SPMYM326Q2001 Exhibit B.pdf
PDF 136 KB Posted
- Attached to
- Hardware
- Solicitation number
- SPMYM326Q2001
About this file
This Contract Data Requirements List (CDRL) pertains to a contract for socket flat countersunk head cap screws (Contract No. 52744151). The document outlines two specific data items that the contractor must submit:
Data Item B001 is a Certificate of Compliance for Quality Certification, to be submitted one time with the material. Data Item B002 is a Certification Data/Report for Chemical & Mechanical Certification, also to be submitted one time with the material. Both items require submission under a separate shipment number and are associated with specific technical requirements. The certification for B002 must include actual quantitative test results for chemical and mechanical tests, with specific notes about fastener testing requirements. The document is prepared by Conrad Gagne and approved by Edward Walsh, with preparation and approval dates of 08/14/2025 and 08/18/2025 respectively, and is associated with Requiring Office Code 245.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM326Q2001 RFQ.docx | DOCX document | |
| SPMYM326Q2001 Exhibit A.pdf | ||
| SPMYM326Q2001 Combined Synopsis Solicitation.docx | DOCX document | |
| SPMYM326Q2001 Security Agreement For NNPI.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 250423.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1637-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
B
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK HEAD
CAP SCREW ANGLE
E. CONTRACT/PR NO.
52744151
F. CONTRACTOR
1. DATA ITEM NO.
B001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
B002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C
H. DATE
08/14/2025
I. APPROVED BY 245.5
8 / 1 8 / 2 0 2 5
X E D W A R D W A L S H
S i g n e d b y : W A L S H .E D W A R D .M .1 4 1 1 0 4 8 0 3 5
J. DATE
08/18/2025
File details come from the government source that posted it. Updated .