SPRDL1-19-R-0202-Attachment_0001_(SPI-AK13705457).pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

5705522 (19207) PARTS KIT, PRESSURE 19207 AK13705457

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4820-01-370-5457 5-26-2006 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 2.9 0.488 12.4 X 8.3 X 8.2

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, SEE BLOCK 17. 1D 3 BAG: MIL-DTL-117, TYPE III, CLASS B, STYLE 2,

13. CLEANING SIZE: 2-1/2 X 3.

MIL-STD-2073-1D 2E 4 CAP: NAS847 OR EQUIVALENT.

14. DRYING 3E 1 WRAP: MIL-PRF-121, TYPE I,

MIL-STD-2073-1D SIZE: 16 X 9.

4F 1 BAG: MIL-DTL-117, TYPE I, CLASS E, STYLE 1,

15. PACKING SIZE: 10 X10.

a. LEVEL A 5F 1 CONTAINER: A-A-59736, TYPE I, STYLE A, MIL-STD-2073-1D AND NOTE G NSN: 8115-00-192-1604,

b. LEVEL B SIZE: 8 X 8 X 12.

MIL-STD-2073-1D AND NOTE G

16. MARKING

MIL-STD-129 AND NOTE C

17. NOTES / DRAWING

A THIS KIT, AS SHOWN ON THE INITIAL RELEASE (OR REVISION) OF DRAWING 5705522, CONSISTS OF THE

FOLLOWING PARTS CONSOLIDATED INTO 4 SEGREGATED PACKAGES:

SEGREGATED METHOD OF

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY. PRESERVATION

1 12336776 19207 VALVE ASSEMBLY 1 10

2 M83248/1-906 81349 PACKING,PERFORMED 2 10

3 M83248/1-904 81349 PACKING,PERFORMED 2 10

4 12387152-57L 19207 SCREW 4 10

B. MARKING, SEGREGATED PACKAGE.

MARK EACH SEGREGATED PACKAGE WITH THE SEGREGATED PACKAGE NUMBER.

C. MARKING.

MARK UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. IN ADDITION, ATTACH A PACKING LIST TO THE UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. ON THE PACKING LIST IDENTIFY THE ITEMS

WITHIN EACH SEGREGATED PACKAGE TOGETHER WITH THERE SEGREGATED PACKAGE NUMBER.

SPRDL1-19-R-0202, Attachment 0001

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

5705522 (19207) PARTS KIT, PRESSURE 19207 AK13705457

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4820-01-370-5457 5-26-2006 A

D.

PREPARE THE FOLLOWING PARTS AS DESCRIBED BELOW:

SEGREGATED

PART NUMBER NOMENCLATURE QTY. PACKAGE

M83248/1-906 PACKING, PERFORMED 2 2

M83248/1-904 PACKING, PERFORMED 2 3

12387152-57L SCREW 4 4

PLACE THE TOTAL QUANTITY OF EACH PART INTO THE SPECIFIED BAG AND CLOSE BY HEAT SEALING, STAPLING, OR TAPING.

E. 12336776, VALVE ASSEMBLY, SEGREGATED PACKAGE1, QUANTITY 1.

1. IF THE VALVE ASSEMBLY IS RECEIVED WITH CAPS, RECAPPING IS NOT NECESSARY; OTHERWISE, COVER OPENINGS WITH SPECIFIED CAPS.

2. WRAP VALVE ASSEMBLY AND SECURE WITH TAPE.

F. SECURE SEGREGATED PACKAGES 2, 3, AND 4 TO WRAPPED VALVE ASSEMBLY, SEGREGATED PACKAGE 1, WITH TAPE AND PLACE INTO BAG, TO FORM A MIL-STD-2073, METHOD 41 PACK. THEN PLACE BAGGED

KIT INTO CONTAINER.

G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.

MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

H. INSPECT THE PRESERVATION (SEE NOTE A), THE SEGREGATED PACKAGES, CONSOLIDATION PACKS (WHEN A METHOD IS SPECIFIED), UNIT PACK AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND

THE APPLICABLE CONTAINER SPECIFICATION.

SPRDL1-19-R-0202, Attachment 0001