SPECIFICATIONS NAME TAPE 2018.pdf

NAME TAPE SPECIFICATIONS 2018

1. TAPES - NAME AND FOREIGN COUNTRY

a). Cloth: Operation enduring freedom camouflage pattern (OCP), Refer to MIL-DTL-44436B.

b). Material: Nylon-Cotton wind resistant poplin overall.

c). Shrinkage: Max five percent (5%).

d). 5 to 5 ¼ x 1” (+/- 1/32”)

2. EMBROIDERY

a). Thread: Black Han Cable 67147 b). Sewing thread color: Bagby Green HDD 67204 c). Centered on tape (min ¾ “height).

d). Adequate density and width to be clearly visible from a minimum of ten (10) feet.

2. SAMPLES

The prospective awardee will be notified by the Contracting Officer to submit a one unit sample of each required item. The sample will be submitted within ten (10) days after notification to the location specified by the Contracting Officer. The samples will be provided FOB Destination.

Since the OCP pattern is a new requirement, no waivers will be accepted. All prospective awardees need to submit a sample.

4. NAME PRINTING - LAST NAME ONLY

a). Last name only of list of names provided b). Five (5) nametapes per cadet name (approximately 1,250 cadets) or nine (9) for cadets that require foreign country tapes. Breakdown is as follows:

1). CLIN 0001: Four (4) OCP Pattern with black embroidery and Velcro back, Foreign Country 2). CLIN 0002: Five (5) OCP Pattern with black embroidery and Velcro back, Last Name c). Name Lists: Vendor will be provided an alphabetical list as soon as possible with as many names as possible. There will be multiple lists of names sent starting in April through July.

5. Packaging: Name tapes to be banded each by name and packaged alphabetically.