SPI_AK10600971.pdf

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

1587513-1 (83298) ROTOR, GENERATOR 19207 AK10600971

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-060-0971 6-26-03 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 38.5 1.072 16.8 X 10.6 X 10.4

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 SEE NOTES

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE J

b. LEVEL B

MIL-STD-2073-1D AND NOTE J

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. PLACE ONE CAP, ITEM 1, IN EACH END OF GENERATOR ROTOR.

C. APPLY PRESERVATIVE, ITEM 2, TO BARE FERROUS SURFACES ONLY.

D. WRAP SHAFTS IN CUSHIONING, ITEM 3, TO ISOLATE WASHERS ON BOTH ENDS. SECURE USING TAPE.

E. WRAP ROTOR IN WRAP, ITEM 4, SECURE USING TAPE.

F. PLACE FOAM END CAPS, ITEMS 5A AND 5B, OVER ROTOR ENDS. SEE ASSEMBLY DRAWING ON PAGE 2.

G. PLACE PREPARED ITEM IN CONTAINER, ITEM 6. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

H. PLACE PREPARED ITEM IN BAG, ITEM 7. CLOSE BY HEAT SEALING.

I. PLACE ITEM IN CONTAINER, ITEM 8. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

J. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.

MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

K. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

1587513-1 (83298) ROTOR, GENERATOR 19207 AK10600971

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-060-0971 6-26-03 -

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages

7-1/4 6-1/8

3-1/8

9-1/4

9-1/49-1/4

3-7/8

5-3/8 7-1/4

9-1/4

2-3/8

7-1/8

7-1/4

2-3/8

7-1/4

4-3/4

ITEM 5A ITEM 5B

5A 5B

P/N 1587513-1

ASSEMBLY

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

1587513-1 (83298) ROTOR, GENERATOR 19207 AK10600971

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-060-0971 6-26-03 -

BILL OF MATERIALS

ITEM

NUMBER

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

1 CAP A/R SAE-A90376. 2

2 PRESERVATIVE A/R MIL-PRF-21260. A/R

3 CUSHIONING 8 X 2 A-A-59135, CLASS 1, GRADE A. 2

4 WRAP 24 X 20 MIL-PRF-121, TYPE II. 1

5 CUSHIONING A-A-59136, CLASS 1, TYPE I.

5A SEE PAGE 2 1

5B SEE PAGE 2 1

6 CONTAINER 16 X 9-1/4 X 9-1/4 ASTM-D118, TYPE CF, CLASS D, STYLE

RSC, VARIETY SW, GRADE 200.

7 BAG 23 X 31 MIL-DTL-117, TYPE I, CLASS E, STYLE

1.

8 CONTAINER 16-1/2 X 10 X 9-3/4 ASTM-D118, TYPE CF, CLASS WR,

STYLE RSC, VARIETY SW,

GRADE W5c.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages