor Suites. NRE will consist of the development, design and integration. The design and development of the Sensor Suites are detailed in SOW attachment 1 (excel spreadsheet) to this document specifying the mounting and installing of all 6 components of the Sensor Suite, listed at task 1. The Government has unlimited rights to all documents/material produced under this task and contract.

1. Contractor shall produce design to mechanically attach sensor payloads (FLIR SAFIRE 380-HLD and R20SS-3D-XR) to mast (711990290 Will-Burt Stiletto AL .9-2.8M).

1. Contractor shall produce design to mechanically attach mast, containing the FLIR and Radar payloads, to Government Furnished Equipment (GFE)’d vehicle(s) of the same type and will be delivered June 2023, prior to start of production.

1. Contractor shall design weather proof opening in roof of GFE’d vehicle(s) for extension of mast. Contractor will design and develop the location of the mast within the GFE vehicle and the Government will review/sign off on prior installation.

1. Contractor shall provide integration of sensor track data to fire control via Ethernet, and 28v power to sensor suite.

1. Contractor shall provide integration of vehicle positional data to fire control from INS via ethernet.

1. Contractor shall provide mechanical design to attach IMU to radar pan tilt.

1. Contractor shall provide monthly delivery schedule and expenditure reports of material.

1. Contractor shall purchase all of the following materials (as seen in attachment 1):

Item

Part Number

QTY

Task 1/CLIN 0001: NRE & Up Front Materials

FLIR

Star SAFIRE 380-HLD

Cables

QTY Pending Design Approval

Radar

R20SS-3D-XR

Masts

71990290

NG LN251

Honeywell 1930 IMUs

HG1930 or HG1930, or HG4930 is also an acceptable alternative

MoComp LRUs

ST4544

Weapons Interface Wiring Harness

Harness Validity Tester

Data Distribution Units

Sensor Kit NRE & Prototype

Sensor Kit Materials

Metal Storage Install

Engineering Support for Sensor Integration, Testing, Data Analysis

Theodolites

INS SME

LN251

0.5

*All material above will be purchased. Items are commercial off the shelf (COTS) parts. Some have part numbers, some do not. Once material is invoiced and paid for, it will be retained as Government Furnished Material (GFM) and owned solely by the United States Government. The above listed material has recognized COTS licensing agreements.

2.2 Task 2 (CLIN 0003): Low Rate Initial Production (LRIP), Development and integration (installation and mounting) of 26 sensor suites and 10 GFE weapons kits onto GFE’d vehicle containing missile launcher and power system. The Government has unlimited rights to all development and integration produced under this task and contract.

1. Contractor shall report high and medium program risk at weekly program reviews with TAGM and/or DLA. Weekly reviews will be conducted via TEAMS or at rotational location (Redstone/Huntsville) based on mission need.

1. Contractor shall attend in person meetings every 3 weeks at a rotational location of Redstone Arsenal and/or Orlando as needed until program design and First Prototype build is complete/approved/finalized. Travel to Orlando and Nashville are relative to the prototype build because these are the locations for the tests of the radar/FLIR after installation into the GFE’d vehicle.

1. Contractor shall conduct testing at Government furnished facility (Redstone Arsenal) with system to provide sensor suite accuracy performance against land, air, and sea threats, as part of the prototype build (listed in attachment 1 of this document, specified in task 2).

1. Contractor shall produce 26 sensor suites, to include, but not limited to, EO/IR sensor, radar, mast, hatch, and master INS units.

1. Contractor shall conduct installation and mounting of 26 sensor suites onto 26 separate GFE’d vehicle(s).

1. The government will furnish 10 vehicle kits that are needed in the install of the sensor suites. The government will provide 10 each vehicle kits as GFE to be installed into 10 GFE vehicles. The government will install the other 16 each vehicle kits into the other 16 vehicles. If the contractor completes their install faster than the government, the government may modify the contract to increase the GFE quantity and install quantities.

1. Contractor shall design sensor suite layout for the system and develop system drawings to be delivered at Prototype.

1. Contractor shall take all measurements required for offsets between launcher, master INS, GPS antennas during system installs against system drawings.

1. Contractor shall develop and deliver build to instructions for the mounting location and mounting hardware for the sensor suite. (CDRL)

1. Contractor shall perform final integration of complete system. Government will provide the software as GFI to be tested.

1. Contractor shall lead and participate in final system testing of all 26 system units.

1. Contractor shall support up to 3 missile firing events at TBD location.

1. Contractor shall support and identify anomalies from the 6 Degree Of Freedom (DOF) simulation runs, developed by the Government, of all target scenarios for the predicted test firings.

1. Contractor shall support 2 user trainings at Redstone Arsenal (not to exceed 3 days) to identify training material and user guide information/completeness.

1. Contractor shall support 2 design reviews to be held at Redstone Arsenal.

1. Contractor shall produce training materials and user guide. Government will review and provide feedback as necessary and provide acceptance. (CDRL B001, EXHIBIT B)

1. Contractor shall provide monthly schedule report.

1. Contractor shall complete all installs and system testing of all 26 sensor suites and 10 GFE’d weapons kits by November 30, 2023, with initial sensor suite installs starting in June at a rate of 5 each per month.

2.3 Technical Data Package

The contractor shall deliver all drawings up to Level 2, including all documentation up to “build to” instructions for all parts of the design and installation (CDRL A001, EXHIBIT A), CLIN 0004 A001 of this contract. The government will have unlimited rights to all technical data/material developed/produced/purchased under this contract.

3.0 Quality

The contractor shall follow commercial best practices for quality systems, procedures, and planning.

4.0 Environmental

All contractor and subcontractor activities shall be in compliance with applicable federal, state and local environmental laws and regulations.

5.0 Government Furnished Property

The contractor shall notify the Government of any issues encountered with the GFP that might affect performance, reliability, form-fit-function, or any other adverse conditions. Government furnished property list is included in Attachment 0002.

7.0 Deliverables

The contractor shall deliver hardware, data, drawings, and training materials in accordance with this SOW and CDRLs.

8.0 Contract Management

The contractor shall designate a Project Manager who shall be responsible for the control and coordination of all work performed on this contract. The contractor shall monitor performance and cost of this delivery order IAW the applicable clauses of the contract.

9.0 Meetings and Reviews

The contractor shall participate in periodic progress meetings/reviews with the Government.

Meetings shall be held at least once monthly and may be conducted via teleconference or in person, to review progress, coordinate access for restricted areas, analyze testing data, etc. In addition, an occasional in person meeting may be required if restricted information is to be discussed.

The contractor shall be contacted by the Government Technical Project Manager to establish conference dates. If multiple phases are conducted at the same time, Meetings and Review requirements may be able to be combined to discuss multiple phases in a single meeting.

10.0 Place of Performance

Work will be performed at the contractor’s facility. Integration and testing shall take place at

Government facilities located on Redstone Arsenal. Contractor will have full access to facilities at any required time during the performance period of the contract.

11.0 Data Rights

The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer (CO). All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

12.0 Warranty

The contractor shall provide all commercial workmanship warrantees. The contractor shall provide the information required by the attachment entitled “Warranty Tracking Information” on each contract line item number, subline item number, or exhibit line item number for warranted items. Information required in the warranty attachment for each warranted item shall include such information as duration, fixed expiration, item type, starting event, usage, warranty administrator enterprise identifier, and warranty guarantor enterprise identifier.

The contractor shall provide the following information no later than when the warranted items are presented for receipt and/or acceptance:

A. The unique item identifier for each warranted item required by the attachment entitled “Warranty Tracking Information;” and

B. All information required by the attachment entitled “Source of Repair Instructions” for each warranted item.

For additional information on warranty attachments, see the “Warranty and Source of Repair” training and “Warranty and Source of Repair Tracking User Guide” accessible on the Product Data Reporting and Evaluation Program (PDREP) website at https://www.pdrep.csd.disa.mil/pdrep_files/other/wsr.htm.

Attachments:

1) SOW Attachment 1 – Excel Spreadsheet

2) CDRL A001 EXHIBIT A

3) CDRL B001 EXHIBIT B

Exhibit A Contract Data Requirements List (CDRL)

A001

DATE – 21 MARCH 2023

DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors; Administrative or Operational Use, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to: Project Manager, Tactical Aviation and Ground Munitions Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25.

RCONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB NO. 0704‐0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY:

TDP X TM Other

D. SYSTEM/ITEM

ATI-D

E. CONTRACT/PR NO.

F. CONTRACTOR

Intuitive Research & Technology Corp

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

Product Engineering Design Data and Associated Lists

3. SUBTITLE 17. PRICE GROUP

4. AUTHORITY (Data Acquisition Document No.)

DI‐SESS‐81000F

5. CONTRACT REFERENCE

SOW Task 2.2(9) & Para 2.3

6. REQUIRING OFFICE

SFAE‐MSL‐TAE

18. ESTIMATED

TOTAL PRICE

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

See 16

10. FREQUENCY

12. DATE OF FIRST SUBMISSION

14. DISTRIBUTION INSERT IN

a. ADDRESSEE

b. COPIES SECT.B

8. APP CODE

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT SUBMISSION

See 16 Draft Final

Reg Repro

16. REMARKS

Documents shall be prepared IAW TDP Option Selection Worksheet,attached.

Blk 8, 10, 11, 12, 13: Initial TDP submission within 60 days of contract award.

Government approval/disapproval shall be within 7 calendar days of delivery.

Blk 9: DISTRIBUTION STATEMENT

• Distribution Statement F. Further distribution only as directed by PEOMS TAGM ATI [10 March 2023] or higher DoD authority

See 16 1

15. TOTAL 1

G. PREPARED BY

Megan Mann

H. DATE

3/21/2023

I. APPROVED BY J. DATE

DD FORM 1423‐1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 3

Technical Data Package

Blk 14: Contractor shall notify DLA PCO and PEOMS ATI Program Manager when Technical Data Package is submitted.

Blk 16: Due Date- Initial TDP delivery due with prototype vehicle

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 1 page

CDRL BLOCK 9 DISTRIBUTION STATEMENTS AND EXPORT CONTROL

DISTRIBUTION STATEMENTS

DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies only; Proprietary Information, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to Tactical Aviation and Ground Munitions (TAGM) Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

DISTRIBUTION STATEMENT D. Distribution authorized to the Department of Defense and U.S. DoD contractors only; Administrative or Operational Use, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to Tactical Aviation and Ground Munitions (TAGM) Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

EXPORT CONTROL STATEMENT

UNLESS OTHERWISE APPROVED BY THE TAGM PROJECT OFFICE, ALL ENGINEERING TECHNICAL DATA, SOFTWARE AND COST DATA SHALL BE SUBJECT TO EXPORT RESTRICTIONS AND MARKED AS FOLLOWS:

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

Exhibit B Contract Data Requirements List (CDRL)

A002

DATE – 21 MARCH 2023

DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors; Administrative or Operational Use, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to: Project Manager, Tactical Aviation and Ground Munitions Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25.

RCONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB NO. 0704-0188

The public report ing burden for this collect ion of informat ion is est imated to average 110 hours per response, including the t ime for reviewing instruct ions, searching exist ing data sources, gathering and maintaining the data needed, and complet ing and reviewing the collect ion of informat ion. S end comments regarding this burden est imate or any other aspect of this collect ion of informat ion, including suggest ions for reducing the burden, to the Department of Defense, Execut ive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collect ion of informat ion if it does not display a current ly valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

C. CATEGORY:

TDP TM Other MISC

D. SYSTEM/ITEM

ATI-D

E. CONTRACT/PR NO.

W31P4Q-21-R-0052

F. CONTRACTOR

Intuitive

1. DATA ITEM NO.

A002

2. TITLE OF DATA ITEM

Technical Report – Study/Services

3. SUBTITLE

Supplemental Training Aid Presentation Material

17. PRICE GROUP

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B

5. CONTRACT REFERENCE

SOW 2.2 (14) & 2.2 (16)

6. REQUIRING OFFICE

SFAE-MSL-TAE

18. ESTIMATED

TOTAL PRICE

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

12. DATE OF FIRST SUBMISSION

14. DISTRIBUTION INSERT IN

a. ADDRESSEE

b. COPIES SECT.B

8. APP CODE

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT SUBMISSION

See 16 Draft Final

Reg Repro

16. REMARKS

Blks 8, 10, 12, 13: the Contractor shall deliver the presentation no later than 60 days prior to the last delivery. Government review/approval within 30 days of receipt.

Contractor shall submit revisions within 30 days of government comments.

Blk 9: For distribution statement and export control wording, see last page of this CDRL Package.

Blk 14: Delivery method shall be text-searchable electronic file sent via email to the PCO and the TAGM ATI-D program manager.

See 16 0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

Megan Mann

H. DATE

3/21/2023

I. APPROVED BY J. DATE

TDP OPTION SELECTION WORKSHEET

SYSTEM: ATI-D DATE PREPARED:

A. CONTRACT NO.

SPRRA1-23-R-0041

B. EXHIBIT/ATTACHMENT NO.

C. CLIN D. CDRL DATA ITEM NO.

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in Block 5.

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCT LEVEL

B. REMARKS:

2. TYPE AND FORMAT (X all that apply and complete as applicable)

A. TYPE 2D: 2D DRAWINGS (describe in detail in remarks below or in block 11):

NATIVE 2D CAD (SPECIFY TYPE): ________________________________________________________________

ISO 32000 PDF

HARD COPY

OTHER FORMAT (SPECIFY TYPE):________________________________________________

REMARKS:

B. TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11):

NATIVE 3D CAD (SPECIFY TYPE): ______________________________________ 3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. STEP AP203, AP 214 etc.).

2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc,)

OTHER FORMAT (SPECIFY TYPE): _____ _________________________________

* NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

3. CAGE CODE AND

DOCUMENT NUMBERS

A. CONTRACTOR CAGE & DOCUMENT NUMBERS

GOVERNMENT CAGE & DOCUMENT NUMBERS (COMPLETE 3B, 3C, and 3D)

B. USE CAGE CODE:

81996

C. USE DOCUMENT NUMBERS:

Will be assigned at time of need

D. TO BE ASSIGNED BY:

Government

4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

GOVERNMENT FORMAT CONTRACTOR FORMAT

5. TDP ELEMENTS REQUIRED (X all that apply)

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR

OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL ENGINEERING DESIGN DATA

DEVELOPMENTAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

COMMERCIAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

SPECIAL INSPECTION EQUIPMENT (SIE) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

SPECIAL TOOLING ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS QUALITY ASSURANCE PROVISIONS (QAPs)

6. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100

ENGINEERING DRAWING

PRACTICES

WITH APPENDICES:

B C D E Company stds permitted? Y / N

ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS

ASME Y14.34 ASSOCIATED LISTS

ASME Y14.35 REVISION OF ENGINEERING

DRAWINGS AND ASSOCIATED DOCUMENTS

ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA

PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

OTHER STANDARDS APPLY AS

DESCRIBED:

x x Solidworks x x

TDP OPTION SELECTION WORKSHEET

A. CONTRACT NO.

SPRRA-23-R-0041

B. EXHIBIT/ATTACHMENT NO.

C. CLIN D. CDRL DATA ITEM NO.

7. ASSOCIATED LISTS (X all that apply and complete as applicable)

A. PARTS LISTS (X ONE)* (1) INTEGRAL (2) SEPARATE (3) CONTRACTOR SELECT

B. DATA LISTS REQUIRED (Specify Levels of ASSY)_Top level through component generation breakdown list C. INDEX LISTS REQUIRED (Specify Levels of ASSY)____________________________________

D. WIRING LISTS (1) INTEGRAL (2) SEPARATE (3) CONTRACTOR SELECT

E. APPLICATION LISTS (1) INTEGRAL (2) SEPARATE (3) PLM

MAINTAINED

(4) CONTRACTOR SELECT

F. OTHER REQUIRED (Specify Levels of ASSY)____________________________________ *NOTE: USE OF SEPARATE PARTS OR WIRING LISTS ARE NOT RECOMMENDED ESPECIALLY WITH TYPE 3D TDPS.

8. TDP DATA MANAGEMENT PRODUCTS

A. TECHNICAL DATA PACKAGE LIST (TDPL)

SOURCE CONTROL APPROVAL REQUEST

DOCUMENT NUMBER ASSIGNMENT REPORT

PROPOSED CRITICAL MANUFACTURING PROCESS DESCRIPTION

ENGINEERING DRAWING TREE

TO LOWEST REPAIRABLE UNIT (LRU) LEVEL

TO LOWEST COMPONENT LEVEL

OTHER (DESCRIBE): _________________________________

B. REMARKS:

9. TDP METADATA

TDP METADATA REQUIRED (describe requirements):

MIS‐STD‐52406‐IS

10. TDP SUPPLEMENTARY DATA

TDP SUPPLEMENTARY DATA REQUIRED (describe requirements):

11. OTHER TAILORING (Attach additional sheets as necessary)

12. PROCURING ACTIVITY TITLE, SIGNATURE AND DATE

TITLE:

TAGM Configuration Management

SIGNATURE: DATE:

x x

CDRL BLOCK 9 DISTRIBUTION STATEMENTS AND EXPORT CONTROL

DISTRIBUTION STATEMENTS

DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies only; Proprietary Information, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to Tactical Aviation and Ground Munitions (TAGM) Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

DISTRIBUTION STATEMENT D. Distribution authorized to the Department of Defense and U.S. DoD contractors only; Administrative or Operational Use, Export Controlled; 23 Apr 2020. Other requests for this document shall be referred to Tactical Aviation and Ground Munitions (TAGM) Project Office, ATTN: SFAE-MSL-TAS, Redstone Arsenal, AL 35898.

EXPORT CONTROL STATEMENT

UNLESS OTHERWISE APPROVED BY THE TAGM PROJECT OFFICE, ALL ENGINEERING TECHNICAL DATA, SOFTWARE AND COST DATA SHALL BE SUBJECT TO EXPORT RESTRICTIONS AND MARKED AS FOLLOWS:

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.