Exhibit_A_Technical_Requirement.pdf

Exhibit A SPRBL1-18-Q-0016 Page 1 of 4

Issue: 30 November 2017

TECHNICAL REQUIREMENTS

Hardware Spare

NSN 5995-01-564-2112, Cable Assembly- Special Purpose Electrical

WIN-T Increment 1

Exhibit A SPRBL1-18-Q-0016 Page 2 of 4

TABLE OF CONTENTS

APPLICABLE DOCUMENTS

CONFIGURATION BASELINE

PACKAGING

Wood Packing Material

Preservation, Packing and Marking Instructions

PERFORMANCE REQUIRMENTS

Inspection and Testing

Quality

Exhibit A SPRBL1-18-Q-0016 Page 3 of 4

APPLICABLE DOCUMENTS

Military and Federal Standards

MIL-STD-129R Military Marking for Shipment and Storage

MIL-STD-130N Identification Marking of U.S. Military Property

Military and Federal

Specifications

None

Other Documents None

Commercial Documents

ASTM D3951-15 Standard Practice for Commercial Packaging

Security Documents None

CONFIGURATION BASELINE

The applicable Configuration Baseline (CB), for the listed Configuration Item (CI), is as listed in the table below.

NSN Nomenclature CAGE Part Numbers/Drawings

5995-01-564-2112 Cable Assembly, Special

Purpose, Electrical

80063 A3179585-1 and A3179585-2

PACKAGING

Wood Packing Material

Wood packing material includes pallets. See DLAD T/Q RP001 DLA Packaging Requirements for

Procurement.

Preservation, Packing and Marking Instructions

Packaging shall be in accordance with ASTM D3951-15 Standard Practice for Commercial Packaging. Level of Preservation (LOP): Commercial, Level of Pack (LPK): Commercial, Quantity Unit Pack (QUP): 001.

Marking shall be IAW MIL-STD-129R. MIL-STD-129R is applicable.

Exhibit A SPRBL1-18-Q-0016 Page 4 of 4

PERFORMANCE REQUIRMENTS

Under this IDIQ contract, the Contractor shall serve as the prime Contractor and shall procure or manufacture all of the items as ordered by the Government in accordance with this Technical Requirements document.

Inspection and Testing

The contractor shall maintain a system for the identification of the process, and inspection/test status of the

NSN. The contractor shall perform final Inspection and testing on all deliverables in accordance with the contractor's Inspection and Testing Procedures. These inspection reports shall be available to the Government or their representatives upon request. Equipment and facilities required for inspection and testing shall be the

Contractor’s responsibility.

Quality

The Contractor shall implement and maintain a Quality Assurance System to ensure product integrity that meets or exceeds commonly accepted practices employed by industry both in national and international environments.