Attachment_0001_-_AG00000601_Packaging_Instructions.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

1. PART OR DRAWING NO.

Circuit Card and Printed Circuit Board Assemblies

2. CODE IDENT

80063

3. SPI NO.

AG00000601

4. NATIONAL STOCK NO

5895-01-544-8314

5. DATE OF DRAWING

04124

6. REVISION

B

7. QUP

8. ICQ

None

9.UNIT PACK WEIGHT 10.UNIT PACK CUBE 11.UNIT PACK SIZE

12. PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MILITARY

NOTE 1

N/A N/A N/A

13. CLEANING

MIL-STD-2073-1, PROCEDURE 1

APPLICABLE DOCUMENTS

14. DRYING

MIL-STD-2073-1

A-A-59736

MIL-DTL-117

MIL-PRF-121

MIL-PRF-55585

MIL-P-81997

MIL-STD-129

MIL-STD-2073-1

ASME MH1

ASTM D 5330

ASTM D 5330

ASTM D 5486

15. PACKING

a. LEVEL A

MIL-PRF-55585

b. LEVEL B

MIL-PRF-55585

16. MARKING

MIL-STD-129 AND FIGURE 1

17. NOTES/DRAWING

1. PRESERVATION. MIL-STD-2073-1 as specified herein, ensuring compliance with the applicable requirements of that specification.

1.1 Military.

1.1.1 Electrostatic sensitive assemblies. Unit pack each submethod 41 as follows: Wrap or cushion with antistatic materials (as required). Place item within a bag conforming to MIL-DTL-117, type I, class F. Heat seal bag.

Reclosable cushioned pouches conforming to MIL-DTL-81997, type I or II, may be used in lieu of initial wrap or cushioning. Place a MIL-STD-129 electrostatic discharge (ESD) caution label (Figure 1) on the container conforming to A-A-59736, type II (see Table I). Close the container by securing both ends with tape conforming to ASTM D 5330 and sealing all openings with tape conforming to ASTM D 5486. Place a MIL-STD-129 ESD caution label (Figure 1) on the box.

1.1.2 Nonsensitive assemblies. Unit pack each assembly submethod 41 as follows: Wrap with barrier material conforming to MIL-PRF-121, type II, class 2. Place item within a bag conforming to MIL-DTL-117, type I or II, class E, style 1. Heat seal bag. Place bagged item into a cushioned box conforming to A-A-59736, type II. Close the container by securing both ends with tape conforming to ASTM D 5330 and sealing all openings with tape conforming to ASTM D 5486.

DA FORM 2169, JUN 86 Page 1 of 4

(Continuation Sheet )

OMB No. 0704-0188

1. PART OR DRAWING NO.

Circuit Card and Printed circuit Board Assemblies

2. CODE IDENT

80063

3. SPI NO.

AG00000601

4. NATIONAL STOCK NO

. MULTIPLE NSN

5. DATE

04124

6. REVISION

B

1.2 Unitization. Palletization shall be required when quantities per destination exceed either a total of 250 pounds (excluding the pallet) or a volume of 20 cubic feet. A quantity of items, packed for shipment, shall be placed on pallets, standard size 40 x 48 inches, 4-way entry, in accordance with ASME MH1, class 1 or 2, type 3, any style, size 2, or part 9 of the document, size 2 (48 x 40 inches). The load shall be “bonded” to the pallet by any means that will ensure safe delivery to destination.

DA FORM 2169C, JUN 86 Page 2 of 4

2. CODE IDENT

80063

3. SPI NO.

AG00000601

4. NATIONAL STOCK NO

. MULTIPLE NSN

5. DATE

04124

6. REVISION

B

TABLE I. FAST PACK SELECTION

This table is intended only as an aid to container selection and does not eliminate any testing or approval requirements. Containers are in accordance with A-A-59736.

MAXIMUM BARE ITEM

DIMENSIONS

MAXIMUM

BARE WEIGHT

CONTAINER INSIDE

DIMENSIONS

CTNR

CODE

CTNR

WEIGHT CTNR OUTSIDE DIMENSIONAL DATA

L W D CUBE

3 x 3 x 6 4.00 6 x 6 x 10 NR 1.4 6.3 6.3 10.5 0.241

4 x 4 x 8 8.50 8 x 8 x 12 NR 2.4 8.3 8.3 12.5 0.498

5 x 5 x 6 9.00 10 x 10 x 12 NR 3.2 10.5 10.5 12.5 0.798

6 x 6 x 8 12.00 12 x 12 x 14 NR 4.8 12.5 12.5 14.5 1.311

6 x 6 x 10 20.00 12 x 12 x 18 NR 5.3 12.5 12.5 18.5 1.673

7 x 7 x 10 30.00 14 x 14 x 16 NR 7.5 14.3 14.3 16.5 1.953

5 x 4-1/2 x 1-1/4 0.50 6 x 5 x 2-1/2 NS 0.3 6.3 5.3 3.0 0.060

5 x 4-1/2 x 2-1/4 1.00 6 x 5 x 3-1/2 NS 0.4 6.3 5.3 4.0 0.077

8 x 5-1/2 x 1-1/4 0.90 9 x 6 x 2-1/2 NS 0.6 9.3 6.3 3.0 0.102

8 x 5-1/2 x 2-1/4 1.80 9 x 6 x 3-1/2 NS 0.7 9.3 6.3 4.0 0.136

11 x 7-1/2 x 1-1/4 1.80 12 x 8 x 2-1/2 NS 0.8 12.3 8.3 3.0 0.177

11 x 7-1/2 x 2-1/4 3.60 12 x 8 x 3-1/2 NS 0.9 12.3 8.3 4.0 0.236

17 x 11-1/2 x 1-1/4 4.30 18 x 12 x 2-1/2 NS 2.8 18.3 12.5 3.0 0.397

17 x 11-1/2 x 2-1/4 7.80 18 x 12 x 3-1/2 NS 2.9 18.3 12.5 4.0 0.530

9 x 9 x 2-1/4 2.70 10 x 10 x 3-1/2 NS 1.0 10.3 10.3 4.0 0.246

12 x 12 x 2-1/4 4.00 13 x 13 x 3-1/2 NS 1.5 13.3 13.3 4.0 0.409

15 x 15 x 2-1/4 5.30 16 x 16 x 3-1/2 NS 2.0 16.3 16.3 4.0 0.615

23 x 15 x 2-1/4 10.00 24 x 16 x 3-1/2 NS 3.5 24.3 16.3 4.0 0.917

24 x 11 x 9 50.00 30 x 16 x 14 NV 13.0 30.8 16.8 14.3 4.282

26 x 8 x 6 30.00 32 x 12 x 14 NV 11.0 32.8 12.8 14.3 3.474

18 x 8 x 8 40.00 24 x 14 x 14 NV 9.5 24.8 14.8 14.3 3.037

16 x 10 x 5 7.00 20 x 14 x 9 NV 4.3 20.8 14.8 9.3 1.657

24 x 13 x 11 50-80 32 x 18 x 16 NV 22.0 32.8 18.8 16.3 5.817

18 x 13 x 11 50.00 24 X 18 X 16 NV 14.0 24.8 18.8 16.3 4.398

20 x 5 x 5 20.00 26 x 9 x 9 NV 5.5 26.8 9.8 9.3 1.414

25 x 18 x 12 90.00 34 x 24 x 18 NV 27.0 34.8 24.8 18.3 9.140

18 x 18 x 5 60.00 30 x 27 x 14 NV 18.0 30.8 27.8 14.3 7.086

13 x 7 x 7 19.00 25 x 14 x 14 NV 8.0 25.8 14.8 14.3 3.160

14 x 7 x 7 30.00 20 x 14 x 14 NW 8.4 20.5 14.5 14.3 2.460

16 x 7-1/4 x 7-1/4 31.00 22 x 16 x 16 NW 9.5 22.5 16.5 16.3 3.502

NR = VERTICAL STAR NS = SLIDE NV = ENCAPSULATED NW = HORIZONTAL STAR

DA FORM 2169C, JUN 86 Page 3 of 4

2. CODE IDENT

80063

3. SPI NO.

AG00000601

4. NATIONAL STOCK NO

. MULTIPLE NSN

5. DATE

04124

6. REVISION

B

FIGURE 1.

DA FORM 2169C, JUN 86 Page 4 of 4