AttachmentA3362.pdf
PDF 105 KB Posted
- Attached to
- MILSTAR Direct Current Motors
- Solicitation number
- SPRHA3-20-R-0104
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for a federal solicitation seeking direct current motors. The solicitation requests quotes for 17 each of motor part number 6105-01-609-3362MZ and 17 each of motor part number 6105-01-609-3363 to be used in MILSTAR systems. The Defense Logistics Agency Aviation is the contracting agency. Manufacturers must certify that the motors will be produced according to the specifications and standards outlined, including Military Standard 130 for unique item identification marking. Deviations from engineering drawings require prior approval.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA3-20-R-0104.pdf | ||
| CDRLS.pdf | ||
| AttachmentA3363.pdf | ||
| SOW.pdf | ||
| EDL3363.pdf | ||
| EDL3362.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
MOTOR,DIRECT CURRENT
2. PART NUMBER:
229-1200-006
3. NATIONAL STOCK NUMBER:
6105-01-609-3362MZ
PREPARED BY:
JACKSON ANDRASKO
OFFICE SYMBOL:
415 SCMS/GUMBB
DATE:
20191001
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING
ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY THE COGNIZANT ENGINEERING ACTIVITY.
7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.
8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY
UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.
9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO
INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE
REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING
LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .