00140_SPI.pdf

CAUTION NOTICES

NOTICE 1: MATERIAL PACKAGED IN PREVIOUS EDITIONS OF THIS SPI MUST BE REPACKAGED TO MEET THE REQUIREMENTS

OF THIS SPI REVISION.

NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES

EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

NOTES:

1. LAMINATE REF -3, CUSHION TO REF -2, CUSHION USING A-A-1936A, TYPE II ADHESIVE, SEE CUTTING DETAIL FOR

REF -3.

2. CRIMP REINFORCEMENTS REF -4, AND INSERT IN POSITION ILLUSTRATED.

3. USING REF -6, FILL EXCESS VOID TO INSURE ITEM IS SNUG WITHIN CUSHIONING CUT OUTS.

4. LAMINATE REF -11 PLATENS TO REF -10 USING A-A-1936A, TYPE II ADHESIVE OR EQUAL.

5. FOR SERVO ACTUATOR WITH SHORT RAMS MOVE REF -4 DW. REINFORCEMENTS IN AGAINST RAMS THEN FILL VOIDS WITH A-A-59135, CLASS 1, GRADE A OR EQUAL. INSURE VOID IS FILLED VERY TIGHT TO EQUAL SURROUNDING

CUSHIONING VALUE.

CAUTION:

THIS SERVO ACTUATOR MUST BE PUT IN THIS SPI PRIOR TO ANY HANDLING OR MOVEMENT. IT'S A CALIBRATED

INSTRUMENT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM No. 15) REQUIREMENTS

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR

LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) No. 15." THIS DOCUMENT CAN BE FOUND AT www.ippc.int.