Specifications.pdf

Specifications Global Peace Operations Initiative (GPOI)

Vehicles

1. Contractor shall provide the following vehicle in accordance with or equal to the item specified below:

Two (2) 2019 or newer Pick-Up 4x4 Double Cab vehicles

2. Stickers must be on vehicle and properly licensed. Title shall be transferred at delivery date by vendor. Vehicle must also meet Federal Local Exhaust Ventilation (LEV)/Clean Fuel Fleet Program (CFFP) Emission Certification Requirements and be placarded stating compliance.

3. Delivery Schedule: Shipment of all items and installation is required within 90 days from date of award.

4. Delivery Inspection and Initial Acceptance: After delivery to the below address in Bouar, Central African Republic (CAR), the Security Cooperation Office (SCO) representative will take final acceptance of the units.

5. Place of Delivery: The contractor shall prepare and arrange final delivery of equipment to the following point of contact and delivery address. Contractor MUST ensure that the equipment is delivered to the address as shown below:

Notify Party for Acceptance- Peruvian Engineer Company in Bouar-Central African Republic (CAR)

ADDRESS:

Peru Engineering Company Bouar -Sector West, Central African Republic (CAR)

6. VEHICLE SPECIFICATIONS

A. Steering- Left hand drive

i. Audio Controls on steering wheel

ii. Electric power-assisted steering

(EPAS)

B. Bed Length

1. Short Bed 60.5 in. (Double

Cab) C. Engine

1. 2.7-L or greater, DOHC 16V 4cyl Diesel

2. Turbo Diesel Intercooler - Common Rail

D. Transmission

1. 6-speed automatic

2. Rear-Wheel Drive or 4WDemand part-time 4WD E. Emissions: EURO IV F. Exterior Features

1. Color: White (because all United Nations vehicles are white with blue “UN” letters on the doors)

2. 4 Door

3. Side Steps

4. Dark gray grille with black surround

5. Color-keyed power outside mirrors

6. 16-in. styled steel wheels (vehicles will be driven in austere conditions; therefore, proper equipment and tires are required)

7. Engine/front suspension skid plate

8. Sliding rear window

9. Deck rail system

10. Fiber-reinforced Sheet-Molded Composite (SMC) bed

G. Interior Features

1. Power windows and door locks

2. Standard – (color to be dark)

3. Multi-information display

4. Seats at least 5 passengers

5. AM/FM radio with clock

6. Airbag System

H. Dimensions & Weights

1. Towing mass ( braked ) : at least 3500 kg

2. Fuel tank capacity : at least 80 L

3. Gross vehicle mass : at least 3,200 kg

4. Gross combination mass : at least 6,000 kg

5. Overall length : at least 5,354 mm

6. Overall height : at least 1,851 mm

7. Overall width including outer mirror : at least 2,163 mm

8. Overall width excluding outer mirror : at least 1,860 mm

9. Wheelbase: at least 3,220

10. Cargo-floor length: at least 1,549 mm

11. Cargo-floor width: at least 1,560 mm

12. Cargo width between wheel arches : at least 1,139 mm

13. Cargo depth: at least 511 mm

14. Ground clearance fully loaded : at least 237 mm

15. Wading depth: at least 800 mm

I. Warranty and Maintenance

1. The provided vehicles shall have industry standard initial warranties that can be exercised in Bouar, CAR.

2. Maintenance and parts for the vehicles shall be available in Bouar, Central African Republic.

3. The contractor shall identify an in-country service provider that can provide follow-on maintenance and support for no less than three years.

J. Spare Parts Package:

1. The contractor shall provide at least one year of spare parts.

7. Customs Clearance: The contractor is responsible for complying with Department of Commerce export rules and regulations. US Government has done its due diligence and assumes responsibility for donating these units per the GPOI program, Federal Aviation Administration (FAA) and European Association of Competent Authorities (EACA). The SCO of Bouar, Central African Republic will facilitate delivery of the SUVs to the designated facilities in conjunction with the Quality Assurance tests and subsequently donate them using standard security assistance documentation and procedures. The SCO of Bouar, Central African Republic will coordinate with appropriate Government and military authorities for all customs, entry and operating permissions, and importation taxes and tariffs (or waivers), as required.

8. Preparation for Delivery: Marking for shipment shall be in accordance with the best commercial practices for the type of transportation for shipping and shall be such that equipment will arrive undamaged in Bouar, CAR. If shipping is made from outside of Central Africa Republic be aware that there is NO port in Bouar, the closest one is in Bangui Central Africa Republic, approximately 9 hrs away.

9. Shipping and Transportation: Any and all shipping, transportation, or associated costs shall be included in the total contract cost.