SPI_AK10673899.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273920 (19207) CLUTCH ASSEMBLY, FRI 19207 AK10673899

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-067-3899 8-18-2006 D

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE *12.2 *0.177 *10.0 X 9.0 X 3.4

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 1A WRAP: A-A-3174, POLYETHYLENE, 6 MIL.

13. CLEANING

MIL-STD-2073-1D 2B PAD: ASTM-D4727, TYPE CF, CLASS D.

14. DRYING

MIL-STD-2073-1D 3C CONTAINER: ASTM-D5118, TYPE CF, CLASS D.

15. PACKING 4D BAG: MIL-DTL-117, TYPE I, CLASS E.

a. LEVEL A

MIL-STD-2073-1D AND NOTE E 5C CONTAINER: ASTM-D5118, TYPE CF, CLASS WR.

b. LEVEL B

MIL-STD-2073-1D AND NOTE E

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073.

B. FIBERBOARD FILLER PADS AND/OR DIE CUTS SHALL BE DEVISED AND USED TO IMMOBILIZE ITEM AND

PREVENT DAMAGE TO ITEM OR CONTAINER.

C. CONTAINER CLOSURE METHOD SHALL BE IN ACCORDANCE WITH ASTM-D1974.

D. COMPUTE SIZE AND CONFORM BAG IN ACCORDANCE WITH MIL-STD-2073.

E. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.

MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

F. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

* UNIT PACK WT, CU, AND SIZES ARE ESTIMATED AND ARE PROVIDED FOR INTERNAL GOVERNMENT

PLANNING PURPOSES ONLY.