SPI.pdf
PDF 261 KB Posted
- Attached to
- F-15 Canopy Remover Federal contract opportunity
- Solicitation number
- FA821320R3030
About this file
This document contains a federal solicitation and related packaging requirements. The solicitation is for the F-15 Canopy Remover requirement and is sole source to Rockwell Collins Inc, CAGE: 13499; Facility Code: 17610. The packaging requirements outline standards for wood packaging material used in shipments to prevent the spread of invasive species, including requirements for heat treatment and certification by an accredited agency. Wooden materials must be debarked and treated at 56 degrees Celsius for 30 minutes. Reference is made to international standards ISPM No. 15 and MIL-STD-129 for marking of palletized loads.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 0004 Amended Solicitation_FA821320R3030.pdf | ||
| AIR SPEC.pdf | ||
| 1750009QALI.pdf | ||
| 01 Amended Solicitation_FA821320R3030.pdf | ||
| CADPADItemMarkingInstruction.pdf | ||
| QALIF15CRCdual.pdf | ||
| EDL.pdf | ||
| SOWSPI.pdf | ||
| JQR012029195.pdf | ||
| JQR003493938.pdf | ||
| CDRLS_002.pdf | ||
| REPSHIP11Mar14.pdf | ||
| Ammo Data Card.pdf | ||
| JQR003616048.pdf | ||
| CDRLs.pdf | ||
| ItemDescription.pdf |
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 24 MAY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5705, OR DOD 5200.1R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. MAY PLACE UP TO 12 EACH BOXED ITEMS INTO SHIPPING CONTAINER.
2. INDIVIDUALLY WRAP ITEM USING REF.-4. PLACE IN BARRIER BAG REF.-3, REMOVE AIR AND SEAL. PLACE IN SET UP BOX
REF.-2.
MUNITION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .