SPMYM2-17-Q-2190-0003.docx

SPMYM217Q2190

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

1. The Contractor’s POC is

2. Buyer POC is: SUSAN PETERSON

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil. Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 3 45 days inspection

5. Navy Commercial Access Control System (NCACS) Project

Commander, Navy Installations Command (CNIC), has established the Navy Commercial Access Control System (NCACS), a standardized process for granting unescorted access privileges to vendors, contractors, and suppliers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities. Visiting vendors may obtain daily passes directly from the individual Navy installation by submitting identification credentials for verification and undergoing a criminal screening/background check. Alternatively, if the vendor chooses, it may voluntarily elect to obtain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials at its own cost through a designated independent contractor NCACS service provider. Credentials will be issued every five years and access privileges will be reviewed/renewed on an annual basis. The costs incurred to obtain Navy installation access of any kind are not reimbursable, and the price(s) paid for obtaining long-term NCACS credentials will not be approved as a direct cost of this contract. Further information regarding NCACS can be found at http://cnic.navy.mil/CNIC_HQ_Site/ (under “Popular Links”) or http://rapidgate.com

All deliveries to CNRNW commands must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection. Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US Citizen and have either:

(a) RAPIDGate badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID -Original proof of citizenship (any one of the following is acceptable):

-Current vehicle registration and insurance -Bill of lading that has the delivery address on it

Please note: The RAPIDGate badge does not give access through the second, OA gate to lower base Bangor or to the CIA area at PSNS. To access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is jennifer.way@dla.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

YOU CAN NOW UTILIZE THE ON-LINE ENROLLMENT FORM TO ENROLL IN THE RAPIDGate PROGRAM. THE WEBSITE IS HTTPS://EFORM.RAPIDGATE.COM FOR ENROLLMENT. THIS PROCESS IS A FAST WAY TO ENROLL AT 1 OR MANY INSTALLATIONS/FACILITYIES 24 HOURS A DAY 7 DAYS A WEEK.

SECTION SF 1449 - CONTINUATION SHEET

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

POP 04-OCT-2017 TO

03-OCT-2018

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640 FOB: Destination N4523A

To:

POP 04-OCT-2017 TO

03-OCT-2018

HAZ RECEIVING

1400 FARRAGUT AVE, BLDG 997N, C/580.3

BREMERTON WA 98314

360-476-0000

N4523A

The following Delivery Schedule item for CLIN 1001 has been changed from:

POP 04-OCT-2018 TO

03-OCT-2019

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640

N4523A

POP 04-OCT-2018 TO

03-OCT-2019

HAZ RECEIVING

1400 FARRAGUT AVE, BLDG 997N, C/580.3

BREMERTON WA 98314

360-476-0000

N4523A

The following Delivery Schedule item for CLIN 2001 has been changed from:

POP 04-OCT-2019 TO

03-OCT-2020

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640

N4523A

POP 04-OCT-2019 TO

03-OCT-2020

HAZ RECEIVING

1400 FARRAGUT AVE, BLDG 997N, C/580.3

BREMERTON WA 98314

360-476-0000

N4523A

The following Delivery Schedule item for CLIN 3001 has been changed from:

POP 04-OCT-2020 TO

03-OCT-2021

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640

N4523A

POP 04-OCT-2020 TO

03-OCT-2021

HAZ RECEIVING

1400 FARRAGUT AVE, BLDG 997N, C/580.3

BREMERTON WA 98314

360-476-0000

N4523A

The following Delivery Schedule item for CLIN 4001 has been changed from:

POP 04-OCT-2021 TO

03-OCT-2022

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

360-476-7640

N4523A

POP 04-OCT-2021 TO

03-OCT-2022

HAZ RECEIVING

1400 FARRAGUT AVE, BLDG 997N, C/580.3

BREMERTON WA 98314

360-476-0000

N4523A

The following have been added by full text:

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997)

(a) "Hazardous material", as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract).

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material Identification No.

(If none, insert "None")

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.

(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.

(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.

(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to--

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

(End of clause)

252.223-7001 HAZARD WARNING LABELS (DEC 1991)

(a) "Hazardous material," as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labeling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labeled in accordance with one of the Acts in paragraphs (b)(1) through

(5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph (c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

HAZARDOUS MATERIAL, PREPARATION FOR DELIVERY

1. The preservation, packaging, and packing of hazardous materials shall be in accordance with the requirements of one of the regulations listed below, depending upon the mode of shipment. In the event of any discrepancies between the contract requirements and these regulations, the applicable regulation shall govern. Shipments must be packaged, packed, marked, labeled and certified in proper condition for transportation according to the following appropriate regulation:

a. Department of Transportation Code of Federal Regulations, Title 49, parts 100-199, as applicable, for domestic shipments;

b. U.S. Postal Service Publication #52 for shipments via the U.S. mail system;

c. International Maritime Organization's (IMO's) International Maritime Dangerous Goods Code (IMDGC) for shipments intended for delivery overseas via water transportation;

d. International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods By Air or International Air Transport Association (IATA) Dangerous Goods Regulation for shipment via commercial air; and

e. AFJMAN 24-204 (formerly AFR 71-4)/TM 38-250/NAVSUP PUB 505/MCO P4030.19/DLAM 4145.3 (Preparing Hazardous Material for Military Air Shipments).

2. Address/Commodity marking and labeling requirements shall be in accordance with MIL-STD-129 and the appropriate governing regulation for the mode of shipment.

3. Unless otherwise stated below, assume surface transportation.

4. Limited Quantities. If an item offered for transportation falls within the guidelines of a limited quantity and is not regulated by the applicable mode of transportation, it shall be packaged to meet the requirements of Level A packaging listed in MIL-STD-2073-1.

5. In addition to the above, packaging (container and containment components) designs shall pass all applicable performance-oriented packaging (POP) tests in accordance with Title 49 CFR, the ICAO, IATA or IMDGC. Compressed gases are excluded from these tests. Each packaging of acceptable design shall bear certification markings outlined in the regulations. All certificates and test reports denoting test compliance shall be available for inspection by authorized government representatives.

6. Contractors shall submit any discrepancies between contractually specified packaging procedures and Title 49 requirements to the Contracting Officer for review and evaluation.

7. Non-Manufactured Wood Packing. All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to www.aphis.usda.gov/ppq/swp/eunmwp.html for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

The following have been deleted:

YM2 D17

YM2 D20

(End of Summary of Changes) image1.wmf