SPI AK14745889.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

9107265EX (1J955) ROTARY MANIFOLD HOUSING 19207 AK14745889

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-474-5889 2/24/2011

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 69.0 0.666 16.5 X 9.3 X 7.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, SEE NOTES C - E

13. CLEANING 1B - E A/R ITEM PREPERATION

MIL-STD-2073-1D 2-F A/R CONSOLIDATION

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D & NOTE H

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE G

17. NOTES:

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PART NUMBER 9107265EX CONSISTS OF THE FOLLOWING:

PACKING LIST

SEGREGATED PACK

NUMBER

QUANTITY PART NUMBER DESCRIPTION

1 1 1K0165 O’RING KIT

2 1 INSTALLATION MANUAL

3 1 9107265EX MANIFOLD

C. PREPARE PART NUMBER 1K0165 AS FOLLOWS:

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 6 X 8, CLOSE BY HEAT SEAL.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 1”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION

METHOD 31.

D. PREPARE INSTALLATION MANUAL AS FOLLOWS:

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 10 X 12, CLOSE BY HEAT SEAL.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION

METHOD 31.

E. PREPARE PART NUMBER 9107265EX AS FOLLOWS:

1. PRESERVATIVE: MIL-PRF-32033. FOG ITEM INTERNALLY WITH PRESERVATIVE, DRAIN EXCESS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

9107265EX (1J955) ROTARY MANIFOLD HOUSING 19207 AK14745889

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-474-5889 2/24/2011

17. NOTES:

2. CAPS/PLUGS: NAS-847. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.

3. PRESERVATIVE: MIL-PRF-16173, GR 4. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED

EXTERNAL METALLIC SURFACES.

4. WRAP: MIL-PRF-121, TY I, SIZE: 24 X 24. SECURE WRAP WITH TAPE ASTM-D6123.

5. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 3”.

6. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION

METHOD 20.

F. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES D – F AS FOLLOWS:

1. PLACE SPN’S 1 - 3 INTO CONTAINER. PLACE SPN 3 IN FIRST, PLACE SPN 1 IN VOID NEXT TO SPN 3

AND PLACE SPN 2 ON TOP.

2. CONTAINER: ASTM-D6880, CL 2, ST 2, MODIFIED, SIZE: 13-1/2 X 7-3/4 X 6. CONTAINER IS MODIFIED

TO ALLOW FOR RE-CLOSEABLE TOP PANEL AND 2 X 4 SKIDS IN ACCORDANCE WITH ASTM-D6880.

CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D6880.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION

METHOD 10.

G. PACKING LISTS: PROVIDE PACKING LISTS IN ACCORDANCE WITH MIL-STD-129 AND AS IDENTIFIED

WITHIN NOTE “B” OF THIS INSTRUCTION.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

ITEM SIZE QTY REFERENCE

6 X 8 POLY BAG 1 MIL-DTL-117, TY III, CL B, ST 2.

10 X 12 POLY BAG 1 MIL-DTL-117, TY III, CL B, ST 2.

24 X 24 GREASE PAPER 1 MIL-PRF-121, TY II

13-1/2 X 7-3/4 X 6 CRATE 1 ASTM-D6880, CL 2, ST 2, MODIFIED

C

SPN 1 CONTENTS

SPN 3

SPN 2