SPI_-_AK15845955_rev,A.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

AS-0747-C (62161) WHEEL, PNEUMATIC TIRE 19207 AK15845955

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-584-5955 10/5/2017 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 815.0 40.788 55.0 X 55.0 X 23.3

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-B A/R PRESERVATIVE: A-A-52408

MIL-STD-2073-1 2-C A/R BARRIER: ASTM-D4727, TY CF, CL WR,

14. DRYING GR W5c, VR SW

MIL-STD-2073-1 4-D 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST A,

15. PACKING SIZE: 52-3/4 X 52-3/4 X 17-1/2

a. LEVEL A

MIL-STD-2073-1 & NOTE D

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE E

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE TO ALL RUBBER AREAS OF TIRE.

C. LINE CONTAINER AND LID WITH CORRUGATED FIBERBOARD BARRIER MATERIAL TO PREVENT ITEM

FROM COMING IN CONTACT WITH CONTAINER LUMBER, SECURE USING TAPE.

D. CONTAINER SHALL USE A UNNAILED TOP PANEL IN ACCORDANCE WITH ASTM-D6251. CLOSURE SHALL BE ACCOMPLISHED USING INNER EDGE CLEATS AND SHALL BE BANDED. NAILS AND STAPLES ARE

NOT TO BE USED TO SECURE LID.

E. TIRE/WHEEL ASSSEMBLY IS A SIX YEAR, EXTENDIBLE SHELF LIFE ITEM AND SHALL BE MARKED AS

SUCH IN ACCORDANCE WITH MIL-STD-129.

F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

SPECIAL PACKAGING INSTRUCTION