SPI_AK11928818-Rev-C_18JUL2019.pdf

1BSPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-OK

EMR

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

6-188-000148 (12361) BRAKE, SEGMENTED ROTOR 19207 AK11928818

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-192-8818 7/18/2019 C

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

001 NONE 80.5 1.251 13.4 X 10.9 X 14.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1E (METHOD 20)

13. CLEANING 1-B A/R INTERNAL PRESERVATIVE: SEE NOTE B

MIL-STD-2073-1E

14. DRYING 2-C A/R CAPS/PLUGS: NAS 847

MIL-STD-2073-1E

15. PACKING

3-D A/R EXTERNAL PRESERVATIVE: MIL-PRF-16173, GRADE 4

a. LEVEL A

4-E A/R BARRIER MATERIAL: MIL-PRF-121, TYPE I

MIL-STD-2073-1E AND NOTE H

b. LEVEL B

5-F 2 BLOCKING: ASTM D6199, CLASS 3 OR 2, GROUP I OR II

NOT APPLICABLE

16. MARKING 6-G 1 CONTAINER: ASTM D6880, CLASS 2, STYLE 4,

MIL-STD-129 SIZE: 10-3/8 X 9-3/8 X 13-1/4

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1E. INSPECT THE PACKING

IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PRESERVE INTERNALLY WITH MANUFACTURER’S RECOMMENDED LUBRICANT.

C. SEAL OPENINGS TO THE INTERIOR WITH CAPS/PLUGS OF THE APPROPRIATE SIZE OR TAPE.

D. APPLY TO ALL EXTERIOR BARE FERROUS SURFACES.

E. APPLY BETWEEN POINTS OF CONTACT OF THE ITEM WITH BLOCKING OR CONTAINER.

F. SEE PAGE 2 FOR SIZE AND ORIENTATION OF BLOCKING.

G. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D6880.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

6-188-000148 (12361) BRAKE, SEGMENTED ROTOR 19207 AK11928818

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-192-8818 7/18/2019 C

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 2 Pages