SPI - 12524409.pdf
PDF 91 KB Posted
- Attached to
- Motor, Direct Current
- Solicitation number
- SPRDL1-23-R-0089
About this file
This document provides packaging instructions for a motor, direct current. It specifies that the motor, 1.0 HP, DC is to be wrapped in materials including MIL-PRF-3420, Style C wrap and PPP-C-1797, Type I wrap. It outlines cleaning, drying, packing levels including use of ASTM D5118/D5118M, Type CF container, and marking in accordance with MIL-STD-129. Additional details include recommended cushioning materials, plugging of motor connecting pins, and filling of void space within the container. Related to this is a federal contract opportunity on the Defense Logistics Agency Land and Maritime's solicitation number SPRDL1-23-R-0089 for the motor, direct current specified in the packaging instructions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Non-Disclosure Agreement for Government Protected Information.pdf | ||
| SPRDL123R0089.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for
Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12524409 MOTOR, 1.0 HP, DC 19200 AM12524409
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
6105-01-443-8388 210713 A / L21K2173
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 9.4 0.314 8.4 X 8.4 X 7.7
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR CAPS/PLUGS: (SEE NOTE B)
MIL-STD-2073-1, METHOD 41 2 AR PRESERVATIVE: (SEE NOTE C)
13. CLEANING 3 AR WRAP: MIL-PRF-3420, STYLE C (SEE NOTE D)
* 4 1 WRAP: PPP-C-1797, TYPE I,
14. DRYING REFERENCE SIZE: 18 X 30 (SEE NOTE E)
* 4 1 BAG: MIL-DTL-117, TYPE I, CLASS E, STYLE 1
15. PACKING 5 AR CUSHIONING: (SEE NOTE F)
a. LEVEL A 6 1 CONTAINER: ASTM D5118/D5118M, TYPE CF, MIL-STD-2073-1 CLASS WR, GRADE V3c, STYLE RSC
b. LEVEL B 7 AR CLOSURE: ASTM D1974/D1974M, MIL-STD-2073-1 SEALING METHOD B
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. ALL DIMENSION AND SIZE REFERENCES ARE IN INCHES UNLESS OTHERWISE SPECIFIED.
B. CAP/PLUG THE CONNECTING PINS OF THE MOTOR, 1.0 HP, DC WITH PROTECTIVE CAPS/PLUGS AS SPECIFIED AND DIRECTED IN THE ITEM DRAWING. IF NO CAPS/PLUGS ARE PROVIDED, WRAP THE CONNECTING PINS OF THE MOTOR, 1.0 HP, DC IN ONE LAYER OF CELLULAR PLASTIC FILM CUSHIONING, PPP-C-795, CLASS 1; OR OPEN CELL PLASTIC CUSHIONING, A-A-3129, TYPE II, GRADE A; OR POLYPROPYLENE FOAM CUSHIONING, PPP-C-1797, TYPE I.
SECURE WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT
WITH THE MOTOR, 1.0 HP, DC.
C. APPLY PRESERVATIVES AS SPECIFIED AND DIRECTED IN THE ITEM DRAWING AND ALL SUB-ASSEMBLY ITEM
DRAWINGS.
D. APPLY A SINGLE LAYER OF THE SPECIFIED WRAPPING MATERIAL TO THE ITEM. SECURE WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH THE ITEM.
E. APPLY THE SPECIFIED CUSHIONING MATERIAL AS A WRAP TO THE MOTOR, 1.0 HP, DC. SECURE WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH THE ITEM.
F. FILL THE VOID SPACE WITHIN THE CONTAINER WITH SUFFICIENT CRUMPLED KRAFT PAPER, A-A-203; OR CELLULAR PLASTIC FILM CUSHIONING, PPP-C-795, CLASS 1; OR OPEN CELL PLASTIC CUSHIONING, A-A-3129; OR POLYPROPYLENE FOAM CUSHIONING, PPP-C-1797, TYPE I TO PREVENT ITEMS FROM SHIFTING DURING TRANSIT.
WSC: H8 ITEM SIZE: 6.6 X 6.5 X 5.3 ITEM WEIGHT: 8.0 APPROVED: NELSON OLIVEIRA
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages
File details come from the government source that posted it. Updated .