SPMYM325Q3117 Exhibits A-M.pdf
PDF 982 KB Posted
- Solicitation number
- SPMYM325Q3117
About this file
This is a Contract Data Requirements List (CDRL) package containing multiple exhibits (A-M) that specify the data deliverable requirements for a Defense Logistics Agency (DLA) contract for various types of capscrews, including socket flat countersunk head capscrews, hex head capscrews, and self-locking capscrews.
The CDRL requires two key data items for each hardware component: 1) Certificate of Compliance (A001) and 2) Chemical & Mechanical Certification Data/Report (A002). Both deliverables must be submitted one time with material delivery. The certification requirements include detailed test results for chemical and mechanical properties, with quantitative data in specified units. Special requirements apply for fastener testing, including evidence of correct specimen quantities and new untested fasteners for wedge tensile and yield strength testing. Distribution requirements specify one final copy to be provided to addressee 133.2. The exhibits are approved by N. Whitehill and Jason Laflamme between February-March 2025, with preparation by Conrad Gagne and Steve Young. The CDRL package supports contract numbers 43534001-3, 50164021-4, 50284021-4, and 50294001-2 under SPMYM325Q3117.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 25Q3117 Clauses - Full Text.docx | DOCX document | |
| SPMYM325Q3117 RFQ CapScrews.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0450-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
A TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
43534001 CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CONRAD GAGNE Ext: 6797 12/19/2024 X N. Whitehill 02/06/25 245.2C
DEB0076
Typewritten Text 0002, 0003
DEB0076
Typewritten Text
SPMYM325Q3117
DEB0076
Typewritten Text
TBD
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
B
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
43534002 CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CONRAD GAGNE Ext: 6797 12/19/2024 X N. Whitehill 02/06/25 245.2C
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0005, 0006
DEB0076
SPMYM325Q3117
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
C
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
43534003 CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CONRAD GAGNE Ext: 6797 12/19/2024 X N. Whitehill 02/06/25 245.2C
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0008, 0009
DEB0076
245.2C-0571-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
D TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
50164021 SELF-LOCKING CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CONRAD GAGNE Ext: 6797 01/16/2025 X 245.2C
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0011, 0012
DEB0076
245.2C-0571-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
E TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
50164022 SELF-LOCKING CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
CONRAD GAGNE Ext: 6797 01/16/2025 X 245.2C
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0014, 0015
DEB0076
245.2C-0642-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
F TOP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD CAP SCREW 50284021
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/5/2025
CONRAD GAGNE Ext: 6797 01/28/2025 X 02/05/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0017, 0018
DEB0076
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
G TOP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD CAP SCREW 50284022
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/5/2025
CONRAD GAGNE Ext: 6797 01/28/2025 X 02/05/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0020, 0021
DEB0076
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
H TOP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD CAP SCREW 50284023
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/5/2025
CONRAD GAGNE Ext: 6797 01/28/2025 X 02/05/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0023, 0024
DEB0076
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
J TOP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD CAP SCREW 50284024
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/5/2025
CONRAD GAGNE Ext: 6797 01/28/2025 X 02/05/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0026, 0027
DEB0076
245.2C-0647-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
K
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
50294001 SLF LKG CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/3/2025
CONRAD GAGNE Ext: 679 7 01/29/2025 X 02/03/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776S56
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0029, 0030
DEB0076
245.2C-0647-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
L
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD
50294002
SLF LKG CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/3/2025
CONRAD GAGNE Ext: 679 7 01/29/2025 X 02/03/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776S56
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0032, 0033
DEB0076
245.22-0665-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP ...x. TM
OTHER __
D. SYSTEM/ITEM
B. EXHIBIT
M
E. CONTRACT/PR NO. F. CONTRACTOR
HEX HEAD CAPSCREW 50314011
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
15. TOTAL 0 1 0
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 EMARKS
1 Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/3/202S
STEVE YOUNG Ext: 3207 02/03/2025 X 02/03/2025
245.22 Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text
TBD
DEB0076
Typewritten Text 0035, 0036
DEB0076
| 25Q3117 43534001 Exhibit A |
| 25Q3117 43534002 Exhibit B |
| 25Q3117 43534003 Exhibit C |
| 25Q3117 50164021 Exhibit D |
| 25Q3117 50164022 Exhibit E |
| 25Q3117 50284021 Exhibit F |
| 25Q3117 50284022 Exhibit G |
| 25Q3117 50284023 Exhibit H |
| 25Q3117 50284024 Exhibit J |
| 25Q3117 50294001 Exhibit K |
| 25Q3117 50294002 Exhibit L |
| 25Q3117 50314011 Exhibit M |
File details come from the government source that posted it. Updated .