SPI_AK14133653.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12446898-2 (19207) HUB ASSEMBLY, VEHICULAR 19207 AK14133653

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-413-3653 11/08/2016 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

001 N/A 85.0 1.733 17.6 X 14.3 X11.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B PRESERVATIVE: MIL-L-2105, GR 80/90

MIL-STD-2073-1 2-C CLOSURE: MIL-C-5501

14. DRYING 3-D PRESERVATIVE: MIL-PRF-16173, GR 4

MIL-STD-2073-1

15. PACKING

4-E 4 CUSHIONING: ASTM-D4727, CL DOM, TY CF

5-F 1 CONTAINER: ASTM-D5118, TY CF, CL WR, VAR SW

a. LEVEL A

GR V3c, ST RSC, SIZE: 16-3/8 X 11-1/8 X 13

MIL-STD-2073-1 & NOTE G

b. LEVEL B

6 1 BAG: MIL-DTL-117, TY I, CL E, ST I SIZE: 27 X 34

MIL-STD-2073-1 & NOTE G 7-F 1 CONTAINER: ASTM-D5118, TY CF, CL WR,

16. MARKING GR V3c, ST RSC, SIZE: 17-3/8 X 11-5/8 X 13-3/4

MIL-STD-219

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE

PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. INTERNAL PRESERVATION: FILL HUB ASSEMBLY TO OPERATING LEVEL WITH OIL, ROTATE INTERNAL MECHANISM TO SUFFICIENTLY ASSURE COMPLETE COVERAGE OF ALL INTERNAL SURFACES. DRAIN ASSEMBLY. (ASSEMBLIES FILLED WITH SPECIFIED OIL AND TESTED DURING BREAK-IN TEST NEED NOT BE REFILLED. INSPECTION SHALL BE MADE TO ASSURE ASSEMBLIES HAVE BEEN PROPERLY DRAINED.)

C. SEAL ALL PORTS WITH CAPS OR PLUGS OF THE APPROPRIATE SIZE.

D. APPLY PRESERVATIVE TO EACH OF THE EIGHT STUDS.

E. FOR FABRICATION AND PLACEMENT OF CUSHIONING, SEE SKETCHES ON PAGES 2 AND 3.

F. CLOSURE SHALL BE IN ACCORDANCE WITH CONTAINER SPECIFICATION, EXCEPT METAL FASTENERS

SHALL NOT BE USED.

G. PACKING:

LEVEL A PACKAGING SHALL BE ACCOMPLISHED USINGWOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D6251, TYPE III, CLASS 2, OR NAILED WOOD BOXES CONFORMING TO ASTM-D6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC APPLICABLE METHODS OF ASTM-D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR

PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12446898-2 (19207) HUB ASSEMBLY, VEHICULAR 19207 AK14133653

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-413-3653 11/08/2016 A

17. NOTES/DRAWINGS CONTINUED

17. NOTES:

1. ALL DIMENSIONS ARE IN INCHES.

2. EQUALS A SCORE LINE.

3. FABRICATE CUSHIONING “A”, “B”, AND “D” USING A GOOD WATERPROOF ADHESIVE AND AS SHOWN

BELOW. THICKNESS OF CUSHIONING “A” SHALL BE 1-1/8 INCHES AND THE THICKNESS OF

CUSHIONING “B” SHALL BE 1-3/4 INCHES.

4. FABRICATE CUSHIONING “C” USING VARIETY TW AND AS SHOWN BELOW.

5. THE ARROW INDICATES THE FLUTE DIRECTION OF CUSHIONING “D”.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12446898-2 (19207) HUB ASSEMBLY, VEHICULAR 19207 AK14133653

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-413-3653 11/08/2016 A

17. NOTES/DRAWINGS CONTINUED

18. NOTES:

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages