SPRBL1-17-R-0001_Tech_Specs_and_Instructions.pdf

Attachment 001 SPRBL1-17-R-0001 Issue: 04 Nov 2016

ARMY ENGINEER AND ITEM MANAGER (E/IM) – PLEASE FOLLOW THE INSTRUCTIONS IN

RED, AND INCORPORATE APPLICABLE RESPONSES.

TECHNICAL SPECIFICATIONS AND INSTRUCTIONS

Light Interference Filter

APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129 Military Marking for Shipment and Storage MIL-STD-2073 Standard Practice for Military Packaging

Military and Federal Specifications

MIL-PRF-49257 Coated Optical Component (COC) (SECRET)

Other Documents 5009737 Light Interference Filter Assembly Security Classification Guide for Image Intensifier Devices (31

October 2013) Commercial Documents ISPM Number 15 Regulation of Wood Packaging Material in International Trade ANSI/ISO/ASQ(E) Q9001-2008 American National Standard, Quality Management Systems

Requirements EIA-649-1 Configuration Management Requirements For Defense Contracts

Security Documents

CONFIGURATION BASELINE

The applicable Configuration Baselines (CB), for the listed Configuration Item (CI) and/or Computer Software Configuration Item (CSCI), are as listed in the table below.

NSN Nomenclature Part Numbers/Drawings 5855-01-379-1410 Filter, Infrared Light 5009737

The Contractor shall establish a Configuration Management Program in accordance with EIA-649-1.

No changes or departures from the CB are acceptable except for changes or departures which are submitted in accordance with EIA-649-1, DI-SESS-80639, DI-SESS-80640, and DI-SESS-80642, and are approved by the Government Configuration Manager (C Mgr.) or Configuration Management Officer (CMO) and which are made applicable to the contract by the PCO.

CHEMICAL AGENT RESISTANT COATING (CARC)

Paint Colors

X = Applicable Location Color

Color No.

FED-STD 595

Exterior – Lusterless Green Green 383 34094

Exterior – Camouflage – Desert Colors Green 383 34094 Black 37030 Tan 686A 33446 Green 24533 Brown 383 30051 White 27875

Interior Shelter Surfaces Green 24533

(White or Green) White 27875 Other

Special Instructions

X = Applicable Location or Part Instruction Antenna Elements, including protective covers, i.e. fiberglass shields.

Part that conforms to a Government requirement.

Finish as required by the individual part requirement.

Parts subject to temperatures in excess of 400 degrees F (205 degrees C).

Paint with heat resistant paint.

Parts which can be flexed. Do not paint with CARC.

CARC Marking Stencil “CARC” in CARC paint in close proximity to the nameplate using a contrasting color, or use plates or embossed lettering.

Marking shall be durable enough to withstand all environmental conditions during field use.

PACKAGING

Marking All unit packs, intermediate packs, and exterior shipping containers shall be legibly and durably marked in accordance with MIL-STD-129.

Wood Packing Material Wood packing material includes pallets. See DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM).

Military Packaging DS7029 Preservation, Packing and Marking Instructions

LEGEND

Qty Quantity Prot Req Protection Required PGE-REF Packaging Reference (Military Standard) LPK Level of Packing QUP Quantity per Unit Pack ICQ Intermediate Container Quantity Pkg Reqmt Codes Packaging Requirement Codes when PKG-REF cites MIL-STD-2073 The below codes are for special markings:

PC Project Code WG Warranty/Guarantee SL Shelf Life BC Bar Code FMS Foreign Military Sales

NSN Prot Req PKG-REF LPK QUP ICQ Special Markings

Pkg J. J J J J J J J J J Reqmt I. II. III. IV. V. VI. VII. VII.a IX X Codes (MP) (CD) (PM) (WM) (CD) (CT) (UC) (IC) (PK) (SM) 5855-01-379-1410 Military MIL-STD-2073-1E B 001 - 10 1 00 DA NA B D4 BC

SECURITY REQUIREMENTS

In performing this contract the contractor will have access to classified information, and will receive and generate classified material. The contractor shall have a SECRET facility clearance with a SECRET safeguarding capability.

Contractor will have access to classified information only at the contractor facility. The contractor will require access to FOUO information, Secuirty/Program Classification Guide(s), and the SIPRNET.

The contractor shall refer to the “Security Classification Guide for Image Intensifier Devices” published 31 October 2013, for additional instructions and guidance on the security classification of information and material pertaining to this contract.

The contractor shall have access to classified information and SIPRNET only at the Contractor’s facility. All contractor employees with access to a government info system must be registered in the ATCTS (Army Training Certification Tracking System) at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the IS and then annually thereafter. All contractor employees and associated sub-contractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M and AR 25-2 within six months of appointment to IA/IT functions.

TEMPEST requirements apply.

The contractor shall develop an OPSEC Standing Operating Procedure (SOP)/Plan within 90 calendar days of contract award, to be reviewed and approved by the responsible Government OPSEC officer. This plan will include a process to identify critical information, where it is located, who is responsible for it, how to protect it and why it needs to be protected. The contractor shall implement OPSEC measures as ordered by the commander. In addition, the contractor shall have an identified certified Level II OPSEC coordinator per AR 530-1.

Per AR 530-1 Operations Security, the contractor employees must complete Level I OPSEC Awareness training.

New employees must be trained within 30 calendar days of their reporting for duty and annually thereafter. Level I OPSEC training is available at the following website: http://cdse.edu/catalog/elearning/GS130.html (Duration: 45 minutes).

Contractor shall comply with FAR 52.204-2, Security Requirements. This clause involves access to information classified “Confidential,” “Secret,” or “Top Secret” and requires contractors to comply with— (1) The Security Agreement (DD Form 441), including the National Industrial Security Program Operating Manual (DoD 5220.22- M); (2) any revisions to DOD 5220.22-M, notice of which has been furnished to the contractor.

Per AR 381-12 Threat Awareness and Reporting Program (TARP), contractor employees must receive annual TARP training by a CI agent or other trainer as specified in 2-4b.