specs.pdf

Big South Fork National River and Recreation Area (BISO)

PROJECT TITLE: Purchase QTY (1) Portable Sewage Pumping Unit

2. BACKGROUND AND SCOPE:

Big South Fork National River and Recreation Area (BISO) will replace an obsolete and deteriorating portable sewage pumping unit. The unit will be replaced with a unit that conforms to current operational needs and requirements within the park.

3. Delivery Address:

The National Park Service will accept delivery of the completed sewage pump system at the East Rim Facilities Management Shop located at 4721 Leatherwood Road, Oneida TN 37841

4. PERIOD OF PERFORMANCE:

The contractor shall have no more than 60 calendar days to fully and successfully execute the project once the offeror receives the notice to proceed, with the only exceptions being unforeseen events beyond the contractor's control and/or delays that are caused by the National Park Service.

5. MINIMUM REQUIRED SPECIFICATIONS:

The unit shall be a skid mounted unit or installable on a utility trailer

The unit shall come equipped with a minimum 325-gallon waste collection tank

The unit shall come equipped with a minimum 150-gallon freshwater storage tank

The unit shall utilize a sanitary two pump design. One pump for wastewater and one for freshwater handling

The unit shall come equipped with a minimum 3” connection waste recovery pump capable of a minimum 8-20 GMP, with a 20’ vertical or 75’ horizontal lift

The pump(s) shall be powered by a small-bore gasoline engine(s).

The unit shall come equipped with a hose reel

The unit shall feature sight glasses or volumetric markers on the tanks to allow for liquid monitoring

The unit shall be equipped with a minimum 3x30’ collection hose made of EPDM and designed to be non-collapsible with female aluminum camlocks

The collection hose shall have check valve, as well as a utility grade ball valve for operation

The unit shall come equipped with a minimum 2”x10’ lay flat style hose for discharge

All hose and accessory fittings shall utilize aluminum camlocks

The unit shall feature a minimum 36” suction wand with male cam lock connection

Solicitation 140P5322Q0014

Equipment: All vehicles and equipment to be used in National Park shall be thoroughly pressure washed prior to arrival. Particular attention must be shown to the under carriage and any surface where soil containing exotic weed seeds may exist. All loaded trucks and trailers shall be covered (tarped) when loaded. These efforts are critical to prevent the introduction and establishment of non-native plant species into the park. All equipment used in the work shall be of the proper type, of a sufficient size, in good operating condition, and otherwise meet the equipment specifications for each type of maintenance work. The Contracting Officer may order removal and/or replacement of any unsatisfactory equipment at the Contractor's expense. All equipment must meet all Federal and State licensing and safety requirements.

Safety: The Contractor shall exercise due caution and care when working to prevent undue conflict with public users of roads. Roads shall remain passable to traffic during the Contractor's operations. The Point of Contact has authority to have deliveries stopped when weather or road conditions are unsuitable for the hauling of aggregate. If operations are stopped for any reason, the Contractor will be notified by the Point of Contact twenty- four (24) hours prior to resuming operations.

Damage to Property: The Contractor shall be responsible for any damage caused by his/her personnel or equipment to any existing structures such as culverts, signs, cattle guards, and riprap protecting culvert inlets and/or outlets. Damaged items shall be repaired or replaced by the Contractor at no additional cost to the Government.

Pollution and Erosion Control: During all operations under this contract, the Contractor shall take reasonable measures to prevent or minimize soil erosion and pollution of water and other resources. All refuse, including garbage, rubbish, and solid or liquid wastes, from the Contractor's operations, shall be stored, collected, and disposed of in a sanitary and nuisance-free manner. Refuse shall be disposed of in State-approved landfills or as approved by the COTR.

Basis of Payment: The accepted quantities will be paid for at the contract unit price(s) quoted. Firm Fixed Price.

Documents to Submit:

1. Signed SF-1449

2. Quote, to include the companies DUNS, and contact information.

3. Specification for proposed equipment

4. Approximate delivery date

Email all Quotes to: geraldine_larsen@nps.gov

Reference Solicitation # 140P53Q0014 in all correspondences and documents

Close Date: 3/10/2022 NOON EST.

No phone calls accepted.