Specifications-Platform Truck.docx

Specifications for new servicing platform truck mounted 4x2

Request servicing platform that allow two workers to work at height of around 27 meters.

Specifications about the vehicle:

The system should be installed on 3.5 t chassis => only requiring driving B license The pollution level should be compliant without latest norm. (EURO 6) The vehicle should be able to take motor way.

The vehicle should be equipped with constant speed control to keep the engine speed constant required for power take-off (operating of the hydraulic pump).

Transmission should be 6 speed manual or automatic if possible.

The vehicle should be equipped with reinforced shock absorbers and springs to enhance the ride quality.

The vehicle should be equipped with mud and snow tires.

The vehicle should be equipped with exterior mirror heated and electrically adjustable and have extended mirror bracket.

The vehicle should have tinted window panes to ensure less heating of the cabin when exposed to strong solar irradiation.

The vehicle should be steering arrangement left.

The vehicle shout have end-outline and side marker lamps to increase road safety The driver seat should man-made leather black to be easy to clean. It should have armrest.

Vehicle should be equipped with airbag and seat belt.

Vehicle should be equipped with rotating beacon.

The vehicle should have radio system and Bluetooth hands-free function.

The vehicle should be equipped with 4 hydraulic stabilizing jacks to warrant stability. The leveling of the vehicle should be full automatic. It should be possible to operate the system even on inclinations of 5 degrees.

If possible, high quality painting in RAL 2011 (deep orange) color-tone.

Main specifications about reachability:

Telescopic, single articulation system should allow us to work at height should be around 27 meters Outreach should be around 16 meters.

All these parameters should be electronically controlled in order to not expose workers to danger.

All commands should be proportional (smooth operation) The workbasket load capacity should be 230 kg (two peoples with tools) The basket should be able to rotate via electric cylinder (70 degrees in both directions) Ideally, the system should be delivered with two working cages.

One aluminum to reduce weight. One polyester for the electricians.

Access to working cage should be comfortable. The floor to access the working cage should be anti slip.

The working cage should be insulated at a voltage of 1000 V AC and 1500 VDC.

230 V electrical outlet should be available in working cage.

Water and/or air compressed socket should be available in working cage.

Working cage should be equipped with attached and movable tool tray It should be possible to operate the system on battery for short period. And it should be possible to work for indefinite period of time while the system is connected to electrical cable (16A standard cable). Hybrid type in order to work inside hangar without CO2 emission and with low noise.

Control system should provides automatic switching between battery and engine (when the battery are out of energy) It should be possible to operate the system with the help of hand pump in case of emergency.

Intuitive and easy to use display to control all movements should be available in working cage and on the vehicle.

4 polyester supporting plates for stabilizing jacks should be delivered.

6 traffic leading cone, 500 mm high should be available on one holder on the vehicle.

If possible, high quality painting in RAL 2011 (deep orange) color-tone for the system.

DOCUMENTATIONS/ CERTIFICATIONS:

- Certification by Belgium certified company (Vincotte, BTV…)

- Technical road inspection.

- COC - Certificate Of Conformity. Unique document valid for Europe.

- CE mark

- 2 copies of the manual for the truck and crane in French and English

- 2 copies of spare part list

INSTRUCTION:

Instructions and training to employees to show how to operate platform and vehicle. Instructions on site has to be in French language.

AFTER SALES/WARRANTY:

- Vendor has to be locally present within a 200 km radius of Chievres Air Base (USAG Benelux) to provide emergency support when required.

- Warranty of two years on the truck (parts, labor and displacement).