AK15404212.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-MB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4776 (19207) TRANSMISSION W/ CONTAINER* 19207 AK15404212

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-540-4212 03-27-09 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

001 NONE 1714.0 52.0 60.0 X 36.5 X 41.0

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 55 1-B PRESERVATIVE: MIL-PRF-2104, GRADE OE/HDO-15/40

13. CLEANING

MIL-STD-2073-1 METHOD I 2-D PRESERVATIVE: MIL-PRF-16173, GR 4

14. DRYING

MIL-STD-2073-1 3-C WRAPS: MIL-PRF-3420, TYPE 1 & MIL-PRF-121, GR A

15. PACKING 4-F DESICCANT: MIL-D-3464, TYPE 1

a. LEVEL A

MIL-STD-2073-1 AND NOTE G 5-G CONTAINER: P/N: 00198700000 CAGE: 94231

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. *CONSISTS OF:

1 EA DRESSED TRANSMISSION (W/ FLYWHEEL), P/N: 3590229 CAGE: 45152

1 EA REUSABLE CONTAINER, P/N: 00198700000 CAGE: 94231

CONTAINER WEIGHT: 614.0 LBS

CONTAINER INTERIOR CUBE: 35.1 CU. FT.

B. FILL TO OPERATING LEVEL AND ROTATE TO COMPLETELY COVER ALL INTERNAL SURFACES. REMOVE

DRAIN PLUG AND DRAIN ASSEMBLY. REINSTALL DRAIN PLUG AND TORQUE TO 15-20 LB-FT.

C. ENCLOSE FLYWHEEL WITH WRAP MIL-PRF-3420, TYPE 1 COVERED WITH SECOND WRAP MIL-PRF-212, GRADE A. EXTEND BOTH WRAPS OVER THE TRANSMISSION’S ENGINE CONNECTING FLANGE. SECURE

WRAP AROUND FLANGE WITH TAPE.

D. COAT ALL UNPAINTED, UNPLATED EXTERIOR FERROUS METAL SURFACES, EXCEPT THE FLYWHEEL.

CAUTION: DO NOT APPLY OIL, GREASE OR ANY WAX BASE PRESERVATIVE COMPOUND TO THE

FLYWHEEL.

E. SECURE THE TRANSMISSION INTO THE CONTAINER USING THE SUPPLIED HARDWARE. INSTALLATION

DECAL IS LOCATED ON THE CONTAINER.

F. PLACE 42 UNITS OF DESICCANT INTO CONTAINER BASKET.

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

H. INSPECT THE CONTAINER IN ACCORDANCE WITH A-A-52462, INCLUDING THE FIRST ARTICLE INSPECTION REQUIREMENTS. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.