SPI.pdf

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K7313 (19207) ANALOG MODULE W/CONTAINER 19207 AK16750307

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5998-01-675-0307 4/23/2019 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 20.9 1.254 15.1 X 15.1 X 9.5

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 54 1B 1 CONTAINER P/N: 19980-2401

13. CLEANING (DESIGN P/N: 19980-2400)

MIL-STD-2073-1

14. DRYING 2C 1 BAG: MIL-DTL-117, TYPE I, CLASS F, STYLE 1,

MIL-STD-2073-1 DESICCANT: MIL-D-3464, TYPE II

15. PACKING 3E 2 DESICCANT: MIL-D-3464, TYPE II

a. LEVEL A UNITS

MIL-STD-2073-1 AND NOTE H

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE G

17. NOTES / DRAWING

57K7313 CONSISTS OF: 1 EA. ANALOG MODULE, P/N: 12570244-2 AND 1 EA. REUSABLE CONTAINER, P/N:

19980-2401

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

B. PACKAGING OF THIS ESD SENSITIVE ITEM MUST BE ACCOMPLISHED AT AN ESD PROTECTED AREA IN

ACCORDANCE WITH MIL-STD-1686.

C. THE BAG IS TO BE OF ONE PIECE CONSTRUCTION. DO NOT MECHANICALLY EVACUATE. PLACE PART IN

BAG.

D. OPEN ALL LATCHES ON THE CONTAINER AND REMOVE THE LID. OPEN THE LID OF THE INNER BOX. PLACE

THE BAGGED PART INTO THE INNER BOX AS SHOWN ON PAGE 2. CLOSE THE BOX.

E. PLACE 2 UNITS OF DESICCANT INTO THE SMALL RECTANGULAR CAVITY IN THE FRONT OF THE BASE FOAM.

F. REPLACE THE CONTAINER LID AND SECURE ALL LATCHES.

G. MARKING:

1. THE FOLLOWING FIELDS SHALL BE COMPLETED ON THE CONTAINER IDENTIFICATION PLATE:

a. ITEM WITH CONTAIENR P/N

b. NOMENCLATURE

c. ITEM WITH CONTAINER NSN

d. CONTAINER P/N

2. ADDITIONAL MARKING SHALL HAVE THE SENSITIVE ELECTRONIC DEVICE SYMBOL AND THE ASSOCIATED

CAUTION LABEL EMPLOYED AS IT IS SPECIFED IN MIL-STD-129 ON THE UNIT PACK.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

I. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-1D

AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

19980-2401 CONTAINER

(19980-2400 DESIGN)

12570244-2

PART

POCKET FOR

DESICCANT

NOTE: BAG ON PART

IS NOT SHOWN

57K7313 ASSEMBLY

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K7313 (19207) ASSY AIM W/LLRC 19207 AK16750307

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5998-01-675-0307 4/23/2019 -