SPI.pdf
PDF 484 KB Posted
- Attached to
- F-16 Acuator, Electro-Me
- Solicitation number
- SPRHA4-26-Q-0705
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for military preservation and packaging requirements. The document specifies packaging standards for an Actuator, Electro-Mechanical, Linear (Part or Drawing No. 1685T100-5, National Stock No. 1680-01-085-4423 WF) under Military Preservation IAW MIL-STD-2073. The SPI is identified as Code ID 98747, SPI No. F01-055-9510, and was last revised on February 13, 2018, with distribution limited to the Department of Defense and U.S. DOD contractors only through 406 SCMS/GULAA at Hill AFB, Utah.
The packaging instruction defines two levels of protection: Level A (serviceable method) and Level B (unserviceable method), both utilizing ASTM D6880 (MOD) and ASTM D5118 specifications. Level A packaging requires gross dimensions of 2.595 cubic feet, 62 pounds, and maintains a design fragility of 35G, while Level B requires 1.699 cubic feet and 30 pounds with the same fragility rating. The document specifies detailed material requirements including barrier wrap, cushioning pads, adhesives (A-A-1936), preservatives (MIL-PRF-16173 Code 2 and MIL-PRF-23827 Code 11), tape (ASTM D5330 Type II), masking tape (ASTM D6123), and wrapping materials meeting A-A-3174 and MIL-PRF-121 standards. Special requirements include heat-treated and debarked wood packaging materials compliant with International Standards for Phytosanitary Measures (ISPM No. 15) to prevent invasive species contamination for international shipments. The document includes technical drawings (Details A and B) illustrating cushioning pad configurations and assembly procedures for both packaging levels.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| SPRHA426Q0705.pdf | ||
| MQR.pdf | ||
| EDL.pdf | ||
| EDR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 13 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. APPLY MIL-PRF-16173, CODE 2, PRESERVATIVE TO ALL CRITICAL SURFACES AND MIL-PRF-23827, CODE 11 TO
BEARINGS. COVER TREATED PARTS WITH BARRIER WRAP, REF.-6, SECURED WITH TAPE, REF.-7.
2. USE ADHESIVE A-A-1936 TO LAMINATE REF.-4 AND -5 TO BOTTOM PADS -2 AND -3 ASSEMBLED CUSHIONS WILL ACT AS
END CAPS FOR THE ITEM. ENSURE ASSEMBLED PADS ARE SECURELY ON THE ITEM WHEN REMOVING OR PLACING ITEM IN
PACKAGING.
File details come from the government source that posted it. Updated .