I.P-2. JML 5295E851 - Drawing.pdf

This document is a technical drawing for a 15-fiber grommet, providing detailed dimensional specifications and manufacturing requirements. The top section shows a precise cross-section diagram with multiple fiber/hole placements, including exact measurements such as 4X .160±.001, 2X .107±.001, and 8X .053±.001. The overall grommet diameter is .678 inches, with 15 holes of .085±.001 diameter.

The requirements section specifies three key manufacturing guidelines: 1) MIL-HDBK-454 shall be used for workmanship standards, 2) all burrs and sharp edges must be removed to a maximum of .015, and 3) surface finish shall be 125 unless otherwise specified. Additionally, the document includes a tolerance table indicating dimensional precision for angles (±30') and decimal measurements (.XX ± .02, .XXX ± .005), with a note emphasizing that the drawing should not be scaled.