SPI_AK11964840_Rev_C.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 11 off 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-OK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

6-974-001851 (12361) HOIST, WIRE ROPE 19207 AK11964840

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3950-01-196-4840 2/13/2019

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 250.0 3.751 24.5 X 14.9 X 17.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 20

13. CLEANING 1-B PRESERVATIVE: SEE NOTE B

MIL-STD-2073-1E 2-C PRESERVATIVE: MIL-PRF-16173, GRADE 4

14. DRYING 3-D A/R BARRIER MATERIAL: MIL-PRF-121, TYPE I, SIZE: A/R

MIL-STD-2073-1E

15. PACKING

4-E 1

a. LEVEL A

CONTAINER: ASTM D6880, CLASS 2, STYLE 2,

MIL-STD-2073-1E & NOTE E

SIZE: 21-1/2 X 13-3/8 X 13-1/4

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1E AND THE

APPLICABLE CONTAINER SPECIFICATION.

B. PRESERVE INTERNALLY WITH OPERATIONAL LUBRICANT. THOROUGHLY DRAIN EXCESS.

C. APPLY PRESERVATIVE TO UNPAINTED EXTERIOR METALLIC SURFACES.

D. APPLY IN AREAS WHERE THE ITEM WOULD OTHERWISE MAKE CONTACT WITH THE BLOCKING OR THE

CONTAINER.

E. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D6880. THE UNIT CONTAINER IS THE SHIPPING

CONTAINER.

C

A/R A/R

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 22 off 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -OK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

6-974-001851 (12361) HOIST, WIRE ROPE 19207 AK11964840

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3950-01-196-4840 2/13/2019 C

17. NOTES/DRAWING

BLOCKING AND BRACING TOP VIEW

NOTE: PLACE ITEMS B AND C TIGHT UP AGAINST SPOOL SUPPORT BRACE AND ITEMS D AND E AGAINST

SPOOL RIM. ALL SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED. ALL BLOCKING AND

BRACING SHALL BE SECURED TO THE CONTAINERS INTERIOR WITH NAILS CONFORMING TO

ASTM F1667.

james.g.osborn Stamp james.g.osborn Stamp