Specifications2.pdf

Specifications Plow/Pusher Combo Unit

Equipment shall be furnished fully assembled, operational, and service

1. 10' blade

Two sets of Operators, Service, and Parts manuals for the Snow/Pusher Combo liiust to be supplied.

Must have 10' blade

Must have Cross-over relief valve

Must have oscillation angle of 6 degrees

Must have a pivot frame length of 31" maximum

Must be made of 10ga/ grade 50 steel and cutting edges made of high carbon steel Must have 4 trip springs

Must have 2 angle cylinders

Must have a blade height of 31" minimum with a 40" maximum with pusher on

Must have an maximum width of 128"

Must have replaceable poly skids and side panels

Must be able to be used as a plow or pusher by attaching and detaching the pusher assembly onto the plow assembly

2. 12' blade

Equipment shall be furnished fully assembled, operational, and serviced. Two sets of Operators, Service, and Parts manuals for the Combo Unit, to be supplied.

Must have 12' blade

Must have a pivot frame length of 48"

Must have oscillation angle of 6 degrees and angle 36 degrees

Must be made of 10ga/ grade 50 steel and cutting edges (2) made of high carbon steel

Must have 8 trip springs

Must have 2 angle cylinders with 3" bore and 1 ½" rods

Must have a blade height of 36" minimum with a 41" maximum with pusher on

Must have an maximum width of 1541/8"

Must have replaceable poly skids

3. 14' blade Equipment shall be furnished fully assembled, operational, and servic

Two sets of Operators, Service, and Parts manuals for the Reck Cutte1 liiUSt be supplied.

Must have 14' blade

Must have a pivot frame length of 48"

Must have oscillation angle of 6 degrees and angle 36 degress

Must be made of lOga/ grade 50 steel and cutting edges (2) made of high carbon steel Must have 8 trip springs

Must have 2 angle cylinders with 3" bore and 1 ½" rods

Must have a blade height of 36" minimum with a 41" maximum with pusher on Must have an maximum width of 178 1/8"

Must have replaceable poly skids